Ermak Power-Bend Falcon 2600-100
Image: ermaksan.com.tr, Ermak
Key Specifications
bending length
bending power
distance between columns
y rapid speed
y working speed
y return speed
How much does the Ermak Power-Bend Falcon 2600-100 cost?
Price estimate
We do not have a price for the Ermak Power-Bend Falcon 2600-100 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
With 100 Ton (110 US tons) on a 2,600 mm (102.4 in) bed, the Ermak Power-Bend Falcon 2600-100 is the middle of three Falcons at this length and the first with the long backgauge.
X-axis travel is 800 mm here. On the Power-Bend Falcon 2600-60 it is 500 mm, so the step to 100 Ton also buys reach for deep flanges, not just force. The R axis moves 250 mm, and the axis speeds are 500 mm/s for X and 350 mm/s for R.
The hydraulic unit is unchanged from the lighter machine: a 7.5 kW motor and 150 L of oil. More force from equal motor power shows up in the working speed, which Ermak gives as 9.5 mm/s. Approach is 200 mm/s and return 155 mm/s.
Opening figures are 275 mm of stroke, 530 mm of daylight and 410 mm of throat depth. The Power-Bend Falcon 2600-135 has 550 mm of daylight and an 11 kW motor, if more force or a little more opening is wanted on this bed.
Installation data: 4,350 mm long, 2,500 mm wide, 2,550 mm high, 6,273 kg. The width is the largest of the three 2,600 mm models, so check the rear clearance for the backgauge. Table height is 900 mm and the table itself is 90 mm wide. Crowning is motorized, and the columns are 2,200 mm apart.
Full Specifications
| Parameter | Value |
|---|---|
| Bending Length | 2,600 mm (102.4 in) |
| Bending Power | 100 Ton (110 US tons) |
| Distance Between Columns | 2,200 mm (86.6 in) |
| Y Rapid Speed | 200 mm/s (7.87 in/s) |
| Y Working Speed | 9.5 mm/s (0.37 in/s) |
| Y Return Speed | 155 mm/s (6.1 in/s) |
| Crowning | Motorized |
| X Axis Travel | 800 mm (31.5 in) |
| X Axis Speed | 500 mm/s (19.69 in/s) |
| R Axis Travel | 250 mm (9.8 in) |
| R Axis Speed | 350 mm/s (13.78 in/s) |
| Backgauge Finger Blocks | 2 |
| Sheet Supports | 2 |
| Oil Capacity | 150 L (39.6 US gal) |
| Motor Power | 7.5 kW (10.1 hp) |
| Stroke | 275 mm (10.8 in) |
| Daylight | 530 mm (20.9 in) |
| Throat Depth | 410 mm (16.1 in) |
| Table Height | 900 mm (35.4 in) |
| Table Width | 90 mm (3.5 in) |
| Length | 4,350 mm (171.3 in) |
| Height | 2,550 mm (100.4 in) |
| Width | 2,500 mm (98.4 in) |
| Machine Weight | 6,273 kg (13,829 lb) |
Specifications sourced from ermaksan.com.tr — verified 2026-10-05
Strengths & Limitations
Strengths
- 100 Ton with a 200 mm/s rapid approach
- 800 mm of backgauge X travel
- 7.5 kW motor: modest power demand for a 100 Ton machine
- Motorized crowning and 2,200 mm between the columns
Limitations
- Working speed is 9.5 mm/s, slightly under the 10 mm/s of most sizes
- 2,500 mm overall width needs space behind the machine
- 530 mm daylight, a little less than the heavier Falcons offer
- Standard backgauge has X and R only
Best For
Frequently Asked Questions
01
The Power-Bend Falcon 2600-100 has 800 mm of X travel instead of the 500 mm of the Power-Bend Falcon 2600-60, a 9.5 mm/s working speed and a 155 mm/s return. Motor power stays at 7.5 kW and oil capacity at 150 L.
02
6,273 kg. The machine measures 4,350 mm in length, 2,500 mm in width and 2,550 mm in height, which is worth checking against door openings and crane capacity before delivery.
03
Hardly. The difference from 10 mm/s is small and affects only the bending part of the stroke. The 200 mm/s approach and 155 mm/s return decide most of the cycle time.
04
By linear rulers on the top beam. Ermak states a synchronisation tolerance of 0.01 for the Y1 and Y2 axes, both of which are CNC axes as standard.
