Baykal APHS 4106x160
Image: baykal.com.tr, Baykal
Key Specifications
bending force
bending length
distance between frames
throat gap
stroke
daylight opening
How much does the Baykal APHS 4106x160 cost?
Price estimate
We do not have a price for the Baykal APHS 4106x160 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
Four metres of bed start here. The Baykal APHS 4106x160 has a bending length of 4,100 mm (161.4 in) with 1,600 kN, the lowest force Baykal lists at this length, and 3,550 mm (139.8 in) between the side frames.
It has the quickest approach in the entire APHS table, 170 mm/s. Return is a different matter at 120 mm/s, since the same pump has a longer, heavier ram to lift. Working speed is 10 mm/s.
For whom is 1,600 kN on four metres the right amount? Mostly for shops bending long thin parts, such as roofing and facade profiles, lighting columns in light gauge, truck body panels, long trays. The force is the same as on the APHS 3108x160, only spread further, so full-length bends in thicker material belong on the APHS 4108x200 or above.
Motor and tank are carried over from the three-metre machine of equal force: 15 kW (20.1 hp) and 210 L. Weight is about 12 Ton. Stroke is 260 mm (10.2 in), daylight opening 530 mm (20.9 in), throat gap 410 mm (16.1 in) and table width 60 mm (2.4 in).
Baykal's APHS summary gives up to 4100 mm as the longest bed of the series.
Full Specifications
| Parameter | Value |
|---|---|
| Bending Force | 1,600 kN |
| Bending Length | 4,100 mm (161.4 in) |
| Distance Between Frames | 3,550 mm (139.8 in) |
| Throat Gap | 410 mm (16.1 in) |
| Stroke | 260 mm (10.2 in) |
| Daylight Opening | 530 mm (20.9 in) |
| Table Width | 60 mm (2.4 in) |
| Bed Height | 880 mm (34.6 in) |
| Side Frame Width | 1,600 mm (63 in) |
| Approach Speed | 170 mm/s |
| Working Speed | 10 mm/s |
| Return Speed | 120 mm/s |
| Motor Power | 15 kW (20.1 hp) |
| Oil Tank Volume | 210 L |
| Machine Weight | 12 Ton (approx.) |
Specifications sourced from baykal.com.tr — verified 2026-10-05
Strengths & Limitations
Strengths
- 170 mm/s approach, the fastest figure in the APHS table
- 4,100 mm (161.4 in) bending length at about 12 Ton
- 3,550 mm (139.8 in) between the side frames
- 15 kW (20.1 hp) motor and 210 L tank, as on the APHS 3108x160
Limitations
- 1,600 kN is thin-sheet force when spread over four metres
- Return speed is 120 mm/s, against 170 mm/s on approach
- 60 mm (2.4 in) table on a long bed
- No crowning system is described in the APHS data
Best For
Frequently Asked Questions
01
Bending length is 4,100 mm (161.4 in). Between the frames there is 3,550 mm (139.8 in); a longer part is bent in front of the frames within the 410 mm (16.1 in) throat gap.
02
On approach, yes: 170 mm/s against 160 mm/s for the APHS 3108x160. On return the APHS 3108x160 is quicker, 130 mm/s against 120 mm/s here. Working speed is 10 mm/s on both.
03
Neither Baykal's APHS page nor the technical data sheet mentions a crowning system for this series. On a 4,100 mm (161.4 in) bed that is worth asking about before ordering, because deflection grows with length.
04
About 12 Ton, a 15 kW (20.1 hp) motor and a 210 L oil tank. Bed height is 880 mm (34.6 in) and side frame width 1,600 mm (63 in).
