Dener DD-M-13030
Key Specifications
bending length
bending capacity
stroke
distance between tables
approach speed
bending speed
How much does the Dener DD-M-13030 cost?
Price estimate
We do not have a price for the Dener DD-M-13030 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
The Dener DD-M-13030 adds 30 percent more force to Dener's three-metre servo electric press brake: 130 ton across 3,050 mm (120.1 in). It is the middle one of three models on that bed.
Two rows in the table show how it was done. Motor power goes to 12.5 kW (16.8 hp), the only DD-M with that rating, and the weight climbs to 8,500 kg (18,739 lb). The heavier structure is what lets an electric brake hold angle accuracy at higher load, since Dener's O-frame carries the force through both tables.
Somewhat unexpectedly, the ram is quicker than on the DD-M-10030. Approach and return are 85 mm/sec, and bending is 20 mm/sec.
Outside dimensions are unchanged from the lighter three-metre model: 4,220 mm long, 1,960 mm deep, 2,500 mm high. Stroke and table distance are the series values of 300 mm and 660 mm.
For material that needs crowning at 130 ton, note that Dener lists manual or automatic crowning under optional equipment. The standard control is the ESA 875 W 3D unit, which calculates the bend sequence from STEP and DXF files.
Full Specifications
| Parameter | Value |
|---|---|
| Bending Length | 3,050 mm (120.1 in) |
| Bending Capacity | 130 ton |
| Stroke | 300 mm (11.8 in) |
| Distance Between Tables | 660 mm (26 in) |
| Approach Speed | 85 mm/sec |
| Bending Speed | 20 mm/sec |
| Return Speed | 85 mm/sec |
| Motor Power | 12.5 kW (16.8 hp) |
| Machine Weight | 8,500 kg (18,739 lb) |
| Machine Length | 4,220 mm (166.1 in) |
| Machine Depth | 1,960 mm (77.2 in) |
| Machine Height | 2,500 mm (98.4 in) |
| Maximum Height | 2,900 mm (114.2 in) |
Specifications sourced from en.dener.com — verified 2026-10-05
Strengths & Limitations
Strengths
- 130 ton on a 3,050 mm electric brake
- 85 mm/sec approach and return
- Same 4,220 mm length and 1,960 mm depth as the lighter three-metre model
- Bend sequence calculated automatically from STEP and DXF files
Limitations
- 8,500 kg (18,739 lb) is a clear step up in weight
- Crowning is optional at a force where it is usually needed
- Stroke stays at 300 mm, as on smaller sizes
Best For
Frequently Asked Questions
01
A maximum tonnage of 130 ton over 3,050 mm (120.1 in), with a 300 mm stroke, 660 mm between tables and a 12.5 kW (16.8 hp) motor.
02
In ram travel, yes. The DD-M-10030 approaches and returns at 75 mm/sec; the DD-M-13030 does so at 85 mm/sec. Both bend at 20 mm/sec.
03
It weighs 8,500 kg (18,739 lb). Overall length is 4,220 mm, depth 1,960 mm, height 2,500 mm and maximum height 2,900 mm.
04
Dener states automatic bend sequence calculation for STEP and DXF file formats. The standard unit is an ESA 875 W 21-inch 3D control; Delem DA 66T and DA 69T are optional.
