Feeler FTC-350SLMC/SXLMC
Key Specifications
Max Spindle
Max Turn Length
chuck size
max turning diameter
bar capacity
x axis travel
How much does the Feeler FTC-350SLMC/SXLMC cost?
Price estimate
We do not have a price for the Feeler FTC-350SLMC/SXLMC that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
Sub-spindle and driven tools together are what the Feeler FTC-350SLMC/SXLMC adds to the FTC-350 line. It comes in two lengths, with 510 mm (20.1 in) or 850 mm (33.5 in) of turning length, and its turret is listed as 12-BMT 55.
A part can therefore be turned and milled at the main spindle, handed to the second spindle, and turned and milled again on its cut-off side. For bar parts with cross holes or flats on both ends that removes a second machine and a second handling. The main chuck is 8 in (203 mm) on an A2-6 nose at 4,500 rpm; the second is 6 in (152 mm) on A2-5 at 6,000 rpm. Bar capacity is ø52 mm and ø45 mm in the same order.
Swing is the limit to watch. Maximum turning diameter is ø270 mm (ø10.6 in). That is more than the ø235 mm of the single-spindle FTC-350MC/LMC/XLMC and less than the ø330 mm of the turning-only FTC-350S/LS/XLS, so this is a machine for bar and compact chucked parts rather than discs.
Z travel is 550 or 890 mm and the E axis, which carries the second spindle, travels 660 or 975 mm. X is printed as 180+10 mm. There is no Y-axis figure and no tailstock in this column. Driven-tool speed and power are not published on the series page.
Full Specifications
| Parameter | Value |
|---|---|
| Chuck Size | 8/6 in (203/152 mm) |
| Max Turning Diameter | ø270 mm (ø10.6 in) |
| Max Turning Length | 510/850 mm (20.1/33.5 in) |
| Bar Capacity | ø52/ø45 mm (ø2.0/ø1.8 in) |
| X Axis Travel | 180+10 mm (7.1+0.4 in) |
| Z Axis Travel | 550/890 mm (21.7/35.0 in) |
| E Axis Travel | 660/975 mm (26.0/38.4 in) |
| Max Spindle Speed | 4,500/6,000 rpm |
| Spindle Nose | A2-6/A2-5 |
| Spindle Bore | ø62/ø56 mm (ø2.4/ø2.2 in) |
| Turret Stations | 12-BMT 55 |
Specifications sourced from feeler.com — verified 2026-10-04
Strengths & Limitations
Strengths
- Milling and turning on both ends of the part with a 12-BMT 55 turret and a second spindle
- Main spindle 4,500 rpm on A2-6; second spindle 6,000 rpm on A2-5
- 660 or 975 mm of E-axis travel for part transfer
- ø270 mm (ø10.6 in) turning diameter, above the ø235 mm of the FTC-350MC/LMC/XLMC
Limitations
- No Y axis: the FTC-350SLY is the column with Y travel
- No tailstock is listed for either length
- Only two lengths; there is no short-bed version as on the FTC-350S/LS/XLS
- Second-spindle bar capacity is ø45 mm (ø1.8 in)
Best For
Frequently Asked Questions
01
Two. Maximum turning length is 510/850 mm (20.1/33.5 in), Z travel 550/890 mm (21.7/35.0 in) and E-axis travel 660/975 mm (26.0/38.4 in) for the SLMC and SXLMC.
02
The tool-station row reads 12-BMT 55: twelve stations with a BMT 55 interface. The table gives no driven-tool speed, power or torque, so those have to come from the maker's quotation.
03
The FTC-350SLY adds 80 (±40) mm of Y travel and is listed in one length with 515 mm of turning length and a ø350 mm turning diameter. The FTC-350SLMC/SXLMC has no Y axis, two lengths and ø270 mm.
04
8 in (203 mm) on the main spindle and 6 in (152 mm) on the second, printed as 8/6 in. The matching bores are ø62/ø56 mm and the bar capacities ø52/ø45 mm (ø2.0/ø1.8 in).
More from Feeler
Other CNC Lathes / Turning Centers
Citizen Miyano ABX-80THY
Sharp STA-38
Chevalier FVL-2000VTC+C
Honor Seiki VL-250CM
