AWEA HVM-4025
Key Specifications
Spindle Taper
Tool Capacity
Table Size
Spindle Power
x axis travel
y axis travel
How much does the AWEA HVM-4025 cost?
Price estimate
We do not have a price for the AWEA HVM-4025 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
The AWEA HVM-4025 opens the middle frame of the HVM five-face bridge range. Its columns are 2,500 mm (98.4 in) apart, the table measures 4,020 x 2,010 mm (158.3 x 79.1 in), and the travels are 4,000 mm (157.5 in) in X, 3,200 mm (126.0 in) in Y and 1,000 mm (39.3 in) in Z.
Three HVM machines share that 4,000 mm X stroke, and they differ only in how wide a part they accept. The HVM-4018 has 1,800 mm (70.9 in) between the columns. The HVM-4032 has 3,200 mm (126.0 in). What does not change across the three is the table rating: 12,000 kg (26,400 lb) here, and the same on both siblings. A wider table on this model therefore means more area for the same mass, which suits plate work and open fabrications better than solid blocks.
Weight is 53,000 kg (116,600 lb), and the footprint is 10,480 mm (413 in) by 6,775 mm (267 in) with a height of 5,600 mm (220 in). X rapid is 15,000 mm/min (590.6 IPM) and cutting feed is 1 ~ 10,000 mm/min (0.04 ~ 393.7 IPM). No rapid figure for Y or Z appears in this model's table, so ask AWEA for it if cross-travel time matters to your cycle.
Tooling is common to the whole series. The spindle is BT 50 (7 / 24) with a 22 / 26 kW (30 / 35 HP) motor, and the magazine takes 60 tools, or 90 or 120 as options, each up to 400 mm (15.7 in) long and 25 kg (55 lb).
Full Specifications
| Parameter | Value |
|---|---|
| X Axis Travel | 4,000 mm (157.5") |
| Y Axis Travel | 3,200 mm (126.0") |
| Z Axis Travel | 1,000 mm (39.3") |
| Table Size | 4,020 x 2,010 mm (158.3" x 79.1") |
| Max Table Load | 12,000 kg (26,400 lb) |
| Distance Between Columns | 2,500 mm (98.4") |
| Spindle Motor Power | 22 / 26 kW (30 / 35 HP) |
| Spindle Taper | BT 50 (7 / 24) |
| Distance Spindle Nose to Table | 200 ~ 1,200 mm (7.9" ~ 47.2") (Standard) 400 ~ 1,400 mm (15.7" ~ 55.1") (Option) |
| Rapid Traverse X | 15,000 mm/min (590.6 IPM) |
| Cutting Feed Rate | 1 ~ 10,000 mm/min (0.04 ~ 393.7 IPM) |
| Repeatability Jis B 6338 | ± 0.003 mm (± 0.0001") |
| Positioning Accuracy Jis B 6338 | ± 0.015 mm (± 0.0006") full travel |
| Tool Capacity | 60 tools (90, 120 Option) |
| Max Tool Diameter (full magazine) | 127 / 240 mm (5.0" / 9.4") |
| Max Tool Length | 400 mm (15.7") |
| Max Tool Weight | 25 kg (55 lb) |
| Tool Change Time | 80 sec. |
| Machine Length | 10,480 mm (413") |
| Machine Width | 6,775 mm (267") |
| Machine Height | 5,600 mm (220") |
| Machine Weight | 53,000 kg (116,600 lb) |
Specifications sourced from awea.com — verified 2026-10-04
Strengths & Limitations
Strengths
- 2,500 mm (98.4 in) between the columns, against 1,800 mm (70.9 in) on the HVM-4018
- 4,020 x 2,010 mm (158.3 x 79.1 in) table with 3,200 mm (126.0 in) of Y travel
- Keeps the 15,000 mm/min (590.6 IPM) X rapid and the 10,000 mm/min (393.7 IPM) top cutting feed of the smaller machines
- Magazine accepts tools up to 400 mm (15.7 in) long and 25 kg (55 lb)
- Repeatability of ± 0.003 mm (± 0.0001 in)
Limitations
- Table load stays at 12,000 kg (26,400 lb) although the table is wider than that of the HVM-4018
- No Y or Z rapid traverse figure is listed for this model
- 53,000 kg (116,600 lb) machine weight, heavier than the 49,000 kg (107,800 lb) HVM-4018
- Z travel is 1,000 mm (39.3 in) on every HVM size, so a taller part is not a reason to move up
Best For
Frequently Asked Questions
01
Width. All three have 4,000 mm (157.5 in) of X travel and a 12,000 kg (26,400 lb) table. The HVM-4018 has 1,800 mm (70.9 in) between the columns and 2,500 mm (98.4 in) of Y. The HVM-4025 has 2,500 mm (98.4 in) between the columns and 3,200 mm (126.0 in) of Y. The HVM-4032 has 3,200 mm (126.0 in) between the columns and 3,900 mm (153.5 in) of Y.
02
The table load capacity is 12,000 kg (26,400 lb) on a 4,020 x 2,010 mm (158.3 x 79.1 in) table. Count fixtures, risers and angle plates in that figure. For more mass on this frame width the HVM-6025 is rated at 17,000 kg (37,400 lb), with 6,000 mm (236.2 in) of X travel.
03
Yes. Y travel is 3,200 mm (126.0 in), while the table is 2,010 mm (79.1 in) wide and the columns are 2,500 mm (98.4 in) apart. The surplus stroke lets the head move out past the edge of the part for work on its side faces.
04
The machine weighs 53,000 kg (116,600 lb) and is listed at 10,480 mm (413 in) long, 6,775 mm (267 in) wide and 5,600 mm (220 in) high. Foundation design, crane capacity and door openings should all be checked against those figures, plus the 12,000 kg (26,400 lb) the table can add.
More from AWEA
Other 5-Axis Machining Centers
PAMA Speedmat VM
Grob G550
DMG Mori DMU 105 FD monoBLOCK
Makino a800Z
Emco UMILL 1800
