Anger Machining HS1400T
Key Specifications
Max Spindle
Spindle Taper
Tool Capacity
Table Size
Spindle Power
Accuracy
How much does the Anger Machining HS1400T cost?
Price estimate
We do not have a price for the Anger Machining HS1400T that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
Milling and turning in one clamping is what separates the Anger Machining HS1400T from the rest of the HS series. Its rotary axis runs at 700 rpm, against 70 rpm on the HS1400. The spindle interface is HSK100T, and the table load is 3,200 kg (7,055 lb), the highest in the series.
The envelope is the large HS frame: 1,800 mm (70.9 in) in X, 1,250 mm (49.2 in) in Y and 1,320 mm (52.0 in) in Z, with parts up to ø1,800/1,200 mm. That suits rings, casings and discs that need turned diameters and 5-axis milled features from the same datum. Engine housings and blisks are among the workpieces Anger names for the series.
Spindle data for this model is a single line: 12,000 rpm, 50/76 kW and 200/302 Nm as S1/S6-60% ratings. The HS1400 table shows a wider range reaching 24,000 rpm, so high-speed aluminium work is not what the T version is specified for. With 200 Nm at the S1 rating it is set up for titanium and superalloy cutting at moderate speed.
One wording point to check with Anger: the specification table labels the fast rotary axis as the C-axis at 700 rpm, while the list of key advantages speaks of a B-axis up to 700 rpm for turning operations. The remaining figures match the HS1400: rapids of 50/50/50 m/min, 0.01 mm positioning accuracy, a 20 s chip-to-chip time, 35,000 kg of machine weight and 130 kVA of connected power.
Full Specifications
| Parameter | Value |
|---|---|
| Number of Axes | 5 |
| X Axis Travel | 1,800 mm (70.9 in) |
| Y Axis Travel | 1,250 mm (49.2 in) |
| Z Axis Travel | 1,320 mm (52.0 in) |
| Max Part Size | ø1,800/1,200 mm (ø70.9/47.2 in) |
| Axis Acceleration Xyz | 1.3/2.4/2.3 m/s² |
| Rapid Traverse Xyz | 50/50/50 m/min (1,969/1,969/1,969 ipm) |
| C Axis Speed | 700 rpm |
| Positioning Accuracy | 0.01 mm (0.00039 in), X/Y/Z as per VDI 3441 |
| Repeatability | 0.008 mm (0.00031 in), X/Y/Z as per VDI 3441 |
| Max Spindle Speed | 12,000 rpm |
| Spindle Motor Power | 50/76 kW (S1/S6-60%) |
| Spindle Torque | 200/302 Nm (S1/S6-60%) |
| Spindle Taper | HSK100T |
| Tool Capacity | 40(60/90/120) pcs. |
| Max Tool Diameter (full magazine) | 125 (250) mm |
| Tool Length | 450 mm (17.7 in) |
| Tool Weight | 25 kg (55 lb) |
| Chip to Chip Time | 20 s (at 1,800 rpm) |
| Table Size | ø1,000 - 1,400 mm |
| T-Slot Width | 14-18 mm |
| Max Table Load | 3,200 kg (7,055 lb) |
| Machine Weight | 35,000 kg (77,160 lb) |
| Machine Dimensions | 8,700/6,500/4,291 mm (342.5/255.9/168.9 in) |
| Operating Voltage | 3x380 V |
| Power Requirement | 130 kVA |
| CNC Control | Siemens, Heidenhain |
| Lubrication | KSS |
Specifications sourced from anger-machining.com — verified 2026-10-05
Strengths & Limitations
Strengths
- C-axis speed of 700 rpm for turning operations on a 5-axis horizontal machine
- Table load of 3,200 kg (7,055 lb), above the 2,000 kg of the HS1400
- Spindle rated 200/302 Nm and 50/76 kW (S1/S6-60%)
- HSK100T tool holder, with 40 tools in the listed magazine and 60, 90 or 120 tools in brackets
- Same 1,800 mm, 1,250 mm and 1,320 mm travels as the HS1400
Limitations
- Only 12,000 rpm is listed, where the HS1400 offers up to 24,000 rpm
- Chip-to-chip time of 20 s lengthens cycles with many tool changes
- 35,000 kg machine weight and 130 kVA connected power set the site requirements
- The datasheet calls the turning axis C in the table and B in the feature list, so the kinematics need confirming
Best For
Frequently Asked Questions
01
Yes. Anger lists turning operations among the advantages of the HS series, and this model's table gives a rotational speed of 700 rpm for the C-axis, where the HS700 and HS1400 show 70 rpm. The tool holder is HSK100T.
02
3,200 kg (7,055 lb). The table size is given as ø1,000 - 1,400 mm with T-slots of 14-18 mm, and the maximum part size is ø1,800/1,200 mm. Anger adds that special tables, for example with a threaded hole pattern, are possible.
03
The table lists 12,000 rpm, 50/76 kW and 200/302 Nm, each pair being the S1 and S6-60% rating. Unlike the HS1400 column, which shows ranges across several spindles, this column gives one set of figures.
04
Footprint and height are 8,700/6,500/4,291 mm (L/W/H) and the machine weighs 35,000 kg (77,160 lb). It needs 3x380 V and 130 kVA of connected power. Tools can be up to 450 mm long and weigh up to 25 kg.
05
Siemens and Heidenhain are the two NC controls in the HS series table. Positioning accuracy is stated as 0.01 mm and repeatability as 0.008 mm on X/Y/Z as per VDI 3441, the same as for the other two models of the series.
More from Anger Machining
Other 5-Axis Machining Centers
Hwacheon D2-5AX
AWEA LG-8040
Röders RXP500DSC
Hedelius ACURA 65 EL
DMG Mori DMU 600 P
