AWEA MVP-5032
Image: awea.com, AWEA
Key Specifications
Max Spindle
Spindle Taper
Tool Capacity
Table Size
Spindle Power
x axis travel
How much does the AWEA MVP-5032 cost?
Price estimate
We do not have a price for the AWEA MVP-5032 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
The AWEA MVP-5032 carries 18,000 kg (39,683 lb) on a 5,020 x 2,400 mm (197.6 x 94.5 in) table, and that rating is the main reason to pick it over the shorter MVP-4032, which is listed at 15,000 kg (33,069 lb). It is a double column bridge machine with a moving cross rail and a spindle head that cuts both vertically and horizontally. Travels are 5,000 mm (196.9 in) in X, 3,200 mm (126.0 in) in Y and 1,000 mm (39.4 in) in Z.
How the table is carried matters at this weight. AWEA supports it on 4 heavy duty guide-way rails: two linear guide ways and two box ways. The columns stand 2,700 mm (106.3 in) apart, which is the real limit on part width, not the table.
Speed is where the extra metre of bed shows. X rapid traverse falls to 10 m/min (394 ipm) from the 15 m/min (591 ipm) of the MVP-4032, while Y stays at 12 m/min (472 ipm) and Z at 10 m/min (394 ipm). Cutting feed is 5 m/min (197 ipm) on every model, so the difference appears in positioning moves between features and not in the cut. Accuracy widens a little too: P = 0.030 mm over full travel under VDI, with repeatability of P = 0.022 mm.
Above the table nothing changes from the siblings. The cross rail moves 1,250 mm (49.2 in) on W at 3 m/min (118 ipm). A 22 / 26 kW (30 / 35 HP) BT 50 spindle turns at 10 ~ 4,000 rpm vertically and 20 ~ 3,000 rpm horizontally, and the magazine holds 60 tools up to 400 mm (15.7 in) long and 20 kg (44 lb) each.
Full Specifications
| Parameter | Value |
|---|---|
| X Axis Travel | 5,000 mm (196.9 in) |
| Y Axis Travel | 3,200 mm (126.0 in) |
| Z Axis Travel | 1,000 mm (39.4 in) (Opt. 1,200 / 1,400 mm) |
| W Axis Travel | 1,250 mm (49.2 in) |
| Table Size | 5,020 x 2,400 mm (197.6 x 94.5 in) |
| Max Table Load | 18,000 kg (39,683 lb) |
| Distance Between Columns | 2,700 mm (106.3 in) |
| Distance Spindle Nose to Table | 200 ~ 2,450 mm (7.87" ~ 96.45") |
| Max Spindle Speed | V : 10 ~ 4,000 rpm ; H : 20 ~ 3,000 rpm |
| Spindle Motor Power | 22 / 26 kW (30 / 35 HP) |
| Spindle Taper | BT 50 |
| Rapid Traverse X | 10 m/min (394 ipm) |
| Rapid Traverse Y | 12 m/min (472 ipm) |
| Rapid Traverse Z | 10 m/min (394 ipm) |
| Rapid Traverse W | 3 m/min (118 ipm) |
| Cutting Feed Rate | 5 m/min (197 ipm) |
| Tool Capacity | 60 T |
| Max Tool Diameter (full magazine) | Ø127 / Ø215 mm (Ø5.0 / Ø8.5 in) |
| Max Tool Length | 400 mm (15.7 in) |
| Max Tool Weight | 20 kg (44 lb) |
| Positioning Accuracy Jis B 6338 | ± 0.010 mm / Full Travel |
| Positioning Accuracy VDI 3441 | P = 0.030 mm / Full Travel |
| Repeatability Jis B 6338 | ± 0.003 mm |
| Repeatability VDI 3441 | P = 0.022 mm |
| Power Requirement | AC 220 + 10% 3 phase / 80 KVA |
| Air Pressure Requirement | 5 ~ 8 kg/cm² |
| Hydraulic Tank Capacity | 290 L |
| Lubrication Tank Capacity | 6 L |
| Coolant Tank Capacity | 750 L |
| Machine Weight | 75,000 kg (165,344 lb) |
Specifications sourced from awea.com — verified 2026-10-04
Strengths & Limitations
Strengths
- 18,000 kg (39,683 lb) table load on a 5,020 x 2,400 mm (197.6 x 94.5 in) table
- Table carried on 4 heavy duty guide-way rails, two linear guide ways and two box ways
- 5,000 mm (196.9 in) of X travel at 75,000 kg (165,344 lb), lighter than the 80,000 kg (176,367 lb) MVP-6032
- Y rapid of 12 m/min (472 ipm), faster than the 10 m/min (394 ipm) of the MVP-5040
- 60-tool magazine taking tools up to 400 mm (15.7 in) and 20 kg (44 lb)
Limitations
- X rapid of 10 m/min (394 ipm), down from 15 m/min (591 ipm) on the MVP-4032
- No X-axis ball screw vibration damping mechanism: AWEA fits it to 6 m travel and above models only
- Table load stops at 18,000 kg (39,683 lb); the MVP-6032 is rated 20,000 kg (44,092 lb)
- Needs an 80 KVA three-phase supply and 5 ~ 8 kg/cm² air
Best For
Frequently Asked Questions
01
18,000 kg (39,683 lb) on a table of 5,020 x 2,400 mm (197.6 x 94.5 in). The MVP-4032 is listed at 15,000 kg (33,069 lb), and the MVP-6032, MVP-7032 and MVP-8032 at 20,000 kg (44,092 lb). AWEA states the working table is fully supported by 4 guide-way rails, two of them linear guide ways and two box ways.
02
Only in X rapid traverse: 10 m/min (394 ipm) against the 15 m/min (591 ipm) of the MVP-4032. Y at 12 m/min (472 ipm), Z at 10 m/min (394 ipm), W at 3 m/min (118 ipm) and the 5 m/min (197 ipm) cutting feed rate are the same on both machines.
03
The table lists a 60 T magazine with a maximum tool diameter of Ø127 / Ø215 mm (Ø5.0 / Ø8.5 in), a maximum length of 400 mm (15.7 in) and a maximum weight of 20 kg (44 lb). The taper is BT 50. Tools are exchanged for the vertical or the horizontal spindle at any W-axis position.
04
AWEA names the FANUC Oi-MD as the standard CNC control and says other controllers are also available. A Five Sided Coordinate Conversion System is listed as standard, which is the function that carries work coordinates from the top face to the side faces.
More from AWEA
Other 5-Axis Machining Centers
Zayer TEBAS
Breton Matrix 800
Hartford HSA-832EA
Hurco VMX30UHSi
Emco Dynamill G5
