Johnford DMC-1200
Key Specifications
Spindle Taper
Tool Capacity
Table Size
Spindle Power
distance between columns
x axis travel
How much does the Johnford DMC-1200 cost?
Price estimate
We do not have a price for the Johnford DMC-1200 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
The Johnford DMC-1200 is a double column machining center with 1,200 x 900 x 762 mm (47.2 x 35.43 x 30 in) travels and a BT-40 / CAT-40 spindle. It is the middle size of the Small DMC group, on a table of 1,300 x 850 mm (51.2 x 33.5 in) that carries 3,800 kg (8,360 lb).
Where does it fit among Johnford's other 1,200 to 1,300 mm machines? The SV-48 has similar X travel on a C-frame, with 710 mm (28 in) of Y and a 1,500 kg (3,300 lb) table load. The VMC-1300 has 850 mm (33.5 in) of Y and carries 3,270 kg (7,194 lb). The DMC-1200 exceeds both in Y travel and table load, and it does so with the spindle supported between columns 1,060 mm (41.7 in) apart instead of hanging from one.
The working height is generous as well. Z travel is 762 mm (30 in) and the spindle nose stands 150~912 mm (5.9~35.9 in) from the table. Rapids are 24 / 24 / 12 m/min (945 / 945 / 472 ipm), and the cutting feed range is 1~12,000 mm/min.
Spindle choices are the same as on the DMC-900. The base drive is a 7.5 / 11 kW (10.1 / 14.8 hp) motor through a Hi Lo Gear at 8,000 rpm, with 10,000/12,000 rpm optional; the alternative is a 17 / 20 kW (22.8 / 26.8 hp) built-in spindle at 15,000, 18,000 or 20,000 rpm with HSK A63. An arm type changer with 24 tools is standard. At 12,000 kg (26,400 lb) and 4,735 x 3,250 x 3,780 mm (186 x 128 x 148.8 in), this is a substantial installation for a 40-taper machine.
Full Specifications
| Parameter | Value |
|---|---|
| Distance Between Columns | 1,060 mm (41.7 in) |
| Table Size | 1,300 x 850 mm (51.2 x 33.5 in) |
| X Axis Travel | 1,200 mm (47.2 in) |
| Y Axis Travel | 900 mm (35.43 in) |
| Z Axis Travel | 762 mm (30 in) |
| Distance Spindle Nose to Table | 150~912 mm (5.9~35.9 in) |
| Spindle Taper | BT-40 / CAT-40; HSK A63(Opt.) |
| Spindle Bearing Diameter | 70 mm (2.8 in) |
| Spindle Speed | 8,000, 10,000/12,000 rpm (Opt.); 15,000, 18,000, 20,000 rpm |
| Spindle Motor Power | 7.5 / 11 kW (10.1 / 14.8 hp) Hi Lo Gear; 17 / 20 kW (22.8 / 26.8 hp) Built-in |
| Rapid Traverse Xyz | 24 / 24 / 12 m/min (945 / 945 / 472 ipm) |
| Cutting Feed Rate | 1~12,000 mm/min (0.04~472 ipm) |
| Max Tool Diameter Adjacent Pockets | Ø75 mm (Ø3 in) |
| Tool Capacity | Arm type 24 / 32 / 40 (Opt.) |
| Max Tool Diameter (full magazine) | Ø100 mm (Ø4 in) |
| Max Tool Length | 320 mm (12.6 in) |
| Max Tool Weight | 10 kg (22 lb) |
| Tool Selection | Bi-direction random type, Shortest path |
| Max Table Load | 3,800 kg (8,360 lb) |
| Machine Dimensions | 4,735 x 3,250 x 3,780 mm (186 x 128 x 148.8 in) |
| Machine Weight | 12,000 kg (26,400 lb) |
Specifications sourced from johnford.com.tw — verified 2026-10-04
Strengths & Limitations
Strengths
- 900 mm (35.43 in) of Y travel on a bridge frame, more than the SV-48 or VMC-1300 offer
- 3,800 kg (8,360 lb) table load
- 762 mm (30 in) of Z travel for tall workpieces and fixtures
- Choice of geared 8,000 rpm drive or a built-in HSK A63 spindle up to 20,000 rpm
- Standard 24-tool arm type ATC and three chip conveyors
Limitations
- Distance between columns of 1,060 mm (41.7 in) fixes the widest part that will pass
- Base motor is 7.5 / 11 kW (10.1 / 14.8 hp)
- 12,000 kg (26,400 lb) and 3,780 mm (148.8 in) high
- Z rapid is 12 m/min (472 ipm)
Best For
Frequently Asked Questions
01
X 1,200 mm (47.2 in), Y 900 mm (35.43 in), Z 762 mm (30 in). The table is 1,300 x 850 mm (51.2 x 33.5 in) and the distance between columns is 1,060 mm (41.7 in).
02
3,800 kg (8,360 lb). In the same group the DMC-900 is rated 3,000 kg (6,600 lb) and the DMC-1500 4,600 kg (10,120 lb).
03
The motor row lists 7.5 / 11 kW (10.1 / 14.8 hp) with a Hi Lo Gear, and a 17 / 20 kW (22.8 / 26.8 hp) built-in spindle. Taper is BT-40 / CAT-40 with HSK A63 optional, and the spindle bearing diameter is 70 mm (2.8 in).
04
An external coolant supply system at 2 bar with spindle nozzles, spindle air blast, and two screw type plus one chain type chip conveyor with trolley are standard. High pressure coolant through the spindle or tool tip at 20 bar is optional.
More from Johnford
Other Vertical Machining Centers (VMC)
FANUC Robodrill α-D21LiB Plus
Hartford MCW-8650
Hurco VMX64i
