Baykal APHS 4108x200
Image: baykal.com.tr, Baykal
Key Specifications
bending force
bending length
distance between frames
throat gap
stroke
daylight opening
How much does the Baykal APHS 4108x200 cost?
Price estimate
We do not have a price for the Baykal APHS 4108x200 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
The Baykal APHS 4108x200 gives 2,000 kN on a 4,100 mm (161.4 in) bed and weighs approximately 12.5 Ton. On paper it differs from the APHS 4106x160 by a single step in force, yet three other rows move with it.
First, the motor: 18.5 kW (24.8 hp). Second, the table, which widens to 90 mm (3.5 in). Third, the speeds. Approach is 160 mm/s and return 110 mm/s; the APHS 4106x160 is listed at 170 mm/s and 120 mm/s. Each force step on the four-metre frame costs 10 mm/s in both directions, a pattern that continues to the APHS 4110x240.
Half a tonne separates the two machines, so floor loading is not a reason to choose the weaker one. Oil volume is 210 L either way.
The frame dimensions are those of every light four-metre APHS. Distance between the frames is 3,550 mm (139.8 in), throat gap 410 mm (16.1 in), stroke 260 mm (10.2 in), daylight opening 530 mm (20.9 in) and bed height 880 mm (34.6 in). Working speed is 10 mm/s.
Use it where long parts are no longer thin: door frames in heavier gauge, trailer cross-members, tank shells in sections.
Full Specifications
| Parameter | Value |
|---|---|
| Bending Force | 2,000 kN |
| Bending Length | 4,100 mm (161.4 in) |
| Distance Between Frames | 3,550 mm (139.8 in) |
| Throat Gap | 410 mm (16.1 in) |
| Stroke | 260 mm (10.2 in) |
| Daylight Opening | 530 mm (20.9 in) |
| Table Width | 90 mm (3.5 in) |
| Bed Height | 880 mm (34.6 in) |
| Side Frame Width | 1,600 mm (63 in) |
| Approach Speed | 160 mm/s |
| Working Speed | 10 mm/s |
| Return Speed | 110 mm/s |
| Motor Power | 18.5 kW (24.8 hp) |
| Oil Tank Volume | 210 L |
| Machine Weight | 12.5 Ton (approx.) |
Specifications sourced from baykal.com.tr — verified 2026-10-05
Strengths & Limitations
Strengths
- 2,000 kN across 4,100 mm (161.4 in)
- Weighs only about 12.5 Ton, close to the APHS 4106x160
- 90 mm (3.5 in) table width
- 160 mm/s approach with a 10 mm/s working speed
Limitations
- Return speed of 110 mm/s slows multi-bend parts
- 18.5 kW (24.8 hp) motor needs more supply than the APHS 4106x160
- Throat gap of 410 mm (16.1 in) and stroke of 260 mm (10.2 in)
Best For
Frequently Asked Questions
01
The APHS 4106x160 has 1,600 kN, a 15 kW (20.1 hp) motor and a 60 mm (2.4 in) table, and it is faster at 170 mm/s approach and 120 mm/s return. This model has 2,000 kN, an 18.5 kW (24.8 hp) motor and a 90 mm (3.5 in) table.
02
Approximately 12.5 Ton according to the data sheet. The side frame width is 1,600 mm (63 in). Overall length is not printed, so allow for more than the 4,100 mm (161.4 in) bending length when planning the bay.
03
Yes. The APHS 3110x200 has 2,000 kN over 3,100 mm (122 in), with a 19 kW (25.5 hp) motor and a return speed of 130 mm/s, and weighs about 10 Ton.
04
Daylight opening is 530 mm (20.9 in) and stroke 260 mm (10.2 in). The table is 90 mm (3.5 in) wide at a bed height of 880 mm (34.6 in).
