Feeler SVW-4222
Key Specifications
Max Spindle
Spindle Taper
Tool Capacity
x axis travel
z axis travel
table length
How much does the Feeler SVW-4222 cost?
Price estimate
We do not have a price for the Feeler SVW-4222 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
Feeler rates the SVW-4222 at 15 ton, the highest table load in the SVW series, on a table 4,000 mm (157.5 in) long and 1,800 mm (70.9 in) wide. X travel is 4,200 mm (165.4 in).
Three models share that 15 ton figure, all with four-metre tables, and this is the narrowest of them. For a shop the practical reading is that the load rating stops growing with width at this point: the SVW-4223 and SVW-4225 differ in width, not in what the table carries.
Fifteen tonnes over this area suits large steel weldments, press components, big mould bases and cast iron machine members. Workpieces like these take long roughing passes, and the series spindle is built for them: a fully geared internal transmission with a two-speed gearbox, 6,000 rpm on a BT/DIN/CAT 50 taper. The bracketed 8,000-15,000 rpm and #40 alternative trades that torque for speed.
Rapids are 12 m/min (472 ipm) on X and 15 m/min (591 ipm) on Y and Z. Z travel is 800 mm (31.5 in), with 1,000 mm (39.4 in) in brackets; for tall parts or long attachment heads the longer stroke is worth specifying. Tool capacity is 24, or 32, 40 or 60.
Full Specifications
| Parameter | Value |
|---|---|
| X Axis Travel | 4,200 mm (165.4 in) |
| Z Axis Travel | 800 (1,000) mm (31.5 (39.4) in) |
| Table Length | 4,000 mm (157.5 in) |
| Table Width | 1,800 mm (70.9 in) |
| Max Table Load | 15 ton |
| Max Spindle Speed | 6,000 (8,000-15,000) rpm |
| Spindle Taper | BT/DIN/CAT 50 (#40) |
| Rapid Traverse X | 12 m/min (472 ipm) |
| Rapid Traverse Y | 15 m/min (591 ipm) |
| Rapid Traverse Z | 15 m/min (591 ipm) |
| Tool Capacity | 24 (32/40/60) |
Specifications sourced from feeler.com — verified 2026-10-04
Strengths & Limitations
Strengths
- 15 ton table load, the highest in the SVW series
- 4,000 × 1,800 mm (157.5 × 70.9 in) table
- Geared two-speed spindle built for long roughing passes
- Z travel option of 1,000 mm (39.4 in) for tall parts
Limitations
- X rapid of 12 m/min (472 ipm) over a 4,200 mm stroke
- Standard Z travel is 800 mm (31.5 in)
- Spindle power and torque are not published, nor is Y travel on this page
Best For
Frequently Asked Questions
01
15 ton. The same figure is listed for the SVW-4223 and SVW-4225, and it is the highest in the series. The table is 4,000 mm long and 1,800 mm wide.
02
The SVW-4217 has a 1,400 mm wide table rated at 14 ton. The SVW-4222 has an 1,800 mm wide table rated at 15 ton. Both have 4,200 mm of X travel, a 4,000 mm table length and the same rapids.
03
It depends on part height and on attachment heads. The listed Z travel is 800 mm (31.5 in) and the bracketed alternative 1,000 mm (39.4 in). Daylight under the spindle is not in the series table, so check it with the tallest part and longest tool.
04
12 m/min (472 ipm) on X and 15 m/min (591 ipm) on Y and Z. Cutting feed rates and axis thrust are not published on the series page.
More from Feeler
Other Vertical Machining Centers (VMC)
Sharp KMA-4H-CNC
DN Solutions VM 960 L
YCM DCV2012B
Ecoca VB-2000
TRAK DPM RX2
