Onsrud 456GW10 5-Axis
Key Specifications
Max Spindle
Tool Capacity
Spindle Power
table size x
table size y
machine length
How much does the Onsrud 456GW10 5-Axis cost?
Price estimate
We do not have a price for the Onsrud 456GW10 5-Axis that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
The Onsrud 456GW10 5-Axis joins a thirty-eight-foot table to the deepest stroke in the G-Series 5-Axis chart, 40 in (1,016 mm). The table is 456 in (11,583 mm) long and 120 in (3,048 mm) wide, with 11 vacuum zones as standard.
Onsrud lists this code in the 40 in block only. The same frame with a 28 in stroke is the 468GW10 5-Axis, a foot longer in table and lower. With 16 in or 18 in it is the 480GW10 5-Axis. Buyers should decide on stroke first, because the model code, the table and the building all follow from it.
A machine 602 in (15,291 mm) long, 200 in (5,080 mm) wide and 167 in (4,242 mm) high needs a dedicated bay. It earns one where long, deep tools are made regularly: hull and deck moulds for production boats, fuselage and wing tools, rail vehicle nose patterns. The ten-foot width takes most single hulls up to that length. Catamaran decks and very beamy boats are the case for the twelve-foot 456GW12 5-Axis.
The head is the series standard, 18 hp (13.4 kW) and 24,000 rpm with 12 tools, unless the 33 hp (24.6 kW) spindle is ordered. When the tools are smaller than the bed, the dual gantry option lets two of them be machined at once.
Full Specifications
| Parameter | Value |
|---|---|
| Table Size X | 456 in (11,583 mm) |
| Table Size Y | 120 in (3,048 mm) |
| Machine Length | 602 in (15,291 mm) |
| Machine Width | 200 in (5,080 mm) |
| Machine Height | 167 in (4,242 mm) |
| Vacuum Zones Standard | 11 |
| Spindle Motor Power | 18 hp (13.4 kW) |
| Max Spindle Speed | 24,000 rpm |
| Tool Capacity | 12 (larger capacity tool changers optional) |
| Z Stroke | 40 in (1,016 mm) |
| Spindle Power Optional | 33 hp (24.6 kW) |
| Dual Gantry | Optional |
| Second Tool Changer | Optional |
Specifications sourced from cronsrud.com — verified 2026-10-05
Strengths & Limitations
Strengths
- 456 in (11,583 mm) by 120 in (3,048 mm) table with 40 in (1,016 mm) of Z
- 11 vacuum zones as standard
- Dual gantry and 33 hp (24.6 kW) spindle offered
- Narrower frame than the twelve-foot machine of the same length
Limitations
- Footprint of 602 in (15,291 mm) by 200 in (5,080 mm)
- Machine height of 167 in (4,242 mm)
- A foot less table than the 28 in 468GW10 5-Axis
Best For
Frequently Asked Questions
01
456 in (11,583 mm) in X by 120 in (3,048 mm) in Y. It has a 40 in (1,016 mm) Z-stroke and 11 vacuum zones as standard.
02
602 in (15,291 mm) long, 200 in (5,080 mm) wide and 167 in (4,242 mm) high. That is about fifty feet of length and nearly fourteen feet of height before any crane, ducting or guarding.
03
For the stroke. The 468GW10 5-Axis has 28 in of Z, a table X of 468 in (11,888 mm) and a height of 155 in (3,937 mm). The 456GW10 5-Axis has 40 in of Z on a 456 in (11,583 mm) table and is 167 in (4,242 mm) high.
04
The 456GW12 5-Axis, which has the same table X and adds two feet of width, with 144 in (3,658 mm) of table Y and a frame 224 in (5,690 mm) wide. The 456GW12 5-Axis is listed with 28 in or 40 in of Z.
