SW BA W06-32
Key Specifications
Spindle Taper
Spindle Power
number of spindles
spindle distance
spindle speed range
spindle torque
How much does the SW BA W06-32 cost?
Price estimate
We do not have a price for the SW BA W06-32 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
The SW BA W06-32 is a three-spindle machining center on linear drives. The spindles are 425 mm (16.7 in) apart, and each has 425 mm (16.7 in) of X, 600 mm (23.6 in) of Y and 500 mm (19.7 in) of Z.
Three is the answer to a packaging problem. Inverter housings, small stator housings and wheel carriers are often a little too wide for a four-spindle pitch once clamps are counted. On a two-spindle machine a good part of the width then goes unused. At 425 mm, three such parts fit the frame that otherwise holds two.
The spindle is the HSK-A63 unit with a 1-17,500 rpm range, 32 kW and 72 Nm per spindle. No larger interface is listed for this model. In aluminium that rating covers drilling, tapping, and milling with medium-sized cutters.
The model has two work tables in SW's naming scheme, and its 4th axis clears Ø 675 x 1,430 mm, the same figure as the two-spindle BA W06-22. SW lists independent Z and X axes for the series, which matters more as spindles are added. Three parts never sit at exactly the nominal spacing, and separate axis corrections keep each one in tolerance. Tooling and fixtures come in sets of three.
Full Specifications
| Parameter | Value |
|---|---|
| Number of Spindles | 3 |
| Spindle Distance | 425 mm (16.7 in) |
| Spindle Speed Range | 1 – 17,500 min-1 |
| Spindle Motor Power | 32 kW (42.9 hp) per spindle |
| Spindle Torque | 72 Nm (53.1 lb-ft) per spindle |
| Spindle Taper | HSK-A63 |
| X Axis Travel | 425 mm (16.7 in) |
| Y Axis Travel | 600 mm (23.6 in) |
| Z Axis Travel | 500 mm (19.7 in) |
| Interference Circle 4th Axis | Ø 675 x 1,430 mm (Ø 26.6 x 56.3 in) |
Specifications sourced from sw-machines.com — verified 2026-10-04
Strengths & Limitations
Strengths
- Three HSK-A63 spindles at a 425 mm (16.7 in) spindle distance
- 17,500 rpm, 32 kW and 72 Nm per spindle with linear drives
- Two work tables and a Ø 675 x 1,430 mm interference circle
- Independent Z and X axes on SW's feature list for the series
Limitations
- HSK-A63 only: no HSK-A80 or HSK-A100 as on the BA W06-22
- 72 Nm per spindle limits heavy cuts
- 425 mm (16.7 in) of X per spindle
- Tools and fixtures in threes complicate planning
Best For
Frequently Asked Questions
01
425 mm (16.7 in), with the same figure as X travel per spindle. Y is 600 mm (23.6 in) and Z is 500 mm (19.7 in).
02
Pitch. The BA W06-22 offers 600 mm (23.6 in) per part and the BA W06-42 offers 300 mm (11.8 in). Parts in between waste space on the first and do not fit the second. At 425 mm (16.7 in) the BA W06-32 machines three of them per cycle.
03
An HSK-A63 spindle with a speed range of 1-17,500 rpm, 32 kW and 72 Nm, three times over. SW's table shows no other interface for this model.
04
It has two work tables by SW's naming scheme, and the series feature list names loading and unloading in parallel to machining time. Three parts are cut while three more are clamped on the other table.
More from SW
Other Horizontal Machining Centers (HMC)
Hwacheon H6
Matsuura H.Plus-630
Enshu GE30H
Huron SX 4
Quaser HX504 Cell
