Komo Fusion Twin Table

Specs verified 2026-10-05 · komo.com Updated 2026-10-05

Key Specifications

Max Spindle

Up to 24,000 rpm, fully programmable

Spindle Taper

HSK 63F

Tool Capacity

15 tools per spindle standard. Max tool capacity is 30 with an optional second head

Table Size

1205: (2) 72 in (1,829 mm) x 60 in (1,524 mm); 1206: (2) 72 in (1,829 mm) x 72 in (1,829 mm)

Spindle Power

18 hp (13.2 kW), four-pole, fan cooled (standard)

spindle quantity

One (1) standard, two (2) optional Hiteco or HSD spindle

How much does the Komo Fusion Twin Table cost?

Price estimate

Uncertain

We do not have a price for the Komo Fusion Twin Table that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.

Overview

The Komo Fusion Twin Table is a twin-table router that can also be a twin-spindle one. Komo developed it for buyers who want two tables with one or two spindles, each spindle carrying its own 15-tool changer.

Two models are listed. The 1205 has two tables of 72 in (1,829 mm) x 60 in (1,524 mm), and the 1206 two of 72 in (1,829 mm) x 72 in (1,829 mm). These are wider than the 60 in tables of the Xtreme Twin Table, which is the reason to look at this model first if the blanks are large. Each table has four 1 in (25 mm) part location pins. The gantry travels 175 in (4,394 mm) across both tables and Z travel is 11 in (279 mm).

With one spindle the machine works as a pendulum: cut on the left, load on the right, then swap. With the optional second spindle the two heads can work at once, and tool capacity doubles from 15 to 30. Komo sizes the dust interface for that case at 9 in (229 mm) diameter for 2 spindles, with a recommended 900 cfm per spindle. The standard spindle is 18 hp (13.2 kW), four-pole and fan cooled, with an HSK 63F taper and up to 24,000 rpm.

Traverse rates are 3,150 ipm (80 m/min) in X, 2,300 ipm (58.5 m/min) in Y and 900 ipm (22.7 m/min) in Z. Acceleration is 83 in/sec², well below the 205 in/sec² of the single-table Fusion XL. Among the options Komo lists a different table arrangement, a single 144 in x 60 in table or 48 in and 96 in x 60 in tables, for shops whose work does not split evenly in two.

Full Specifications

Parameter	Value
Spindle Motor Power	18 hp (13.2 kW), four-pole, fan cooled (standard)
Max Spindle Speed	Up to 24,000 rpm, fully programmable
Spindle Taper	HSK 63F
Spindle Quantity	One (1) standard, two (2) optional Hiteco or HSD spindle
Part Location Pins	Four (4) 1 in (25 mm) part location pins per table
Table Size	1205: (2) 72 in (1,829 mm) x 60 in (1,524 mm); 1206: (2) 72 in (1,829 mm) x 72 in (1,829 mm)
Tool Capacity	15 tools per spindle standard. Max tool capacity is 30 with an optional second head
Max Tool Diameter (full magazine)	3.25 in (82 mm) positions full; 6.5 in (165 mm) adjacent positions empty
Max Tool Weight	12 lbs each / 96 lbs total (5.4 kg / 43.5 kg)
Max Tool Length	5 in (127 mm)
Tool Changer Type	Aggregate-capable tool changer
Feed Rate Traverse X	3,150 ipm (80 m/min)
Feed Rate Traverse Y	2,300 ipm (58.5 m/min)
Feed Rate Traverse Z	900 ipm (22.7 m/min)
Acceleration Deceleration	83 in/sec²
X Axis Travel	1205: 175 in (4,394 mm) Gantry; 1206: 175 in (4,394 mm) Gantry
Z Axis Travel	1205: 11 in (279 mm); 1206: 11 in (279 mm)
CNC Control	FANUC Controls with integrated PC and 19 in touch screen display
Dust Collection Interface	9 in (229 mm) dia (2 spindles) recommended volume 900 cfm per spindle
Vacuum System	With low vacuum sensing interface

Specifications sourced from komo.com — verified 2026-10-05

Strengths & Limitations

Strengths

Two tables of 72 in (1,829 mm) x 60 in (1,524 mm) or 72 in (1,829 mm) x 72 in (1,829 mm)
One spindle as standard, two as an option, each with a spindle-mounted 15-tool changer
Aggregate-capable tool changers, 30 tools in total with the second head
X traverse of 3,150 ipm (80 m/min) along the 175 in (4,394 mm) gantry travel
Optional single 144 in x 60 in table or 48 in and 96 in x 60 in table split

Limitations

Acceleration is 83 in/sec², against 205 in/sec² on the Fusion XL
Z travel is 11 in (279 mm)
Komo's two figures for the Y travel of this model do not agree with each other, so that row is left out here and should be confirmed
The second spindle that makes simultaneous cutting possible is an option
Tools are limited to 5 in (127 mm) in length

Best For

Pendulum production of parts up to 72 in (1,829 mm) wide Two-spindle cutting of paired parts Wood, plastic, composite and aluminum components made in repeating batches Shops that want to reconfigure between two tables and one long table

Frequently Asked Questions

01 What is the difference between the Fusion Twin Table 1205 and 1206?

Table depth. The 1205 has two tables of 72 in (1,829 mm) x 60 in (1,524 mm) and the 1206 two tables of 72 in (1,829 mm) x 72 in (1,829 mm). Komo lists the same gantry travel of 175 in (4,394 mm) and the same Z travel of 11 in (279 mm) for both.

02 How many spindles and tools does the Fusion Twin Table have?

One Hiteco or HSD spindle is standard and two are optional. Each spindle has a 15-tool changer mounted on it, so the maximum tool capacity is 30 with the optional second head. The standard spindle is rated 18 hp (13.2 kW) and runs up to 24,000 rpm with an HSK 63F taper.

03 Can the two tables be used as one?

Komo lists a configuration option of a single 144 in x 60 in table, or tables of 48 in and 96 in x 60 in, in place of the two equal tables. That lets a full-length sheet be machined on a machine otherwise set up for pendulum work.

04 What dust collection does it need?

The interface is 9 in (229 mm) in diameter for 2 spindles, and Komo recommends a volume of 900 cfm per spindle. Air blast at the tool is a listed feature for chip evacuation and cooling, and the vacuum system has a low vacuum sensing interface.