Fryer TC-160V
Key Specifications
Max Spindle
Spindle Taper
Tool Capacity
Table Size
Spindle Power
Accuracy
How much does the Fryer TC-160V cost?
Price estimate
We do not have a price for the Fryer TC-160V that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
The Fryer TC-160V has 160 in (4,064 mm) of X travel and is the longest TC-V model that drives its X axis with a ballscrew. The two longer machines switch to rack and pinion, and their accuracy rows loosen with it. For a buyer who needs length and the tighter figure, this is the model to look at first.
The figures in question: positioning accuracy of +/- 0.0002 in (0.0051 mm) and repeatability of +/- 0.0001 in (0.0025 mm) on the TC-160V, against +/- 0.0003 in (0.0076 mm) on the TC-240V. Fryer also lists Heidenhain tape scale feedback for the X axis on models with 160" - 240" of X travel, for work where positions along the bed must hold over the full stroke.
The fixed table measures 160 x 24 in (4,064 x 610 mm) and carries 10,000 lb (4,536 kg). The column travels at 1,000 ipm (25.4 m/min) and cutting feed reaches 600 ipm (15.2 m/min), so long aluminium extrusions and steel rails can be machined in a single clamping at reasonable cycle times. Peak axis thrust is 4,955 lb on X, Y and Z.
Physically the machine is 310 in (7,874 mm) wide in operation and weighs 40,000 lb (18,144 kg). The chip conveyor system for TC machines of 160" - 320" and the full machine guard for 120" - 160" are the matching options. Spindle and changer are the series standard, CAT 40 at 60 - 8,500 rpm with 24 tools.
Full Specifications
| Parameter | Value |
|---|---|
| X Axis Travel | 160 in (4,064 mm) |
| Y Axis Travel | 24 in (610 mm); 32 in (813 mm) with the extended travel option |
| Z Axis Travel | 24 in (610 mm); 32 in (813 mm) with the extended travel option |
| Max Table Load | 10,000 lb (4,536 kg) |
| Table Size | 160 x 24 in (4,064 x 610 mm) |
| T-Slots | 5 / 0.787 in (20 mm) |
| Table Top to Floor | 38 in (965 mm) |
| Spindle Motor Power | 30 hp (22.4 kW) peak; 40 hp (29.8 kW) optional |
| Max Spindle Speed | 60 - 8,500 rpm (6K, 10K, 12K, 15K optional) |
| Spindle Torque | 155 ft-lb (210 Nm) at 350 rpm; 204 ft-lb (277 Nm) with the optional 40 hp motor; 800 ft-lb (1,085 Nm) with the optional 40 hp motor and gearbox |
| Spindle Taper | CAT 40 (CAT 50 optional; BT option) |
| Distance Spindle Nose to Table | 28 - 4 in (711 - 102 mm); 36 - 4 in (914 - 102 mm) with the extended travel option |
| Spindle Center to Column | 24 in (610 mm); 32 in (813 mm) with the extended travel option |
| Tool Capacity | 24 station arm type (40 tool optional) |
| Tool Change Time | 3.0 seconds (4 seconds with 50 taper) |
| Chip to Chip Time | 4.0 seconds (6 seconds with 50 taper) |
| Max Tool Diameter (full magazine) | 3.20 in (81 mm) (5.90 in (150 mm) with 50 taper) |
| Max Tool Diameter (adjacent pockets empty) | 6.25 in (159 mm) (9.50 in (241 mm) with 50 taper) |
| Max Tool Weight | 15.4 lb (7.0 kg) (30 lb (13.6 kg) with 50 taper) |
| Max Tool Length | 13 in (330 mm) (16 in (406 mm) with 50 taper) |
| Positioning Accuracy | +/- 0.0002 in (0.0051 mm) |
| Repeatability | +/- 0.0001 in (0.0025 mm) |
| X Axis Drive Type | Ballscrew |
| Rapid Traverse Xyz | 1,000 ipm (25.4 m/min) X, Y, Z |
| Cutting Feed Rate | 0.001 - 600 ipm (up to 15.2 m/min) |
| Servo Type | AC Digital Brushless |
| Axis Thrust | 4,955 lb (2,248 kgf) X, Y, Z |
| Air Requirement | 90 psi (6.2 bar), 5 cfm (142 L/min) |
| Coolant Capacity | 100 gal (379 L) |
| Coolant Flow | 5 gpm (19 L/min) |
| Power Requirement | 40 A, 400 - 500 VAC, 3 phase (80 or 125 A) |
| Machine Dimensions | 310 x 138 x 118 in (7,874 x 3,505 x 2,997 mm) |
| Machine Weight | 40,000 lb (18,144 kg) |
Specifications sourced from fryermachine.com — verified 2026-10-04
Strengths & Limitations
Strengths
- 160 in (4,064 mm) of X travel on a ballscrew drive
- +/- 0.0002 in (0.0051 mm) positioning accuracy, tighter than the TC-240V
- Heidenhain tape scale feedback for X is available
- 160 x 24 in (4,064 x 610 mm) fixed table for 10,000 lb (4,536 kg)
- 4,955 lb of peak axis thrust
Limitations
- Occupies 310 x 138 in (7,874 x 3,505 mm) and weighs 40,000 lb (18,144 kg)
- Table load is the same 10,000 lb (4,536 kg) as the TC-120V
- Table depth and standard Y travel are 24 in (610 mm)
- Chip conveyor and full guarding are options
Best For
Frequently Asked Questions
01
For accuracy and drive type, if 160 in (4,064 mm) of travel is enough. The TC-160V uses a ballscrew on X with +/- 0.0002 in (0.0051 mm) positioning accuracy. The TC-240V uses rack and pinion on X with +/- 0.0003 in (0.0076 mm) and has 240 in (6,096 mm) of travel.
02
The options sheet lists Heidenhain tape scale feedback with 0.000050" resolution for the X axis on models with 160" - 240" of X travel. The standard machine uses AC digital brushless servos, and Fryer's control uses absolute encoders.
03
Operating dimensions are 310 x 138 x 118 in (7,874 x 3,505 x 2,997 mm) and the weight is 40,000 lb (18,144 kg). The fixed table is 160 x 24 in (4,064 x 610 mm) and 38 in (965 mm) above the floor.
04
Rapids are 1,000 ipm (25.4 m/min) on X, Y and Z and the cutting feed rate goes to 600 ipm (15.2 m/min). The 24 station arm type changer takes 3.0 seconds per tool change and 4.0 seconds chip to chip with the 40 taper spindle.
More from Fryer
Other Vertical Machining Centers (VMC)
YCM TV116B-APC
Hardinge Bridgeport V710
Johnford JET-40
Sugino SC-V30a
Brother SPEEDIO S1000X1
