Dener XL 30175
Image: en.dener.com, Dener
Key Specifications
bending length
bending capacity
approach speed
bending speed
return speed
stroke
How much does the Dener XL 30175 cost?
Price estimate
We do not have a price for the Dener XL 30175 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
With the Dener XL 30175 the three-metre Smart XL press brake reaches the large frame: 175 ton over 3,020 mm (118.9 in), a 350 mm stroke and 600 mm of daylight. Those last two are the figures Dener advertises for the series as a whole, and this is the smallest 3 m model that has them in its table.
600 mm of daylight matters for deep work. A tall gooseneck punch plus a raised die still leaves room to get a formed box off the tooling, which the 530 mm of the XL 30100 does not always allow.
The hydraulic system is a class up as well. The main motor is 22 kW (29.5 hp) and the oil tank holds 300 lt, the same power pack that serves the XL 30220. Speeds are 150 mm/sec approach, 10 mm/sec bending and 130 mm/sec return.
The frame weighs 11,600 kg (25,573 lb) and stands 3,030 mm at its highest point, so check door height and crane capacity before delivery. Throat depth is 450 mm and the side frames are 2,555 mm apart. As on every XL, the standard backgauge has X and R axes and the lower table crowning is set by hand; a motorized crowning system is optional.
Full Specifications
| Parameter | Value |
|---|---|
| Bending Length | 3,020 mm (118.9 in) |
| Bending Capacity | 175 ton |
| Approach Speed | 150 mm/sec |
| Bending Speed | 10 mm/sec |
| Return Speed | 130 mm/sec |
| Stroke | 350 mm (13.8 in) |
| Daylight | 600 mm (23.6 in) |
| Throat Depth | 450 mm (17.7 in) |
| Distance Between Side Frames | 2,555 mm (100.6 in) |
| Machine Length | 3,745 mm (147.4 in) |
| Machine Width | 2,280 mm (89.8 in) |
| Width Without Front Support | 1,720 mm (67.7 in) |
| Maximum Height | 3,030 mm (119.3 in) |
| Main Motor Power | 22 kW (29.5 hp) |
| Oil Tank | 300 lt |
| Machine Weight | 11,600 kg (25,573 lb) |
Specifications sourced from en.dener.com — verified 2026-10-05
Strengths & Limitations
Strengths
- 175 ton across 3,020 mm for medium plate at full length
- 350 mm stroke and 600 mm daylight for deep boxes and tall tools
- 22 kW (29.5 hp) main motor and a 300 lt oil tank
- 450 mm throat with 2,555 mm between the side frames
Limitations
- Weighs 11,600 kg (25,573 lb), against 9,600 kg for the XL 30135
- Maximum height of 3,030 mm can be a problem under low roofs
- Approach slows to 150 mm/sec
Best For
Frequently Asked Questions
01
The XL 30135 has 135 ton, a 320 mm stroke, 550 mm daylight and weighs 9,600 kg; this model has 175 ton, a 350 mm stroke, 600 mm daylight, a 22 kW motor with a 300 lt tank, and weighs 11,600 kg.
02
The ram approaches at 150 mm/sec, bends at 10 mm/sec and returns at 130 mm/sec according to the specification table.
03
The table gives a maximum height of 3,030 mm, a length of 3,745 mm and a width without front supports of 1,720 mm. Ask Dener for the transport height, which the page does not state.
04
A hydraulic oil cooling system is listed as optional equipment for the XL series, as is an electrical cabinet cooling system. Neither is part of the standard machine.
