Onsrud 468GW10 5-Axis
Key Specifications
Max Spindle
Tool Capacity
Spindle Power
table size x
table size y
machine length
How much does the Onsrud 468GW10 5-Axis cost?
Price estimate
We do not have a price for the Onsrud 468GW10 5-Axis that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
The Onsrud 468GW10 5-Axis is a thirty-nine-foot, ten-foot-wide 5-axis gantry router with a 28 in (711 mm) Z-stroke. Onsrud's table gives the table as 468 in (11,888 mm) by 120 in (3,048 mm) and lists 10 vacuum zones.
Its code is one of three for the long ten-foot-wide frame. With 16 in or 18 in of Z the machine is the 480GW10 5-Axis. With 40 in it is the 456GW10 5-Axis. The table shrinks by a foot at each step as the stroke grows, and this is the middle one.
A machine like this is bought for parts that are both long and shaped. Yacht hull plugs. Aerospace tools. Bus and coach body patterns. On a 468 in (11,888 mm) bed, one large tool can be machined in a single setup, or several smaller ones can be staged while the machine keeps cutting. A second gantry, listed as an upgrade, turns the bed into two machines when the work is smaller.
The frame measures 571 in (14,504 mm) by 200 in (5,080 mm) and is 155 in (3,937 mm) high. Standard equipment is one 18 hp (13.4 kW), 24,000 rpm spindle and 12 tools. For a bed of this length, the second 12-position rotary ATC and the floating duct dust system that Onsrud mentions are close to necessities.
Full Specifications
| Parameter | Value |
|---|---|
| Table Size X | 468 in (11,888 mm) |
| Table Size Y | 120 in (3,048 mm) |
| Machine Length | 571 in (14,504 mm) |
| Machine Width | 200 in (5,080 mm) |
| Machine Height | 155 in (3,937 mm) |
| Vacuum Zones Standard | 10 |
| Spindle Motor Power | 18 hp (13.4 kW) |
| Max Spindle Speed | 24,000 rpm |
| Tool Capacity | 12 (larger capacity tool changers optional) |
| Z Stroke | 28 in (711 mm) |
| Spindle Power Optional | 33 hp (24.6 kW) |
| Dual Gantry | Optional |
| Second Tool Changer | Optional |
Specifications sourced from cronsrud.com — verified 2026-10-05
Strengths & Limitations
Strengths
- 468 in (11,888 mm) by 120 in (3,048 mm) table with a 28 in (711 mm) Z-stroke
- 10 vacuum zones as standard
- Dual gantry option to split the bed into two work areas
- Lower than the 456GW10 5-Axis with its 40 in stroke
Limitations
- Footprint of 571 in (14,504 mm) by 200 in (5,080 mm)
- Machine height of 155 in (3,937 mm)
- One standard spindle and 12 tools for a very large envelope
Best For
Frequently Asked Questions
01
468 in (11,888 mm) in X by 120 in (3,048 mm) in Y. It is listed with a 28 in (711 mm) Z-stroke and 10 vacuum zones as standard.
02
By stroke and table length. The 480GW10 5-Axis has a 480 in (12,192 mm) table with 16 in or 18 in of Z. The 468GW10 5-Axis has 468 in (11,888 mm) with 28 in. The 456GW10 5-Axis has 456 in (11,583 mm) with 40 in.
03
The frame is 571 in (14,504 mm) long, 200 in (5,080 mm) wide and 155 in (3,937 mm) high. That is nearly forty-eight feet of length before loading space, and the machine needs a crane or lift to place work on a ten-foot-wide table.
04
With the optional dual gantry. Onsrud describes two gantries producing nested or similar parts in tandem, or one being parked while the other machines large parts end to end.
