AWEA MEGA5 P4032
Key Specifications
Max Spindle
Spindle Taper
Tool Capacity
Table Size
x axis travel
y axis travel
How much does the AWEA MEGA5 P4032 cost?
Price estimate
We do not have a price for the AWEA MEGA5 P4032 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
AWEA sells three 5-axis machines with 4,000 mm (157.5 in) of X travel, and the AWEA MEGA5 P4032 is the middle one in every respect that matters for installation: part width, mass and tool size. It is a fixed-bridge machine with 3,200 mm (126.0 in) of Y, 1,000 mm (39.4 in) of Z (1,200 mm optional) and a 4,020 x 2,400 mm (158.3 x 94.5 in) table.
Below it sits the MEGA5 P4026, a 37,000 kg (81,570 lb) machine for parts 1,500 mm (59.1 in) wide with an HSK-A63 spindle. Above it is the MEGA5 G4037, a 72,000 kg (158,730 lb) gantry machine with 3,700 mm (145.7 in) of Y. The MEGA5 P4032 weighs 51,500 kg (113,536 lb), accepts workpieces 2,400 mm (94.5 in) wide, and loads up to 15,000 kg (33,069 lb) on its table.
Its listed head is the TCH-30F with an HSK-A100 spindle, 40 / 50 kW (53.6 / 67.1 hp) and 12,000 rpm. Cross roller bearings carry the rotary axes, and absolute encoders on them are standard equipment. Tools go up to 15 kg (33 lb) in a 40-position magazine, twice the pocket count of the MEGA5 G4037 with its 20 T.
On feeds the picture is mixed. X rapid is 15 m / min, a step below the 20 m / min of the MEGA5 P3032, with Y at 12 m / min and Z at 10 m / min. The cutting feed stays at 10 m / min, and so does the VDI accuracy: P = 0.025 mm positioning and Ps = 0.018 mm repeatability, the same values AWEA gives the shorter MEGA5 P3032.
Full Specifications
| Parameter | Value |
|---|---|
| X Axis Travel | 4,000 mm (157.5 in) |
| Y Axis Travel | 3,200 mm (126.0 in) |
| Z Axis Travel | 1,000 mm (39.4 in) (opt. 1,200 mm) |
| Table Size | 4,020 x 2,400 mm (158.3 x 94.5 in) |
| Max Table Load | 15,000 kg (33,069 lb) |
| Distance Between Columns | 2,700 mm (106.3 in) |
| Distance Spindle Nose to Table | TCH-30F = 200 ~ 1,200 mm (opt. 200 ~ 1,400 mm) TCH-20F = 200 ~ 1,200 mm (opt. 200 ~ 1,400 mm) |
| Distance 90 Deg Spindle Center to Table | TCH-30F = 550 ~ 1,550 mm (opt. 550 ~ 1,750 mm) TCH-20F = 510 ~ 1,510 mm (opt. 510 ~ 1,710 mm) |
| T-Slots | 28 x 200 mm |
| Spindle Taper | HSK-A100 |
| Spindle Power S1 S6 40 | 40 / 50 kW (53.6 / 67.1 hp) |
| Max Spindle Speed | 12,000 rpm |
| Rapid Traverse X | 15 m / min |
| Rapid Traverse Y | 12 m / min |
| Rapid Traverse Z | 10 m / min |
| Cutting Feed Rate | 10 m / min |
| Tool Capacity | 40 T |
| Max Tool Length | 350 mm (13.8 in) |
| Max Tool Weight | 15 kg (33 lb) |
| Max Tool Diameter (full magazine) | Ø140 / Ø180 mm (Ø5.5 / Ø7.1 in) |
| Positioning Accuracy Jis B 6338 | ± 0.010 mm / Full Travel |
| Positioning Accuracy VDI 3441 | P = 0.025 mm / Full Travel |
| Repeatability Jis B 6338 | ± 0.003 mm |
| Repeatability VDI 3441 | Ps = 0.018 mm |
| Coolant Tank Capacity | 750 liter |
| Lubrication Tank Capacity | 6 liter |
| Hydraulic Tank Capacity | 150 liter |
| Air Pressure Requirement | 5 ~ 8 kg/cm² |
| Machine Weight | 51,500 kg (113,536 lb) |
| Max Workpiece Length | 4,000 mm (157.5 in) |
| Max Workpiece Width | 2,400 mm (94.5 in) |
| Max Workpiece Height | 850 mm (33.5 in) |
Specifications sourced from awea.com — verified 2026-10-04
Strengths & Limitations
Strengths
- Table load of 15,000 kg (33,069 lb) on a 4,020 x 2,400 mm (158.3 x 94.5 in) table
- VDI accuracy of P = 0.025 mm and Ps = 0.018 mm, unchanged from the MEGA5 P3032 despite the longer X
- 40-position magazine for tools up to 15 kg (33 lb); the MEGA5 G4037 gantry machine holds 20 T
- 51,500 kg (113,536 lb), well under the 72,000 kg (158,730 lb) of the MEGA5 G4037
- Full 10 m / min cutting feed, which the longer MEGA5 P5032 does not keep
Limitations
- X rapid of 15 m / min; the MEGA5 P3032 reaches 20 m / min
- Part width ends at 2,400 mm (94.5 in), while the MEGA5 G4037 lists 3,700 mm (145.7 in)
- 12,000 rpm maximum with the listed TCH-30F head
- The 1,200 mm Z travel is an option, and coolant through spindle is too
Best For
Frequently Asked Questions
01
The MEGA5 P4026 suits narrow parts, up to 1,500 mm (59.1 in) wide, and high spindle speed at 24,000 rpm. The MEGA5 P4032 takes parts 2,400 mm (94.5 in) wide and 15,000 kg (33,069 lb) with a 12,000 rpm HSK-A100 spindle. The MEGA5 G4037 is a gantry machine with 3,700 mm (145.7 in) of Y travel and a table load given as 2,500 kg / m².
02
The table measures 4,020 x 2,400 mm (158.3 x 94.5 in) and has 28 x 200 mm T-slots (width x pitch). The largest workpiece AWEA lists is 4,000 mm (157.5 in) long, 2,400 mm (94.5 in) wide and 850 mm (33.5 in) high, and the distance between the columns is 2,700 mm (106.3 in).
03
Only in X rapid traverse, which is 15 m / min here and 20 m / min on the MEGA5 P3032. Y rapid at 12 m / min, Z rapid at 10 m / min and the 10 m / min cutting feed are the same on both. Time spent in the cut is therefore unaffected; only long repositioning moves along the table take longer.
04
A two-axis B/C fork head made in Italy. On the TCH-30F the B-axis fork is GGG40 cast iron, and AWEA describes the fork as symmetric so that cutting forces spread evenly. Both axes use direct drive motors, the B-axis two of them. The head has an integrated water cooling circuit and hydraulic clamping.
05
Coolant tank 750 liter, hydraulic tank 150 liter, lubrication tank 6 liter. Compressed air must be supplied at 5 ~ 8 kg/cm².
