Hartford HSA-320EA

Q: How much does the Hartford HSA-320EA cost?

The price estimate for the Hartford HSA-320EA is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/hartford-hsa-320ea#price; the request is passed to Hartford or an authorised dealer.

Specs verified 2026-10-04 · hartfordcnc.com Updated 2026-10-04

Image: hartfordcnc.com, Hartford

Key Specifications

Spindle Taper

#50

Tool Capacity

A: 32 (40 / 60) pcs

Table Size

3,000 x 1,800 mm (118.1 x 70.9 in)

Spindle Power

18.5 / 22 opt. 30 / 35 kW (Cont. / 30 min)

max table load

10,000 kg (22,046 lb)

t slots

22 x 250 (11) mm

How much does the Hartford HSA-320EA cost?

Price estimate

Uncertain

We do not have a price for the Hartford HSA-320EA that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.

Overview

A three-metre table only 1,800 mm wide defines the Hartford HSA-320EA. X travel is 3,000 mm (118.1 in), Y travel 2,000 mm (78.7 in), and the 3,000 x 1,800 mm (118.1 x 70.9 in) table takes 10,000 kg (22,046 lb). It is a five-face double-column machine, so side faces are cut with automatic angular heads kept in a switching head compartment.

The proportions suit long, slim work such as machine beds, press bolsters, rails and weldments. Against the HSA-220EA the frame gains a metre of X on the same Y travel and its rating rises from 8,000 kg (17,637 lb) to 10,000 kg. Going wider instead means the HSA-323EA, whose 3,000 x 2,200 mm (118.1 x 86.6 in) table carries the same 10,000 kg.

Hartford builds the line around a slant cross-beam and enlarged columns whose joint with the base is 1,250 mm wide, both aimed at cutting vibration. The Z axis runs on four linear guideways and is balanced by a nitrogen counterweight. All three axes have direct-drive servo motors.

Spindle choices are a #50 gear head at 6,000 rpm (8,000 rpm optional) and a 10,000 rpm hybrid unit, driven by 18.5 / 22 kW or, optionally, 30 / 35 kW. Tool capacity is 32, with 40 and 60 as options, and Z travel is 1,000 mm or 1,200 mm.

Full Specifications

Parameter	Value
Table Size	3,000 x 1,800 mm (118.1 x 70.9 in)
Max Table Load	10,000 kg (22,046 lb)
T-Slots	22 x 250 (11) mm
X Axis Travel	3,000 mm (118.1 in)
Y Axis Travel	2,000 mm (78.7 in)
Z Axis Travel	1,000 (1,200) mm
Spindle Taper	#50
Spindle Speed Gear	6,000 (8,000) rpm
Spindle Speed Hybrid	10,000 rpm
Tool Capacity	A: 32 (40 / 60) pcs
Tool Shank	BT-50 (CAT-50 / DIN50 / BBT-50)
Spindle Motor Power	18.5 / 22 opt. 30 / 35 kW (Cont. / 30 min)

Specifications sourced from hartfordcnc.com — verified 2026-10-04

Strengths & Limitations

Strengths

3,000 mm (118.1 in) of X travel on a narrow 1,800 mm table, for long slim parts
10,000 kg (22,046 lb) table load
Slant beam and columns with a 1,250 mm joint width at the base
Nitrogen counterweight on Z and direct-drive servo motors on three axes

Limitations

Y travel of 2,000 mm (78.7 in) leaves little room beside a part as wide as the table
Same 10,000 kg rating as the wider HSA-323EA, so weight is not what limits the choice between them
Ballscrew support on X is an option below 4 meters

Best For

Machine beds, rails and bolsters up to three metres long Slim weldments that need end faces and sides cut in one setup Five-face work within 10,000 kg (22,046 lb)

Frequently Asked Questions

01 How big is the table of the HSA-320EA?

3,000 x 1,800 mm (118.1 x 70.9 in), with eleven T-slots, and it is rated for 10,000 kg (22,046 lb). Travels are 3,000 mm in X, 2,000 mm (78.7 in) in Y and 1,000 mm in Z, or 1,200 mm in Z as an option.

02 Should I pick the HSA-320EA or the HSA-323EA?

It comes down to part width. The HSA-323EA has a 3,000 x 2,200 mm (118.1 x 86.6 in) table and 2,300 mm (90.6 in) of Y. The HSA-320EA is 1,800 mm wide with 2,000 mm of Y. Both are rated at 10,000 kg and share the same spindle list.

03 What does Hartford say about the structure?

Three things stand out in the maker's description: a new slant beam design to reduce vibration, extra-large columns with a 1,250 mm joint width at the base, and a Z axis on four linear guideways. Hartford also states that the direct-drive servo motors reduce transmission backlash by more than 30%.

04 What tool shanks can the HSA-320EA use?

The table lists BT-50 as standard with CAT-50, DIN50 and BBT-50 in brackets as alternatives. The spindle taper is #50 and the magazine holds 32 tools, with 40 or 60 available.