AWEA MCP-14050
Key Specifications
Spindle Taper
Tool Capacity
Table Size
Spindle Power
x axis travel
y axis travel
How much does the AWEA MCP-14050 cost?
Price estimate
We do not have a price for the AWEA MCP-14050 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
Height is the reason to look at the AWEA MCP-14050 instead of AWEA's other 14-metre machine. Its Z travel is 1,400 mm (55.1 in), and the spindle nose works between 800 and 2,200 mm (31.5 ~ 86.6 in) above the table. The LG-14050 has the same 14,000 mm (551.2 in) of X but 1,000 mm (39.4 in) of Z and a nose range of 200 ~ 1,200 mm (7.9 ~ 47.2 in). One machine is laid out for tall fabrications, the other for work close to the table.
That much ram extension asks a lot of the head. AWEA's answer is a headstock that sits in a U-shaped saddle with reinforced front structures surrounding it, guided by four linear guide ways and ten sliding blocks. The maker says the design reduces distortion even when the headstock is fully extended. If the parts are taller still, a 1,600 mm Z stroke is offered as an option and the nose range becomes 600 ~ 2,200 mm.
Spindle choice follows the material. The standard unit is a gear spindle, shown in the table as "4,000 Gear Spindle (Std.)" with no unit printed; 5,000 / 6,000 gear spindles and 8,000 / 12,000 built-in spindles are options. Every version uses the BBT50 taper, and the motor row reads 22 / 26 kW (29.5 / 34.9 hp).
In plan, the MCP-14050 covers 14,000 mm of X and 5,400 mm (212.6 in) of Y over a 14,000 x 3,800 mm (551.2 x 149.6 in) table.
Full Specifications
| Parameter | Value |
|---|---|
| X Axis Travel | 14,000 mm (551.2 in) |
| Y Axis Travel | 5,400 mm (212.6 in) |
| Z Axis Travel | 1,400 mm (55.1 in) (1,600 mm Opt.) |
| Table Size | 14,000 x 3,800 mm (551.2 x 149.6 in) |
| Distance Spindle Nose to Table | 800 ~ 2,200 mm (31.5 ~ 86.6 in) (600 ~ 2,200 mm Opt.) |
| Distance Between Columns with X Axis Covers | 4,700 mm (4,500 mm) |
| Spindle Taper | BBT50 |
| Spindle Motor Power | 22 / 26 kW (29.5 / 34.9 hp) |
| Spindle Speed Vertical | 4,000 Gear Spindle (Std.)；5,000 / 6,000 Gear Spindle (Opt.)；8,000 / 12,000 Built-in Spindle (Opt.) |
| Rapid Traverse Xyz | 10 / 7.5 / 10 m/min (394 / 295 / 394 ipm) |
| Cutting Feed Rate | 1 ~ 10 m/min (39 ~ 394 ipm) |
| Tool Capacity | 40T (60T Opt.) |
| Max Tool Diameter (full magazine) | Ø125 / Ø200 mm (Ø4.9 / Ø7.9 in) |
| Max Tool Length | 400 mm (15.7 in) |
| Max Tool Weight | 20 kg (44 lb) |
| Coolant Tank Capacity | 4,000 liter |
| Lubrication Tank Capacity | 6 liter |
| Hydraulic Tank Capacity | 100 liter |
| Air Pressure Requirement | 5 ~ 8 (5) kg/cm² |
| Power Requirement | 220 ± 10 % Vac / 80 kVA |
Specifications sourced from awea.com — verified 2026-10-04
Strengths & Limitations
Strengths
- Spindle nose reaches 2,200 mm (86.6 in) above the table, against 1,200 mm (47.2 in) on the LG-14050
- 1,400 mm (55.1 in) Z travel as standard and 1,600 mm as an option
- Headstock enclosed by a U-shaped saddle with four linear guide ways and ten sliding blocks
- Choice of gear and built-in spindles on a BBT50 taper
- 5,400 mm (212.6 in) of Y, wider than the 5,000 mm (196.9 in) of the LG-14050
Limitations
- X rapid is 10 m/min (394 ipm); the LG-14050 is listed at 20 m/min (787 ipm)
- With the standard Z stroke the spindle nose comes no closer than 800 mm (31.5 in) to the table
- The faster gear spindles and both built-in spindles are options
- No positioning accuracy is published for this model, while the LG-14050 table does give accuracy rows
Best For
Frequently Asked Questions
01
The MCP-14050. It has 1,400 mm (55.1 in) of Z travel and a spindle nose range of 800 ~ 2,200 mm (31.5 ~ 86.6 in). The LG-14050 has 1,000 mm (39.4 in) of Z and a range of 200 ~ 1,200 mm (7.9 ~ 47.2 in), which suits flatter work. Both have 14,000 mm (551.2 in) of X travel and a 22 / 26 kW spindle motor.
02
AWEA describes a headstock that sits in a U-shaped saddle with reinforced front structures, fully surrounding it, with four linear guide ways and ten sliding blocks. The maker states that the rigidity of the head structure has been increased by 40% and that distortion is reduced even at full extension.
03
The table lists a gear spindle as standard at 4,000, optional gear spindles at 5,000 / 6,000 and optional built-in spindles at 8,000 / 12,000. AWEA prints these speeds without a unit. All use BBT50 and the motor is given as 22 / 26 kW (29.5 / 34.9 hp).
04
Yes. AWEA lists 1,600 mm as an optional Z stroke in place of the standard 1,400 mm (55.1 in). With it the distance from spindle nose to table top becomes 600 ~ 2,200 mm, so the extra travel is gained at the bottom of the range, closer to the table.
More from AWEA
Other 5-Axis Machining Centers
Fehlmann VERSA 745
DN Solutions DCM 2760 U
Matec 30PT | 40PT
Chiron FZ 18W
Tajmac-ZPS MCG2318i
