Dener XL 30100
Image: en.dener.com, Dener
Key Specifications
bending length
bending capacity
approach speed
bending speed
return speed
stroke
How much does the Dener XL 30100 cost?
Price estimate
We do not have a price for the Dener XL 30100 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
A three-metre bed with 100 ton behind it makes the Dener XL 30100 the entry point to full-sheet bending in the Smart XL hydraulic series. Bending length is 3,020 mm (118.9 in) and the side frames are 2,555 mm apart.
Who is it for? Shops whose work is mostly thin and medium sheet at full length. The force is the same as on the shorter XL 26100, so the tonnage available per metre is lower here. Dener offers the same bed with more force as the XL 30135, the XL 30175 and the XL 30220, and the choice between the four comes down to material thickness.
In exchange for the modest force, this is the lightest and quickest of the 3,020 mm machines. It weighs 8,700 kg (19,180 lb), returns at 150 mm/sec and approaches at 160 mm/sec. The main motor is 11 kW (14.8 hp) and the tank holds 190 lt.
Stroke is 300 mm, daylight 530 mm and throat depth 450 mm. An X, R backgauge, front support arms, a CE-certified light curtain and the ESA 640 2D control are part of the standard machine. The frame is St-44 monoblock steel.
Full Specifications
| Parameter | Value |
|---|---|
| Bending Length | 3,020 mm (118.9 in) |
| Bending Capacity | 100 ton |
| Approach Speed | 160 mm/sec |
| Bending Speed | 10 mm/sec |
| Return Speed | 150 mm/sec |
| Stroke | 300 mm (11.8 in) |
| Daylight | 530 mm (20.9 in) |
| Throat Depth | 450 mm (17.7 in) |
| Distance Between Side Frames | 2,555 mm (100.6 in) |
| Machine Length | 3,725 mm (146.7 in) |
| Machine Width | 2,260 mm (89 in) |
| Width Without Front Support | 1,690 mm (66.5 in) |
| Maximum Height | 2,780 mm (109.4 in) |
| Main Motor Power | 11 kW (14.8 hp) |
| Oil Tank | 190 lt |
| Machine Weight | 8,700 kg (19,180 lb) |
Specifications sourced from en.dener.com — verified 2026-10-05
Strengths & Limitations
Strengths
- Full 3,020 mm bending length at 8,700 kg (19,180 lb), the lightest 3 m model in the XL table
- 150 mm/sec return, faster than the higher-tonnage 3 m models
- 11 kW (14.8 hp) main motor keeps the electrical demand low
- 2,555 mm between the side frames
Limitations
- 100 ton over 3,020 mm limits thickness on full-length bends
- Daylight of 530 mm is the smallest among the 3 m XL models
- Motorized crowning and Z-axis backgauge fingers are optional
Best For
Frequently Asked Questions
01
Both bend 3,020 mm. The XL 30135 has 135 ton, a 320 mm stroke, 550 mm daylight and a 15 kW motor, and it weighs 9,600 kg. The XL 30100 has 100 ton, a 300 mm stroke and 530 mm daylight, and returns faster at 150 mm/sec.
02
Approach speed is 160 mm/sec, bending speed is 10 mm/sec and return speed is 150 mm/sec. The stroke those speeds cover is 300 mm.
03
Yes. The distance between the side frames is 2,555 mm. A part wider than that can only enter as far as the 450 mm throat depth allows.
04
Standard: X, R backgauge axes, ESA 640 2D control, manual crowning, European-style sectional punch and die, front support arms and a light curtain. Optional: Delem or ESA 875 W controls, multi-axis backgauges, a sheet follower and motorized crowning.
