LVD Easy-Form 135/40
Image: lvdgroup.com, LVD
Key Specifications
pressing force
hydraulic pressure
bending length
width between columns
ram stroke
open height
How much does the LVD Easy-Form 135/40 cost?
Price estimate
We do not have a price for the LVD Easy-Form 135/40 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
The LVD Easy-Form 135/40 delivers 1,350 kN at 290 bar over a 4,000 mm (157.5 in) working length and weighs 11,000 kg (24,250 lb). LVD lists the Easy-Form 110/40, with 1,100 kN at 245 bar, at exactly the same weight.
Since the motor (22 kW), the oil tank (250 L) and every speed in the table are also shared, the question for a buyer is short. Is there any reason not to take the extra force? On the published figures, none. The Easy-Form 110/40 does not come out lighter, smaller or faster.
With 1,350 kN on four metres the machine covers general thin-to-medium sheet work at full length and heavier gauges on shorter parts. The table is rated at 2,000 kN/m, so concentrating the force on a short tool is within its rating.
Approach is 180 mm/s, working speed 22 mm/s, return 200 mm/s. The frame leaves 3,150 mm (124.0 in) between the uprights and a 400 mm (15.7 in) gap. Stroke is 200 mm (7.9 in); open height is 400 mm, extendable in LVD's 100 mm steps.
The next force step at this length is a different machine: the Easy-Form 170/40 has 1,700 kN, a 37 kW motor, 425 L of oil and 13,500 kg.
Full Specifications
| Parameter | Value |
|---|---|
| Pressing Force | 1,350 kN |
| Hydraulic Pressure | 290 bar |
| Bending Length | 4,000 mm (157.5 in) |
| Width Between Columns | 3,150 mm (124.0 in) |
| Ram Stroke | 200 mm (7.9 in) |
| Open Height | 400 mm (15.7 in) |
| Throat Depth | 400 mm (15.7 in) |
| Table Width | 120 mm (4.7 in) |
| Max Table Load | 2,000 kN/m |
| Working Height | 970 mm (38.2 in) |
| Approach Speed | 180 mm/s |
| Bending Speed | 22 mm/s |
| Return Speed | 200 mm/s |
| Motor Power | 22 kW |
| Machine Weight | 11,000 kg (24,250 lb) |
| Oil Tank Capacity | 250 L |
Specifications sourced from lvdgroup.com — verified 2026-10-05
Strengths & Limitations
Strengths
- 1,350 kN over 4,000 mm (157.5 in) at 11,000 kg (24,250 lb)
- Same motor, tank and speeds as the Easy-Form 110/40, with more force
- Table rated at 2,000 kN/m for concentrated loads
- Easy-Form Laser adaptive bending is part of the standard machine
- 180 mm/s approach and 200 mm/s return
Limitations
- 3,150 mm (124.0 in) between uprights; the Easy-Form 135/42 has 3,820 mm
- 200 mm (7.9 in) stroke in the listed configuration
- Jump to the Easy-Form 170/40 means a 37 kW motor and 13,500 kg
- Hemming table and hydraulic clamping are options
Best For
Frequently Asked Questions
01
Not by LVD's table. The Easy-Form 110/40 is listed at 11,000 kg with a 22 kW motor and a 250 L tank, exactly as this model, and differs only in force and pressure: 1,100 kN at 245 bar there, 1,350 kN at 290 bar here.
02
At the same length, the Easy-Form 170/40: 1,700 kN, a 37 kW motor, a 425 L tank and 13,500 kg. Its speeds are the same 180, 22 and 200 mm/s.
03
By linear encoders. LVD connects them to the machine in a way that keeps frame deformation during bending from influencing the positioning accuracy of the ram.
04
A hemming table is offered as an option. LVD recommends it for shops that frequently make soft or rounded safety edges or hem parts for strength.
