Feeler SVW-2817
Key Specifications
Max Spindle
Spindle Taper
Tool Capacity
x axis travel
z axis travel
table length
How much does the Feeler SVW-2817 cost?
Price estimate
We do not have a price for the Feeler SVW-2817 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
Feeler's SVW-2817 has a table 2,600 mm (102.4 in) long and 1,400 mm (55.1 in) wide, with 2,800 mm (110.2 in) of X travel. That length does not exist on the narrowest SVW table, where sizes jump from two metres to three. Here it fills the gap between the SVW-2217 and the SVW-3217.
In-between sizes matter on gantry machines because floor space and foundation grow with X. A shop whose longest part is two and a half metres does not have to give up floor area for a three-metre table. The load rating is 9 ton, between the 8 ton of the SVW-2217 and the 10 ton of the SVW-3217.
It is also the longest model in its width that keeps the X rapid at 15 m/min (591 ipm); the SVW-3217 is listed at 12 m/min. Y and Z are 15 m/min as well.
The series is built for heavy cutting, in Feeler's words, around a box-type structure with reinforced ribs. Each table goes through multi-step precision milling before assembly, a detail the maker gives to explain alignment. The spindle is geared, 6,000 rpm on a BT/DIN/CAT 50 taper, with 8,000-15,000 rpm and #40 as the bracketed alternative. Z travel is 800 mm (31.5 in), or 1,000 mm (39.4 in) in brackets, and the magazine holds 24 tools with 32, 40 or 60 optional.
Full Specifications
| Parameter | Value |
|---|---|
| X Axis Travel | 2,800 mm (110.2 in) |
| Z Axis Travel | 800 (1,000) mm (31.5 (39.4) in) |
| Table Length | 2,600 mm (102.4 in) |
| Table Width | 1,400 mm (55.1 in) |
| Max Table Load | 9 ton |
| Max Spindle Speed | 6,000 (8,000-15,000) rpm |
| Spindle Taper | BT/DIN/CAT 50 (#40) |
| Rapid Traverse X | 15 m/min (591 ipm) |
| Rapid Traverse Y | 15 m/min (591 ipm) |
| Rapid Traverse Z | 15 m/min (591 ipm) |
| Tool Capacity | 24 (32/40/60) |
Specifications sourced from feeler.com — verified 2026-10-04
Strengths & Limitations
Strengths
- 2,600 × 1,400 mm (102.4 × 55.1 in) table, a length between the two- and three-metre sizes
- 9 ton table load, above the 8 ton of the SVW-2217
- X rapid of 15 m/min (591 ipm), where the SVW-3217 has 12 m/min
- Up to 60 tools in the largest magazine option
Limitations
- All rapids are 15 m/min (591 ipm), well under the 24 m/min of the SVW-2113
- Standard Z travel is 800 mm (31.5 in); 1,000 mm is the bracketed alternative
- No Y travel, power or weight data on this page
Best For
Frequently Asked Questions
01
In the 1,400 mm table width, between the SVW-2217 (2,000 mm table, 8 ton) and the SVW-3217 (3,000 mm table, 10 ton). Its own table is 2,600 mm long and rated for 9 ton.
02
15 m/min (591 ipm) on X, Y and Z alike. That is the top X rate in this width class: the two longer models, including the SVW-3217, are listed at 12 m/min (472 ipm) on X.
03
Two things. The table is supported over its full travel, which eliminates overhang, and each table undergoes multi-step precision milling prior to assembly to minimize alignment errors. The table itself is 2,600 × 1,400 mm with a 9 ton rating.
04
The listed spindle is 6,000 rpm on BT/DIN/CAT 50 with a two-speed geared drive, the one matched to heavy cutting. The bracketed 8,000-15,000 rpm range with #40 suits lighter, faster work. Feeler's table does not give power or torque for either.
More from Feeler
Other Vertical Machining Centers (VMC)
Colchester Storm VL-550
Sharp SVL-4528SX-F
DN Solutions VCF 5500 L
