Feeler SVW-3217
Key Specifications
Max Spindle
Spindle Taper
Tool Capacity
x axis travel
z axis travel
table length
How much does the Feeler SVW-3217 cost?
Price estimate
We do not have a price for the Feeler SVW-3217 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
The Feeler SVW-3217 is the three-metre machine of the 1,400 mm width group: 3,200 mm (126.0 in) of X travel, a 3,000 × 1,400 mm (118.1 × 55.1 in) table and a 10 ton load rating.
This is the size at which the X axis slows. X rapid is 12 m/min (472 ipm), while Y and Z remain at 15 m/min (591 ipm). On a heavy-cutting machine the rapid rate has little effect on cycle time, since most of the time is spent in the cut, but it is a real difference on work with many small features spread along the table.
Ten ton on a table of this area is a solid figure. It is well above the 6 ton that the SVW-3113 carries on a table of the same length, so the wider machine is the one for thick steel plate, large mould bases and cast machine members. Feeler describes the table as supported over its full travel, eliminating overhang and aiding vibration absorption during machining.
The geared spindle runs to 6,000 rpm on a BT/DIN/CAT 50 taper. Its two-speed gearbox is there for torque at low speed, which large face mills and boring tools need. Brackets in the table offer 8,000-15,000 rpm with #40 instead. Z travel is 800 mm (31.5 in) with 1,000 mm (39.4 in) bracketed, and the magazine is listed as 24 (32/40/60) tools.
Full Specifications
| Parameter | Value |
|---|---|
| X Axis Travel | 3,200 mm (126.0 in) |
| Z Axis Travel | 800 (1,000) mm (31.5 (39.4) in) |
| Table Length | 3,000 mm (118.1 in) |
| Table Width | 1,400 mm (55.1 in) |
| Max Table Load | 10 ton |
| Max Spindle Speed | 6,000 (8,000-15,000) rpm |
| Spindle Taper | BT/DIN/CAT 50 (#40) |
| Rapid Traverse X | 12 m/min (472 ipm) |
| Rapid Traverse Y | 15 m/min (591 ipm) |
| Rapid Traverse Z | 15 m/min (591 ipm) |
| Tool Capacity | 24 (32/40/60) |
Specifications sourced from feeler.com — verified 2026-10-04
Strengths & Limitations
Strengths
- 10 ton load on a 3,000 × 1,400 mm (118.1 × 55.1 in) table
- 3,200 mm (126.0 in) of X travel
- Two-speed geared spindle for large face mills and boring tools
- Magazine choices of 24, 32, 40 or 60 tools
Limitations
- X rapid is 12 m/min (472 ipm)
- Spindle speed of 6,000 rpm unless the bracketed faster spindle is ordered
- Y travel and spindle power are not shown on this page
Best For
Frequently Asked Questions
01
10 ton. The table is 3,000 mm long and 1,400 mm wide (118.1 × 55.1 in). The narrower SVW-3113, with the same table length, is rated at 6 ton.
02
X is listed at 12 m/min (472 ipm) and both Y and Z at 15 m/min (591 ipm). The shorter SVW-2817 keeps 15 m/min on X as well.
03
Yes. Feeler states that the spindle uses a fully geared internal transmission with a two-speed gearbox, offering high-torque output at low speed for heavy cutting and increased precision at high speed. The listed top speed is 6,000 rpm.
More from Feeler
Other Vertical Machining Centers (VMC)
Sharp KMA-1-CNC
DN Solutions VCF 850 LSR II
Akira Seiki V8XP
