HNK HB-130CX
Key Specifications
Spindle Taper
Table Size
Spindle Power
x axis travel
y axis travel
z axis travel
How much does the HNK HB-130CX cost?
Price estimate
We do not have a price for the HNK HB-130CX that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
4,000 mm (157.5 in) of X travel makes the HNK HB-130CX the longest fixed-specification machine in the HB series. Its table is 1,600 x 4,000 mm (63.0 x 157.5 in), of the Rotary + Sub table type, with a 1,600 x 1,600 mm (63.0 x 63.0 in) rotary section. Only the HB-150, whose X travel is quoted as a range, goes further.
It also lists a single Y figure, 2,300 mm (90.6 in). On the HB-130 and HB-130C that value appears in braces after 2,000 mm (78.7 in); here it is the stated travel. So the CX is the tall and long member of the Ø130 mm group, sized for bed castings, long gear cases, crane and excavator structures and similar fabricated parts.
The rotary table carries 10,000 kg (22,046 lb), with 15,000 kg (33,069 lb) in braces, more than the 7,000 kg (15,432 lb) of the HB-130C. It rotates at 1.4 rpm and indexes at 0.001°, pin-located every 90°.
Z travel is 1,300 mm (51.2 in), or 1,600 mm (63.0 in) in braces, and the W-axis adds 700 mm (27.6 in). The spindle is Ø130 mm (5.1 in), ISO 50, 5 to 2,500 rpm, with 22/26 kW (29.5/34.9 hp) cont/30min and 30/35 kW (40.2/46.9 hp) in braces. On a machine with this much travel the braced motor rating is worth asking about. Controls: Fanuc 31i-B, Siemens 840D.
Full Specifications
| Parameter | Value |
|---|---|
| X Axis Travel | 4,000 mm (157.5 in) |
| Y Axis Travel | 2,300 mm (90.6 in) |
| Z Axis Travel | 1,300 mm (51.2 in) {1,600 mm (63.0 in)} |
| W Axis Travel | 700 mm (27.6 in) |
| Table Size | 1,600 x 4,000 mm (63.0 x 157.5 in) |
| Rotary Table Size | 1,600 x 1,600 mm (63.0 x 63.0 in) |
| Table Indexing | 0.001° (every 90° indexing by locate pin) |
| Table Type | Rotary + Sub table |
| Max Rotary Table Load | 10,000 kg (22,046 lb) {15,000 kg (33,069 lb)} |
| Table Rotation Speed | 1.4 rpm |
| Spindle Diameter | Ø130 mm (5.1 in) |
| Spindle Speed Range | 5 ~ 2,500 rpm |
| Spindle Taper | ISO 50 |
| Spindle Motor Power | 22/26 kW (29.5/34.9 hp) {30/35 kW (40.2/46.9 hp)} (cont/30min) |
| CNC Control | Fanuc 31i-B, Siemens 840D |
Specifications sourced from en.hnkkorea.com — verified 2026-10-04
Strengths & Limitations
Strengths
- 4,000 mm (157.5 in) of X travel with a table of the same length
- Y travel of 2,300 mm (90.6 in) as the stated figure
- 10,000 kg (22,046 lb) on the rotary table, with 15,000 kg (33,069 lb) in braces
- 1,600 x 1,600 mm (63.0 x 63.0 in) rotary section plus sub table
Limitations
- Spindle motor is still 22/26 kW (29.5/34.9 hp) at base rating
- Z travel is the same 1,300 mm (51.2 in) as on the shorter models
- Sub table load is not given
Best For
Frequently Asked Questions
01
X travel is 4,000 mm (157.5 in) and the table is 1,600 x 4,000 mm (63.0 x 157.5 in), so a part of about that length is covered along one face. The rotary section, 1,600 x 1,600 mm (63.0 x 63.0 in), handles shorter parts on four faces.
02
2,300 mm (90.6 in). The HB-130C lists 2,000 mm (78.7 in) with 2,300 mm (90.6 in) in braces, so the CX has the longer travel as its stated value.
03
The maximum load on the rotary table is 10,000 kg (22,046 lb), with 15,000 kg (33,069 lb) printed in braces. HNK gives no load for the sub table.
04
Yes, the HB-150 has a Ø150 mm (5.9 in) spindle with a 37/45 kW (49.6/60.3 hp) motor, and its X travel is given as 3,000 ~ 7,000 mm (118.1 ~ 275.6 in). It is listed with a plain rotary table, not the Rotary + Sub table arrangement.
More from HNK
Other CNC Boring Machines
Burkhardt+Weber MCX 800
Fermat WRF 160/180
You Ji HBM130
Juaristi MP7-RAM
