Onsrud 480GW10 5-Axis
Key Specifications
Max Spindle
Tool Capacity
Spindle Power
table size x
table size y
machine length
How much does the Onsrud 480GW10 5-Axis cost?
Price estimate
We do not have a price for the Onsrud 480GW10 5-Axis that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
Forty feet long and ten feet wide, the table of the Onsrud 480GW10 5-Axis measures 480 in (12,192 mm) by 120 in (3,048 mm). Onsrud lists this code in the 16 in (406 mm) and 18 in (457 mm) Z-stroke blocks of its G-Series 5-Axis chart.
A detail separates the two versions. The 16 in machine shows 11 vacuum zones as standard and the 18 in machine shows 10. Frame length differs too: 590 in (14,986 mm) against 586 in (14,885 mm). Height is 103 in (2,617 mm) for the first and 140 in (3,556 mm) for the second. Only the width, 200 in (5,080 mm), is common.
Who needs a forty-foot 5-axis table with a shallow stroke? Shops that machine long skins and panels: wing and tail surfaces laid flat, mast sections, long vehicle bodysides, architectural cladding. Shops, too, that want to run several jobs along one bed with a second gantry. Onsrud describes two gantries working in tandem, or one parked while the other runs end to end.
For taller work at this size the codes change. Onsrud lists the 468GW10 5-Axis for a 28 in stroke and the 456GW10 5-Axis for 40 in. The standard head here is 18 hp (13.4 kW), 24,000 rpm, with 12 tools.
Full Specifications
| Parameter | Value |
|---|---|
| Table Size X | 480 in (12,192 mm) |
| Table Size Y | 120 in (3,048 mm) |
| Machine Length | 590 in (14,986 mm) with 16 in Z; 586 in (14,885 mm) with 18 in Z |
| Machine Width | 200 in (5,080 mm) |
| Machine Height | 103 in (2,617 mm) with 16 in Z; 140 in (3,556 mm) with 18 in Z |
| Vacuum Zones Standard | 11 with 16 in Z; 10 with 18 in Z |
| Spindle Motor Power | 18 hp (13.4 kW) |
| Max Spindle Speed | 24,000 rpm |
| Tool Capacity | 12 (larger capacity tool changers optional) |
| Z Stroke | 16 in (406 mm); 18 in (457 mm) |
| Spindle Power Optional | 33 hp (24.6 kW) |
| Dual Gantry | Optional |
| Second Tool Changer | Optional |
Specifications sourced from cronsrud.com — verified 2026-10-05
Strengths & Limitations
Strengths
- 480 in (12,192 mm) by 120 in (3,048 mm) table under a 5-axis head
- 11 vacuum zones with the 16 in stroke, 10 with the 18 in stroke
- Dual gantry listed for running jobs along one bed
- Lower machine height than the taller-stroke models of this width
Limitations
- Machine length of 590 in (14,986 mm)
- Frame width of 200 in (5,080 mm)
- Shallow Z-strokes only under this code
Best For
Frequently Asked Questions
01
Onsrud's table lists 11 for the 16 in Z-stroke version and 10 for the 18 in version. The table size is the same, 480 in (12,192 mm) by 120 in (3,048 mm), so confirm the zone layout with the maker.
02
The 16 in version is 590 in (14,986 mm) long and 103 in (2,617 mm) high. The 18 in version is 586 in (14,885 mm) long and 140 in (3,556 mm) high. Both are 200 in (5,080 mm) wide.
03
For 28 in of Z, Onsrud lists the 468GW10 5-Axis with a table X of 468 in (11,888 mm). For 40 in, it lists the 456GW10 5-Axis with 456 in (11,583 mm). Both keep the 120 in (3,048 mm) table width.
04
A dual gantry is on the upgrade list for the series. Onsrud says a second gantry gives versatility equivalent to another machine without extra floor space, working in tandem or with one gantry parked.
