HNK HB-130X
Key Specifications
Spindle Taper
Table Size
Spindle Power
x axis travel
y axis travel
z axis travel
How much does the HNK HB-130X cost?
Price estimate
We do not have a price for the HNK HB-130X that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
A bigger, stronger table on an unchanged machine: the HNK HB-130X takes the HB-130 and fits a 2,000 x 2,200 mm (78.7 x 86.6 in) rotary table rated for 15,000 kg (33,069 lb), with 20,000 kg (44,092 lb) in braces. The HB-130 table is 1,600 x 1,800 mm (63.0 x 70.9 in) and takes 12,000 kg (26,455 lb).
Axis travels are identical to the HB-130, and that is the point to think through. X is 3,000 mm (118.1 in) and the table is 2,000 mm wide in that direction; Y is 2,000 mm (78.7 in), with 2,300 mm (90.6 in) in braces. A part that fills the larger table leaves less spare travel around it, so the tool may not clear the edges of a full-size workpiece on every face without re-clamping. The X model is for heavy, bulky parts, not for parts that are larger in every direction.
Rotation is 1 rpm, the slowest among the Ø130 mm machines, which follows from the heavier table. Indexing remains 0.001° with pin location every 90°.
Spindle data is common to the group: Ø130 mm (5.1 in), 5 to 2,500 rpm, ISO 50, 22/26 kW (29.5/34.9 hp) cont/30min with 30/35 kW (40.2/46.9 hp) in braces. Z is 1,300 mm (51.2 in), or 1,600 mm (63.0 in) in braces, and W is 700 mm (27.6 in). Controls: Fanuc 31i-B, Siemens 840D.
Full Specifications
| Parameter | Value |
|---|---|
| X Axis Travel | 3,000 mm (118.1 in) |
| Y Axis Travel | 2,000 mm (78.7 in) {2,300 mm (90.6 in)} |
| Z Axis Travel | 1,300 mm (51.2 in) {1,600 mm (63.0 in)} |
| W Axis Travel | 700 mm (27.6 in) |
| Table Size | 2,000 x 2,200 mm (78.7 x 86.6 in) |
| Table Indexing | 0.001° (every 90° indexing by locate pin) |
| Table Type | Rotary |
| Max Rotary Table Load | 15,000 kg (33,069 lb) {20,000 kg (44,092 lb)} |
| Table Rotation Speed | 1 rpm |
| Spindle Diameter | Ø130 mm (5.1 in) |
| Spindle Speed Range | 5 ~ 2,500 rpm |
| Spindle Taper | ISO 50 |
| Spindle Motor Power | 22/26 kW (29.5/34.9 hp) {30/35 kW (40.2/46.9 hp)} (cont/30min) |
| CNC Control | Fanuc 31i-B, Siemens 840D |
Specifications sourced from en.hnkkorea.com — verified 2026-10-04
Strengths & Limitations
Strengths
- 15,000 kg (33,069 lb) table load, with 20,000 kg (44,092 lb) in braces
- 2,000 x 2,200 mm (78.7 x 86.6 in) rotary table, the largest on a Ø130 mm HB
- Same 3,000 mm (118.1 in) X and 700 mm (27.6 in) W as the HB-130
- 0.001° indexing with pin location every 90°
Limitations
- Travels are not extended to match the larger table
- Table rotation of 1 rpm, the slowest of the Ø130 mm models
- 22/26 kW (29.5/34.9 hp) spindle motor is unchanged from the HB-130S
Best For
Frequently Asked Questions
01
A larger and stronger table. The HB-130X has a 2,000 x 2,200 mm (78.7 x 86.6 in) rotary table for 15,000 kg (33,069 lb); the HB-130 has 1,600 x 1,800 mm (63.0 x 70.9 in) for 12,000 kg (26,455 lb). HNK's page does not define the letter itself.
02
No. Both list X 3,000 mm (118.1 in), Y 2,000 mm (78.7 in), Z 1,300 mm (51.2 in) and W 700 mm (27.6 in), with the same braced values on Y and Z. For a longer X on this spindle, the HB-130CX has 4,000 mm (157.5 in).
03
1 rpm, against 1.4 rpm on the HB-130. The figure is star-marked, so HNK can change it to the customer's requirements.
04
Yes. The HB-150 lists the same 2,000 x 2,200 mm (78.7 x 86.6 in) base table size, on a machine with a Ø150 mm (5.9 in) spindle and travel ranges that start where the HB-130X ends.
