LVD PPEB 220/42 Plus
Image: lvdgroup.com, LVD
Key Specifications
pressing force
hydraulic pressure
bending length
width between columns
ram stroke
open height
How much does the LVD PPEB 220/42 Plus cost?
Price estimate
We do not have a price for the LVD PPEB 220/42 Plus that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
Wide frame and tall opening in one machine: the LVD PPEB 220/42 Plus has 3,820 mm (150.4 in) between the uprights and 570 mm (22.4 in) from table to ram, with 2,200 kN on a 4,270 mm (168.1 in) working length.
LVD lists it at 18,700 kg (41,226 lb), the heaviest PPEB of this force below five metres. The table is 200 mm (7.9 in) wide and takes 2,500 kN/m. Stroke is 300 mm (11.8 in). Working height is 1,000 mm (39.4 in).
The parts that need both dimensions are large fabricated shells. Take a deep rectangular tank, formed as a four-sided pan about three and a half metres long. It has to pass between the uprights, because a pan cannot enter a gap. It has to swing up inside the opening as its long sides are folded. And when the last side is done, the punch has to lift clear of walls several hundred millimetres high. A standard-height, standard-width brake fails on at least one of the three.
Because the PPEB is configurable, the machine can be finished for that kind of work: a multi-axis backgauge for gauging off formed edges, sheet followers to carry the rising panel, hydraulic clamping for tall tools.
The drive matches the other 2,200 kN models: 37 kW, 350 L, 285 bar, with 120 mm/s approach, 21 mm/s working and 200 mm/s return.
Full Specifications
| Parameter | Value |
|---|---|
| Pressing Force | 2,200 kN |
| Hydraulic Pressure | 285 bar |
| Bending Length | 4,270 mm (168.1 in) |
| Width Between Columns | 3,820 mm (150.4 in) |
| Ram Stroke | 300 mm (11.8 in) |
| Open Height | 570 mm (22.4 in) |
| Throat Depth | 400 mm (15.7 in) |
| Table Width | 200 mm (7.9 in) |
| Max Table Load | 2,500 kN/m |
| Working Height | 1,000 mm (39.4 in) |
| Approach Speed | 120 mm/s |
| Bending Speed | 21 mm/s |
| Return Speed | 200 mm/s |
| Motor Power | 37 kW |
| Machine Weight | 18,700 kg (41,226 lb) |
| Oil Tank Capacity | 350 L |
Specifications sourced from lvdgroup.com — verified 2026-10-05
Strengths & Limitations
Strengths
- 3,820 mm (150.4 in) clear width with 570 mm (22.4 in) of open height
- 300 mm (11.8 in) stroke lifts the punch clear of deep walls
- 2,500 kN/m table, 200 mm (7.9 in) wide
- Configurable for shell work: backgauge, followers, clamping
- 21 mm/s working speed on a 37 kW motor
Limitations
- 18,700 kg (41,226 lb) of machine
- Working height of 1,000 mm (39.4 in)
- Approach of 120 mm/s over a long stroke
- Floor-level installation to be confirmed at this length
Best For
Frequently Asked Questions
01
The PPEB 220/42 has a 200 mm stroke, 400 mm of open height and a 120 mm table at 2,000 kN/m, and weighs 17,000 kg. The Plus has a 300 mm stroke, 570 mm, a 200 mm table at 2,500 kN/m and weighs 18,700 kg.
02
LVD gives the opening, 570 mm (22.4 in), and the stroke, 300 mm (11.8 in), not a part depth. The limit depends on the punch and die heights. Further increases in 100 mm steps are offered as an option.
03
The Easy-Form 220/42 Plus lists the same force, bed, frame opening, stroke, opening and 18,700 kg, with LVD's laser angle system as standard equipment.
04
2,500 kN/m on a 200 mm (7.9 in) wide table. With 2,200 kN of total force, that covers the full tonnage applied over a short die.
More from LVD
Other CNC Press Brakes
Accurl EURO-PRO B 50320
Trumpf TruBend Center 7000
Accurl EURO GENIUS B40400H
Salvagnini P2lean II
Yawei PBH(A)-500/5100
