AWEA MVP-6032
Image: awea.com, AWEA
Key Specifications
Max Spindle
Spindle Taper
Tool Capacity
Table Size
Spindle Power
x axis travel
How much does the AWEA MVP-6032 cost?
Price estimate
We do not have a price for the AWEA MVP-6032 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
At 6,000 mm (236.2 in) of X travel, the AWEA MVP-6032 is the first size in the MVP five-face range to get two things: the 20,000 kg (44,092 lb) table rating and a vibration damping mechanism on the X-axis ball screw. AWEA applies that mechanism to models of 6 m travel and above only. A screw this long is prone to whip and vibration, and the maker's stated aim is to keep cutting accuracy over the full travel.
Y travel is 3,200 mm (126.0 in), the table measures 6,020 x 2,400 mm (237.0 x 94.5 in), and the columns are 2,700 mm (106.3 in) apart. If the part is wider, the MVP-6040 has the same X on 3,500 mm (137.8 in) columns.
The moving cross rail is what separates this series from a fixed-rail bridge mill. It rides on box ways through 1,250 mm (49.2 in) of W travel, balanced by a double hydraulic cylinder, and can be locked wherever it stops. Under it, the Z ram has 1,000 mm (39.4 in) of stroke as standard, with 1,200 or 1,400 mm optional. Short tools can therefore work close to the rail on a low part, and the rail lifts clear for a tall one.
X rapid is 10 m/min (394 ipm), the same as the MVP-5032, so nothing is lost in positioning speed for the added length. Listed accuracy under VDI is P = 0.035 mm over full travel with P = 0.026 mm repeatability. Weight is 80,000 kg (176,367 lb).
Full Specifications
| Parameter | Value |
|---|---|
| X Axis Travel | 6,000 mm (236.2 in) |
| Y Axis Travel | 3,200 mm (126.0 in) |
| Z Axis Travel | 1,000 mm (39.4 in) (Opt. 1,200 / 1,400 mm) |
| W Axis Travel | 1,250 mm (49.2 in) |
| Table Size | 6,020 x 2,400 mm (237.0 x 94.5 in) |
| Max Table Load | 20,000 kg (44,092 lb) |
| Distance Between Columns | 2,700 mm (106.3 in) |
| Distance Spindle Nose to Table | 200 ~ 2,450 mm (7.87" ~ 96.45") |
| Max Spindle Speed | V : 10 ~ 4,000 rpm ; H : 20 ~ 3,000 rpm |
| Spindle Motor Power | 22 / 26 kW (30 / 35 HP) |
| Spindle Taper | BT 50 |
| Rapid Traverse X | 10 m/min (394 ipm) |
| Rapid Traverse Y | 12 m/min (472 ipm) |
| Rapid Traverse Z | 10 m/min (394 ipm) |
| Rapid Traverse W | 3 m/min (118 ipm) |
| Cutting Feed Rate | 5 m/min (197 ipm) |
| Tool Capacity | 60 T |
| Max Tool Diameter (full magazine) | Ø127 / Ø215 mm (Ø5.0 / Ø8.5 in) |
| Max Tool Length | 400 mm (15.7 in) |
| Max Tool Weight | 20 kg (44 lb) |
| Positioning Accuracy Jis B 6338 | ± 0.010 mm / Full Travel |
| Positioning Accuracy VDI 3441 | P = 0.035 mm / Full Travel |
| Repeatability Jis B 6338 | ± 0.003 mm |
| Repeatability VDI 3441 | P = 0.026 mm |
| Power Requirement | AC 220 + 10% 3 phase / 80 KVA |
| Air Pressure Requirement | 5 ~ 8 kg/cm² |
| Hydraulic Tank Capacity | 290 L |
| Lubrication Tank Capacity | 6 L |
| Coolant Tank Capacity | 750 L |
| Machine Weight | 80,000 kg (176,367 lb) |
Specifications sourced from awea.com — verified 2026-10-04
Strengths & Limitations
Strengths
- Shortest MVP with the 20,000 kg (44,092 lb) table load
- X-axis ball screw vibration damping mechanism, fitted from this length upward
- X rapid holds at 10 m/min (394 ipm), where the MVP-7032 drops to 7.5 m/min (295 ipm)
- Cross rail balanced by a double hydraulic cylinder and locked in any position over 1,250 mm (49.2 in) of W travel
- Z travel of 1,000 mm (39.4 in) with 1,200 and 1,400 mm options
Limitations
- VDI positioning accuracy of P = 0.035 mm over full travel, wider than the P = 0.025 mm of the MVP-4032
- Y travel of 3,200 mm (126.0 in) and 2,700 mm (106.3 in) between columns; the MVP-6040 gives 4,000 mm (157.5 in) and 3,500 mm (137.8 in)
- W-axis rapid is 3 m/min (118 ipm), so repositioning the cross rail is a slow move
- 80,000 kg (176,367 lb) of machine weight to plan the foundation around
Best For
Frequently Asked Questions
01
AWEA states that the X-axis ball screw is equipped with a vibration damping mechanism on 6 m travel and above models only. The MVP-6032 has 6,000 mm (236.2 in) of X travel and is the shortest machine it applies to. The maker's stated purpose is to remove vibration and distortion and keep accuracy over the full travel.
02
W is the vertical movement of the whole cross rail: 1,250 mm (49.2 in) at 3 m/min (118 ipm) on box ways. It sets the working height of the head, and the 1,000 mm (39.4 in) Z ram then does the cutting strokes. The table lists the spindle nose to table distance as 200 ~ 2,450 mm. AWEA locks the rail with 6 pcs. of hydraulic locking mechanism.
03
Both are rated for 20,000 kg (44,092 lb). The MVP-7032 has 7,000 mm (275.6 in) of X travel but its X rapid is 7.5 m/min (295 ipm) and its VDI positioning accuracy is P = 0.040 mm. The MVP-6032 rapids at 10 m/min (394 ipm) with P = 0.035 mm. If the work fits 6,000 mm (236.2 in), the shorter machine is the quicker and tighter one on paper.
04
The table lists AC 220 three-phase power at 80 KVA and compressed air at 5 ~ 8 kg/cm². The machine weighs 80,000 kg (176,367 lb). Tank capacities are 750 L for coolant, 290 L for hydraulics and 6 L for lubrication.
More from AWEA
Other 5-Axis Machining Centers
Zayer THERA
TOS Kuřim FRF 250
GROB G600
Hermle C 250
GF Machining MIKRON MILL P 800 U S
