Feeler SVW-3113
Key Specifications
Max Spindle
Spindle Taper
Tool Capacity
x axis travel
z axis travel
table length
How much does the Feeler SVW-3113 cost?
Price estimate
We do not have a price for the Feeler SVW-3113 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
Three metres of table at full speed is the case for the Feeler SVW-3113. X travel is 3,100 mm (122.0 in) over a 3,000 × 1,100 mm (118.1 × 43.3 in) table, and X and Y still rapid at 24 m/min (945 ipm), the same as on the shorter SVW-2113. One size longer, the SVW-4113 drops to 20 m/min on X.
Table load is 6 ton. Spread over a table this long and only 1,100 mm wide, that favours long parts of moderate section: machine beds, side frames, press brake beams, welded booms. Feeler notes that the table is supported over its full travel, which removes overhang, so a long workpiece is carried the same way at both ends of the stroke.
Cutting is done by a geared spindle. The maker describes a fully geared internal transmission with a two-speed gearbox, listed at 6,000 rpm on a BT/DIN/CAT 50 taper. A faster 8,000-15,000 rpm range and a #40 taper appear in brackets. Which to take depends on the material: the geared 50-taper spindle for steel and iron, the faster one for aluminium plate.
Z travel is 800 mm (31.5 in) as listed, or 1,000 mm (39.4 in) in brackets, with a Z rapid of 20 m/min (787 ipm). The tool magazine holds 24, with 32 and 40 as alternatives.
Full Specifications
| Parameter | Value |
|---|---|
| X Axis Travel | 3,100 mm (122.0 in) |
| Z Axis Travel | 800 (1,000) mm (31.5 (39.4) in) |
| Table Length | 3,000 mm (118.1 in) |
| Table Width | 1,100 mm (43.3 in) |
| Max Table Load | 6 ton |
| Max Spindle Speed | 6,000 (8,000-15,000) rpm |
| Spindle Taper | BT/DIN/CAT 50 (#40) |
| Rapid Traverse X | 24 m/min (945 ipm) |
| Rapid Traverse Y | 24 m/min (945 ipm) |
| Rapid Traverse Z | 20 m/min (787 ipm) |
| Tool Capacity | 24 (32/40) |
Specifications sourced from feeler.com — verified 2026-10-04
Strengths & Limitations
Strengths
- 3,000 mm (118.1 in) table with 24 m/min (945 ipm) rapids on X and Y
- 6 ton table load, up from 4 ton on the SVW-2113
- Two-speed geared spindle on a 50 taper
- Optional automatic attachment change for multi-face work
Limitations
- Table is only 1,100 mm (43.3 in) wide
- Largest magazine listed is 40 tools
- Y travel, power and torque are not listed on this page
Best For
Frequently Asked Questions
01
X travel is 3,100 mm (122.0 in) and Z travel 800 mm (31.5 in), with 1,000 mm (39.4 in) in brackets. The table measures 3,000 × 1,100 mm (118.1 × 43.3 in). The Y travel figure is not listed on this page.
02
6 ton. The shorter SVW-2113 is rated at 4 ton and the longer SVW-4113 at 8 ton, so within this width the rating rises with table length.
03
Feeler titles the SVW a gantry multi-face machining center and offers an optional automatic attachment change system. The maker says it reduces manual changeover time. The attachment heads themselves are not listed in the series table, so ask which are available.
04
24 in the listed magazine. The bracketed alternatives are 32 and 40. Wider SVW models add a larger option, but on the SVW-3113 the choices end at 40 tools.
More from Feeler
Other Vertical Machining Centers (VMC)
Colchester Storm VL-850
DN Solutions VCF 850 L II
Makino PS65
Akira Seiki V6XP
DATRON MLCube Pro
