Röders RXP801
Key Specifications
Max Spindle
Spindle Taper
Tool Capacity
Table Size
Spindle Power
machining range
How much does the Röders RXP801 cost?
Price estimate
We do not have a price for the Röders RXP801 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
The Röders RXP801 is the 3-axis mould and die machine of the RXP range, with a machining range of 800 mm x 635 mm x 400 mm (31.5 x 25.0 x 15.7 in) and a table of 796 mm x 596 mm (31.3 x 23.5 in). Röders presents it as the ideal machine for moulds and workpieces clamped on EROWA UPC pallets, which says a good deal about how it is meant to be used: palletised inserts and plates, loaded by hand or by a handling system, finished at high spindle speed.
Up to 800 kg (1,764 lb) can go on the table. The standard spindle runs at 36,000 rpm with 15 kW (20.1 hp) and an HSK E50 interface for tools up to 20 mm in diameter. That is a larger interface than the HSK E40 of the RXP500, and Röders offers spindles up to HSK A63 on this model for shops that want to rough and finish on one machine.
Feeds reach 60,000 mm/min, where the RXP400 and RXP500 stop at 42,000 mm/min. On a machining range this size, the higher feed shortens the air moves between cavities and across large electrodes.
The tool changer has 36 places for HSK E50, with a chain changer of 76 or more places as an option that can be loaded during machining. Two screws carry chips into a chip box behind the machine; a conveyor is extra. Weight is about 8.4 t. The required space is W 2,900 mm x L 2,950 mm, depending on configuration, and the height is approx. 2,820 / 2,960 mm depending on spindle type, so the spindle has to be chosen before the ceiling clearance is confirmed.
Full Specifications
| Parameter | Value |
|---|---|
| Machining Range | 800 mm x 635 mm x 400 mm (31.5 x 25.0 x 15.7 in) |
| Table Size | 796 mm x 596 mm (31.3 x 23.5 in) |
| Distance Spindle Nose to Table | 615 mm (24.2 in) |
| Max Workpiece Weight | 800 kg (1,764 lb) |
| Feed Rate | 0–60,000 mm/min (0–2,362 ipm) |
| Max Spindle Speed | 36,000 rpm (standard spindle; others on request) |
| Spindle Motor Power | 15 kW (20.1 hp) |
| Spindle Taper | HSK E50 |
| Max Tool Diameter (full magazine) | 20 mm (0.79 in) |
| Tool Capacity | 36 for HSK E50, optional 76 or more places (chain changer – can be loaded during machining) |
| Tool Measurement | Integrated measuring laser |
| Chip Disposal | With 2 screws into chip box behind the machine, additional chip conveyor optional |
| Machine Weight | ~8.4 t (~18,519 lb) |
| Required Space | W 2,900 mm x L 2,950 mm (depending on configuration) x H approx. 2,820 / 2,960 mm (depending on spindle type) |
Specifications sourced from roeders.de — verified 2026-10-05
Strengths & Limitations
Strengths
- 800 mm x 635 mm x 400 mm (31.5 x 25.0 x 15.7 in) machining range with an 800 kg (1,764 lb) workpiece limit
- 36,000 rpm standard spindle with 15 kW (20.1 hp) and HSK E50; spindles up to HSK A63 are offered
- Feeds up to 60,000 mm/min
- 36 tool places for HSK E50, optionally 76 or more in a chain changer that can be loaded during machining
- Laid out for EROWA UPC pallets, by the maker's description
Limitations
- Standard tools are limited to 20 mm in diameter
- Machine height depends on the spindle type: approx. 2,820 / 2,960 mm
- A chip conveyor is an option; the standard is a chip box behind the machine
- 400 mm in the third axis is short for deep mould halves
Best For
Frequently Asked Questions
01
The machining range is 800 mm x 635 mm x 400 mm (31.5 x 25.0 x 15.7 in), the table is 796 mm x 596 mm and the workpiece can weigh up to 800 kg (1,764 lb). The maximum distance from spindle nose to table is 615 mm (24.2 in).
02
36,000 rpm with 15 kW (20.1 hp) and an HSK E50 interface, for tools up to 20 mm in diameter. Other spindles are available on request, and the largest one Röders lists for this model has an HSK A63 interface.
03
They share a product page and most of the technical data. The RXP601DSH is the 5-axis machine with a machining range of 540 mm x 635 mm x 400 mm and a 200 kg workpiece limit; the RXP801 is the 3-axis machine with the full 800 mm range and 800 kg on the table.
04
Röders gives W 2,900 mm x L 2,950 mm, depending on configuration, and a height of approx. 2,820 / 2,960 mm depending on spindle type. The machine weighs about 8.4 t.
More from Röders
Other Vertical Machining Centers (VMC)
HNK HPF-30M (30x60)
Vision Wide BM-5030 / 5037
Feeler FDM-4232
