AWEA LP-6025YZF
Image: awea.com, AWEA
Key Specifications
Max Spindle
Spindle Taper
Tool Capacity
Table Size
Spindle Power
x axis travel
How much does the AWEA LP-6025YZF cost?
Price estimate
We do not have a price for the AWEA LP-6025YZF that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
53,000 kg (116,843 lb) is the listed weight of the AWEA LP-6025YZF, the heaviest 5-face machine AWEA builds on 2,700 mm (106.3 in) column spacing. Add the 20,000 kg (44,092 lb) its table can carry and the installation becomes the first thing to plan, before spindle or head choices.
The envelope explains the mass. X travel is 6,000 mm (236.2 in), Y is 3,200 mm (126.0 in) and Z is 1,000 mm (39.4 in), over a 6,020 x 2,400 mm (237.0 x 94.5 in) table. The LP-6025YF with 760 mm (29.9 in) of Z weighs 49,000 kg (108,025 lb), and the LP-5025YZF, one length shorter, also weighs 49,000 kg.
Services are modest by comparison. The table lists compressed air at 5 ~ 8 (5) kg/cm², a 120 liter hydraulic tank with a 10 HP pump, a 6 liter lubrication tank and a 750 liter coolant tank with a 1.5 HP pump. Those are the same figures as on the LP-3025YZF, so chip and coolant handling for a part twice as long deserves a question to the supplier.
Motion is unhurried. X and Z rapid at 10,000 mm/min (394 ipm), Y at 15,000 mm/min (591 ipm), and cutting feed runs 1 ~ 5,000 mm/min (0.04 ~ 197 ipm). The standard spindle is the 4,000 rpm BT50 high torque unit with a 22 / 26 kW (30 / 35 HP) motor. A 32-tool vertical / horizontal ATC is standard, and long cycles on parts this size are the reason AWEA offers 60, 90 and 120 tool systems.
Full Specifications
| Parameter | Value |
|---|---|
| X Axis Travel | 6,000 mm (236.2 in) |
| Y Axis Travel | 3,200 mm (126.0 in) |
| Z Axis Travel | 1,000 mm (39.4 in) |
| Table Size | 6,020 x 2,400 mm (237.0 x 94.5 in) |
| Max Table Load | 20,000 kg (44,092 lb) |
| Distance Spindle Nose to Table | 200 ~ 1,200 mm (7.9 ~ 47.2 in) |
| Distance Between Columns | 2,700 mm (106.3 in) |
| Spindle Motor Power | 22 / 26 kW (30 / 35 HP) |
| Max Spindle Speed | 4,000 rpm (Std.) Built-in 6,000 / 8,000 rpm (Opt.) Direct Drive 8,000 / 10,000 rpm (Opt.) |
| Spindle Taper | BT50 (ISO50) / DIN69871-A (Opt.) |
| Rapid Traverse X | 10,000 mm/min (394 ipm) |
| Rapid Traverse Y | 15,000 mm/min (591 ipm) |
| Rapid Traverse Z | 10,000 mm/min (394 ipm) |
| Cutting Feed Rate | 1 ~ 5,000 mm/min (0.04 ~ 197 ipm) |
| Tool Capacity | 32 (60 / 90 / 120 Opt.) |
| Max Tool Diameter (full magazine) | Ø127 / Ø215 mm (Ø5.0 / Ø8.5 in) |
| Max Tool Length | 350 mm (13.8 in) |
| Max Tool Weight | 20 kg (44 lb) |
| Positioning Accuracy Jis B 6338 | ± 0.015 mm / Full Travel |
| Positioning Accuracy VDI 3441 | P ≤ 0.050 mm / Full Travel |
| Repeatability Jis B 6338 | ± 0.003 mm |
| Repeatability VDI 3441 | Ps ≤ 0.035 mm |
| Air Pressure Requirement | 5 ~ 8 (5) kg/cm² |
| Hydraulic Tank Capacity | 120 liter (10 HP) |
| Lubrication Tank Capacity | 6 liter |
| Coolant Tank Capacity | 750 liter (1.5 HP) |
| Machine Weight | 53,000 kg (116,843 lb) |
Specifications sourced from awea.com — verified 2026-10-04
Strengths & Limitations
Strengths
- Largest envelope of the group: 6,000 x 3,200 x 1,000 mm travel with a 20,000 kg (44,092 lb) table load
- 200 ~ 1,200 mm (7.9 ~ 47.2 in) from spindle nose to table for tall workpieces
- Vertical / horizontal ATC with 32 tools standard and 60, 90 or 120 tools optional
- 4,000 rpm high torque spindle as standard, with built-in and direct drive spindles as options
- JIS repeatability of ± 0.003 mm, the same as on the LP-3025YZF
Limitations
- 53,000 kg (116,843 lb) of machine plus up to 20,000 kg (44,092 lb) of work calls for a substantial foundation
- X and Z rapids of 10,000 mm/min (394 ipm) and a cutting feed limit of 5,000 mm/min (197 ipm)
- VDI positioning accuracy of P ≤ 0.050 mm over full travel
- Coolant tank stays at 750 liter although the table is 6,020 mm long
- For 7,000 mm (275.6 in) of X the only YZF choice is the wider LP-7033YZF
Best For
Frequently Asked Questions
01
The machine weighs 53,000 kg (116,843 lb) and the table is rated for 20,000 kg (44,092 lb). The table lists air at 5 ~ 8 (5) kg/cm², a 120 liter hydraulic tank, a 6 liter lubrication tank and a 750 liter coolant tank. The power row gives a voltage and tolerance only, so the connected load has to be confirmed with AWEA for the spindle and options ordered.
02
Not on this column spacing. The LP-6033YZF has 3,900 mm (153.5 in) of Y and 3,500 mm (137.8 in) between the columns at 55,000 kg (121,252 lb). The LP-7033YZF adds X travel of 7,000 mm (275.6 in), weighs 65,000 kg (143,298 lb) and has an X rapid of 7,500 mm/min (295 ipm). Table load is 20,000 kg (44,092 lb) on all three.
03
Rapid traverse is 10,000 mm/min (394 ipm) on X and Z and 15,000 mm/min (591 ipm) on Y. Cutting feed is 1 ~ 5,000 mm/min (0.04 ~ 197 ipm). By comparison the LP-3025YZF, the shortest machine of the group, has an X rapid of 20,000 mm/min (787 ipm) and a cutting feed up to 10,000 mm/min (394 ipm).
04
In the VDI rows, yes. The LP-6025YZF is listed at P ≤ 0.050 mm positioning over full travel and Ps ≤ 0.035 mm repeatability, while the LP-3025YZF is listed at P ≤ 0.025 mm and Ps ≤ 0.020 mm. The JIS rows are the same for both: ± 0.015 mm over full travel and ± 0.003 mm.
More from AWEA
Other 5-Axis Machining Centers
Breton Ultrix E3
Hedelius TILTENTA 9-4600
DN Solutions DBM 2030 U
Mazak CV 5-500
Tongtai CT-350
