Johnford DMC-1500
Key Specifications
Spindle Taper
Tool Capacity
Table Size
Spindle Power
distance between columns
x axis travel
How much does the Johnford DMC-1500 cost?
Price estimate
We do not have a price for the Johnford DMC-1500 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
The Johnford DMC-1500 is the longest machine built on Johnford's small double column frame, with 1,500 mm (59.1 in) of X travel over a 1,600 x 850 mm (63 x 33.5 in) table. Columns are 1,060 mm (41.7 in) apart, Y travel is 900 mm (35.43 in), Z travel is 762 mm (30 in), and the spindle is BT-40 / CAT-40.
Table load climbs with each size in this group, and here it reaches 4,600 kg (10,120 lb). That equals the rating of the VMC-1600, Johnford's C-frame machine of similar length, but the two machines differ in what they do well. The VMC-1600 has 850 mm (33.5 in) of Y travel on a single column. The DMC-1500 gives 900 mm of Y on a bridge, which supports the spindle on both sides across a wide part. The DMC-1500 weighs 15,000 kg (33,000 lb).
Buyers moving past this size should note where the series changes. The next model, the DMC-1600, belongs to a larger frame with 1,300 mm (51.2 in) between columns and a 6,000 kg (13,200 lb) table load, and its rapids are slower. The DMC-1500 keeps the small frame's 24 / 24 / 12 m/min (945 / 945 / 472 ipm).
The base spindle drive is 7.5 / 11 kW (10.1 / 14.8 hp) with a Hi Lo Gear at 8,000 rpm. For long aluminium or mold parts the 17 / 20 kW (22.8 / 26.8 hp) built-in spindle at 15,000, 18,000 or 20,000 rpm is likely the better match, with the optional linear scales. The machine measures 4,980 x 3,250 x 3,780 mm (196 x 128 x 148.8 in).
Full Specifications
| Parameter | Value |
|---|---|
| Distance Between Columns | 1,060 mm (41.7 in) |
| Table Size | 1,600 x 850 mm (63 x 33.5 in) |
| X Axis Travel | 1,500 mm (59.1 in) |
| Y Axis Travel | 900 mm (35.43 in) |
| Z Axis Travel | 762 mm (30 in) |
| Distance Spindle Nose to Table | 150~912 mm (5.9~35.9 in) |
| Spindle Taper | BT-40 / CAT-40; HSK A63(Opt.) |
| Spindle Bearing Diameter | 70 mm (2.8 in) |
| Spindle Speed | 8,000, 10,000/12,000 rpm (Opt.); 15,000, 18,000, 20,000 rpm |
| Spindle Motor Power | 7.5 / 11 kW (10.1 / 14.8 hp) Hi Lo Gear; 17 / 20 kW (22.8 / 26.8 hp) Built-in |
| Rapid Traverse Xyz | 24 / 24 / 12 m/min (945 / 945 / 472 ipm) |
| Cutting Feed Rate | 1~12,000 mm/min (0.04~472 ipm) |
| Max Tool Diameter Adjacent Pockets | Ø75 mm (Ø3 in) |
| Tool Capacity | Arm type 24 / 32 / 40 (Opt.) |
| Max Tool Diameter (full magazine) | Ø100 mm (Ø4 in) |
| Max Tool Length | 320 mm (12.6 in) |
| Max Tool Weight | 10 kg (22 lb) |
| Tool Selection | Bi-direction random type, Shortest path |
| Max Table Load | 4,600 kg (10,120 lb) |
| Machine Dimensions | 4,980 x 3,250 x 3,780 mm (196 x 128 x 148.8 in) |
| Machine Weight | 15,000 kg (33,000 lb) |
Specifications sourced from johnford.com.tw — verified 2026-10-04
Strengths & Limitations
Strengths
- 1,500 mm (59.1 in) of X travel on the small DMC frame with 24 m/min (945 ipm) X-Y rapids
- 4,600 kg (10,120 lb) table load
- 900 mm (35.43 in) Y travel and 762 mm (30 in) Z travel
- Built-in 17 / 20 kW (22.8 / 26.8 hp) spindle to 20,000 rpm available
- Full enclosure and a 24-tool arm type ATC are standard accessories
Limitations
- Table is 850 mm (33.5 in) deep against 1,600 mm of length
- Column spacing of 1,060 mm (41.7 in) is unchanged from the DMC-900
- Geared base drive is 7.5 / 11 kW (10.1 / 14.8 hp)
- 15,000 kg (33,000 lb) machine weight needs a suitable floor
Best For
Frequently Asked Questions
01
Travels are 1,500 x 900 x 762 mm (59.1 x 35.43 x 30 in) and the table is 1,600 x 850 mm (63 x 33.5 in). The machine measures 4,980 x 3,250 x 3,780 mm (196 x 128 x 148.8 in) and weighs 15,000 kg (33,000 lb).
02
03
The DMC-1600 is on a larger frame: 1,300 mm (51.2 in) between columns, 1,300 mm (51.2 in) of Y travel, a 6,000 kg (13,200 lb) table load and a weight of 20,400 kg (45,000 lb), with rapids of 15 / 15 / 12 m/min. The DMC-1500 has 900 mm (35.43 in) of Y and 24 / 24 / 12 m/min rapids.
04
An arm type changer with 24 tools as standard and 32 or 40 tools as options in the table; the accessory list extends that to 60 tools or above. Tools can be Ø100 mm (Ø4 in), or Ø75 mm (Ø3 in) with adjacent pockets filled, 320 mm (12.6 in) long and 10 kg (22 lb).
More from Johnford
Other Vertical Machining Centers (VMC)
FANUC Robodrill α-D21LiBADV Plus Y500
Ganesh GEN MILL 3120
Hurco VMX84i
Vision Wide VB-3016
You Ji VTM1100
