AWEA LP-6033YZF
Image: awea.com, AWEA
Key Specifications
Max Spindle
Spindle Taper
Tool Capacity
Spindle Power
x axis travel
y axis travel
How much does the AWEA LP-6033YZF cost?
Price estimate
We do not have a price for the AWEA LP-6033YZF that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
Installing an AWEA LP-6033YZF is a building project as much as a machine purchase. The machine weighs 55,000 kg (121,252 lb) and accepts a further 20,000 kg (44,092 lb) on its table. Its axes cover 6,000 mm (236.2 in) in X, 3,900 mm (153.5 in) in Y and 1,000 mm (39.4 in) in Z, with 3,500 mm (137.8 in) between the columns.
Start with the services. Coolant is held in a 1,000 liter tank with a 1.5 HP pump. The hydraulic unit, which among other duties balances the head through counter weight cylinders, has a 120 liter tank and a 10 HP pump. Slide lubrication draws from a 6 liter tank.
Then the handling. AWEA notes that bases for X travels longer than 6,000 mm may be delivered in two sections; this model sits at that limit, and the LP-7033YZF is beyond it. Within the YZF group, weight climbs steeply with length: the LP-5033YZF is listed at 48,000 kg (105,820 lb). The LP-7033YZF reaches 65,000 kg (143,298 lb) without raising the table load.
In the cut, the machine behaves like its shorter YZF relatives. The standard spindle is the 4,000 rpm gear type with BT50 taper and 22 / 26 kW (30 / 35 HP). X rapid is 10,000 mm/min (394 ipm), Y 15,000 mm/min (591 ipm), Z 10,000 mm/min (394 ipm). The stated VDI accuracy is P ≤ 0.050 mm over full travel, with Ps ≤ 0.035 mm repeatability.
Full Specifications
| Parameter | Value |
|---|---|
| X Axis Travel | 6,000 mm (236.2 in) |
| Y Axis Travel | 3,900 mm (153.5 in) |
| Z Axis Travel | 1,000 mm (39.4 in) |
| Max Table Load | 20,000 kg (44,092 lb) |
| Distance Spindle Nose to Table | 200 ~ 1,200 mm (7.9 ~ 47.2 in) |
| Distance Between Columns | 3,500 mm (137.8 in) |
| Spindle Motor Power | 22 / 26 kW (30 / 35 HP) |
| Max Spindle Speed | 4,000 rpm (Std.) Built-in 6,000 / 8,000 rpm (Opt.) Direct Drive 8,000 / 10,000 rpm (Opt.) |
| Spindle Taper | BT50 (ISO50) / DIN69871-A (Opt.) |
| Rapid Traverse X | 10,000 mm/min (394 ipm) |
| Rapid Traverse Y | 15,000 mm/min (591 ipm) |
| Rapid Traverse Z | 10,000 mm/min (394 ipm) |
| Cutting Feed Rate | 1 ~ 5,000 mm/min (0.04 ~ 197 ipm) |
| Tool Capacity | 32 (60 / 90 / 120 Opt.) |
| Max Tool Diameter (full magazine) | Ø127 / Ø215 mm (Ø5.0 / Ø8.5 in) |
| Max Tool Length | 350 mm (13.8 in) |
| Max Tool Weight | 20 kg (44 lb) |
| Positioning Accuracy VDI 3441 | P ≤ 0.050 mm / Full Travel |
| Repeatability Jis B 6338 | ± 0.003 mm |
| Repeatability VDI 3441 | Ps ≤ 0.035 mm |
| Air Pressure Requirement | 5 ~ 8 (5) kg/cm² |
| Hydraulic Tank Capacity | 120 liter (10 HP) |
| Lubrication Tank Capacity | 6 liter |
| Coolant Tank Capacity | 1,000 liter (1.5 HP) |
| Machine Weight | 55,000 kg (121,252 lb) |
Specifications sourced from awea.com — verified 2026-10-04
Strengths & Limitations
Strengths
- 20,000 kg (44,092 lb) table load, equal to the longer LP-7033YZF
- 6,000 mm (236.2 in) of X with a 10,000 mm/min (394 ipm) rapid; the LP-7033YZF slows to 7,500 mm/min (295 ipm)
- 200 ~ 1,200 mm (7.9 ~ 47.2 in) between spindle nose and table
- 1,000 liter coolant tank and a 120 liter hydraulic unit with a 10 HP pump
- Milling heads that AWEA develops and assembles itself, with hand-scraped contact surfaces
Limitations
- 55,000 kg (121,252 lb) machine weight, against 52,000 kg (114,638 lb) for the LP-6033YF
- P ≤ 0.050 mm VDI positioning accuracy; the longer LP-7033YZF is listed at P = 0.040 mm
- Z rapid of 10,000 mm/min (394 ipm) and cutting feed no higher than 5,000 mm/min (197 ipm)
- Maximum tool weight of 20 kg (44 lb) restricts very large face mills and boring bars
Best For
Frequently Asked Questions
01
The table gives P ≤ 0.050 mm for the LP-6033YZF and P = 0.040 mm for the LP-7033YZF, with repeatability Ps ≤ 0.035 mm against Ps = 0.030 mm. AWEA's footnote explains the difference: from 7,000 mm of X travel upward an X-axis linear scale is a standard accessory. The 6,000 mm machine's figures are stated without that scale.
02
The machine is listed at 55,000 kg (121,252 lb) and the table is rated for 20,000 kg (44,092 lb) of workpiece and fixture. Add the 1,000 liter of coolant and the 120 liter of hydraulic oil. AWEA's spec table gives no floor plan dimensions for this model, so the layout drawing has to come from the maker.
03
The LP-6033YF has 760 mm (29.9 in) of Z, a 6,000 rpm spindle and weighs 52,000 kg (114,638 lb). The LP-6033YZF has 1,000 mm (39.4 in) of Z, a 4,000 rpm gear spindle as standard and weighs 55,000 kg (121,252 lb). Table load is 20,000 kg (44,092 lb) on both. Part height and the torque needed for roughing decide it.
04
X and Y use roller type linear guide ways. The two Y-axis ways are offset from each other, which AWEA says stiffens the cross beam and brings the spindle closer to it. Z is a hardened and ground box way; roller type linear guide ways on Z are an option tied to the direct drive spindle.
More from AWEA
Other 5-Axis Machining Centers
Fooke ENDURA 600LINEAR
Fehlmann PICOMAX 550
DN Solutions DBM 2540 U
Matsuura MX-330 PC10
Chiron DZ 25S
