Baykal APHS 4112x300
Image: baykal.com.tr, Baykal
Key Specifications
bending force
bending length
distance between frames
throat gap
stroke
daylight opening
How much does the Baykal APHS 4112x300 cost?
Price estimate
We do not have a price for the Baykal APHS 4112x300 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
The Baykal APHS 4112x300 is the largest four-metre machine in the APHS data sheet: 3,000 kN over 4,100 mm (161.4 in) on the heavy frame, at about 18.5 Ton. It matches the two limits in Baykal's summary of the series, up to 4100 mm and up to 300 tons.
Heavy frame means deeper and taller. The throat gap is 500 mm (19.7 in) and the stroke 320 mm (12.6 in), with a daylight opening of 635 mm (25 in). The table is 280 mm (11 in) wide on a bed 980 mm (38.6 in) high. Curiously, the three-metre machine of the same force is more generous in two of those rows: the APHS 3116x300 has 660 mm (26 in) of daylight and a 380 mm (15 in) table.
A 22 kW (29.5 hp) motor and a 280 L tank drive it. Approach is 120 mm/s, working speed 8 mm/s and return 90 mm/s.
Long and deep is the work this machine exists for. Lighting poles, long box beams, deep trays and tipper body sides need the stroke to get the part out and the throat to reach past the frames, which stand 3,550 mm (139.8 in) apart. Side frame width is 1,820 mm (71.7 in), so leave room behind the machine as well as beside it.
Full Specifications
| Parameter | Value |
|---|---|
| Bending Force | 3,000 kN |
| Bending Length | 4,100 mm (161.4 in) |
| Distance Between Frames | 3,550 mm (139.8 in) |
| Throat Gap | 500 mm (19.7 in) |
| Stroke | 320 mm (12.6 in) |
| Daylight Opening | 635 mm (25 in) |
| Table Width | 280 mm (11 in) |
| Bed Height | 980 mm (38.6 in) |
| Side Frame Width | 1,820 mm (71.7 in) |
| Approach Speed | 120 mm/s |
| Working Speed | 8 mm/s |
| Return Speed | 90 mm/s |
| Motor Power | 22 kW (29.5 hp) |
| Oil Tank Volume | 280 L |
| Machine Weight | 18.5 Ton (approx.) |
Specifications sourced from baykal.com.tr — verified 2026-10-05
Strengths & Limitations
Strengths
- 3,000 kN over 4,100 mm (161.4 in)
- 500 mm (19.7 in) throat gap with a 320 mm (12.6 in) stroke
- 635 mm (25 in) daylight opening
- 280 mm (11 in) table for wide dies
Limitations
- About 18.5 Ton, against roughly 14 Ton for the APHS 4110x240
- Bends at 8 mm/s and returns at 90 mm/s
- Daylight and table width are below the APHS 3116x300
- Bed height of 980 mm (38.6 in)
Best For
Frequently Asked Questions
01
Yes. The APHS data sheet ends at this size for the 4,100 mm (161.4 in) bed, and Baykal's summary of the series reads up to 4100 mm and up to 300 tons. A stronger four-metre machine appears in the APHS PRO table as the APHS PRO 4116x440, with 4,400 kN.
02
Both have 3,000 kN, a 22 kW (29.5 hp) motor, a 280 L tank, a 500 mm (19.7 in) throat and a 320 mm (12.6 in) stroke. The APHS 3116x300 is shorter at 3,100 mm (122 in), weighs about 15 Ton and has a wider 380 mm (15 in) table.
03
120 mm/s on approach, 8 mm/s under load and 90 mm/s on return. With 320 mm (12.6 in) of stroke available, set the mute point and opening no higher than the part needs or the cycle becomes long.
04
The bed is 980 mm (38.6 in) high, against 880 mm (34.6 in) on the APHS 4110x240. Add the die height to find the bend line; shorter operators may need a platform.
