Dener XL 30135
Image: en.dener.com, Dener
Key Specifications
bending length
bending capacity
approach speed
bending speed
return speed
stroke
How much does the Dener XL 30135 cost?
Price estimate
We do not have a price for the Dener XL 30135 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
The Dener XL 30135 puts 135 ton on the 3,020 mm (118.9 in) bed of the Smart XL hydraulic press brake line. It is the second of four force levels Dener builds at this length.
Moving up from the XL 30100 changes more than the cylinders. The main motor grows to 15 kW (20.1 hp), the stroke to 320 mm and the daylight to 550 mm, each a small step over the XL 30100. The oil tank stays at 190 lt. Weight is 9,600 kg (21,164 lb).
There is one figure that goes the other way. Return speed is 130 mm/sec, so the ram comes back more slowly than on the XL 30100, while approach speed holds at 160 mm/sec. On short-stroke work the difference is small.
The throat is 450 mm deep with 2,555 mm between the side frames, as on every 3,020 mm XL. Standard equipment follows the series: X, R backgauge, ESA 640 2D control, manual lower table crowning, Hawe hydraulics. Buyers who expect to bend long parts near full tonnage should price the motorized crowning option, since the manual system has to be reset by hand when the job changes.
Full Specifications
| Parameter | Value |
|---|---|
| Bending Length | 3,020 mm (118.9 in) |
| Bending Capacity | 135 ton |
| Approach Speed | 160 mm/sec |
| Bending Speed | 10 mm/sec |
| Return Speed | 130 mm/sec |
| Stroke | 320 mm (12.6 in) |
| Daylight | 550 mm (21.7 in) |
| Throat Depth | 450 mm (17.7 in) |
| Distance Between Side Frames | 2,555 mm (100.6 in) |
| Machine Length | 3,745 mm (147.4 in) |
| Machine Width | 2,280 mm (89.8 in) |
| Width Without Front Support | 1,720 mm (67.7 in) |
| Maximum Height | 2,835 mm (111.6 in) |
| Main Motor Power | 15 kW (20.1 hp) |
| Oil Tank | 190 lt |
| Machine Weight | 9,600 kg (21,164 lb) |
Specifications sourced from en.dener.com — verified 2026-10-05
Strengths & Limitations
Strengths
- 135 ton over 3,020 mm covers a wider thickness range than the XL 30100
- 320 mm stroke and 550 mm daylight
- Approach speed stays at 160 mm/sec
- 15 kW (20.1 hp) main motor on the same 190 lt tank
Limitations
- Return speed drops to 130 mm/sec
- Stroke and daylight are still below the 350 mm and 600 mm of the XL 30175
- Manual crowning as standard
Best For
Frequently Asked Questions
01
135 ton over a bending length of 3,020 mm (118.9 in), with 2,555 mm between the side frames and a 450 mm throat depth.
02
On the return stroke, yes: 130 mm/sec against the 150 mm/sec of the XL 30100. Approach speed (160 mm/sec) and bending speed (10 mm/sec) are the same on both.
03
A manual lower table crowning system is standard equipment. A motorized crowning system is on the list of options for the XL series.
04
It weighs 9,600 kg (21,164 lb). Length is 3,745 mm, width 2,280 mm with front supports or 1,720 mm without, and the maximum height is 2,835 mm.
