Dener XL 36220
Image: en.dener.com, Dener
Key Specifications
bending length
bending capacity
approach speed
bending speed
return speed
stroke
How much does the Dener XL 36220 cost?
Price estimate
We do not have a price for the Dener XL 36220 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
Dener builds its 3,650 mm Smart XL bed at two force levels, and the Dener XL 36220 is the stronger: a 220 ton hydraulic press brake with 3,100 mm of clear space between the side frames.
Compared with the XL 36175, the specification table changes in three rows only. Capacity rises to 220 ton. Approach speed is 140 mm/sec. Weight goes up to 12,700 kg (27,998 lb). Stroke (350 mm), daylight (600 mm), throat depth (450 mm), main motor (22 kW) and oil tank (300 lt) are the same.
Why would a shop pick the longer bed at this force? Mostly for panels cut from three-metre stock that need bending on all four sides. The sheet can pass between the frames in either orientation, and 220 ton leaves headroom when the material is stainless or the die is narrow.
Overall length is 4,290 mm. The standard machine has manual crowning and an X, R backgauge; on a 3,650 mm bed running near full tonnage, the optional motorized crowning and a backgauge with Z1 and Z2 fingers are the first upgrades to consider.
Full Specifications
| Parameter | Value |
|---|---|
| Bending Length | 3,650 mm (143.7 in) |
| Bending Capacity | 220 ton |
| Approach Speed | 140 mm/sec |
| Bending Speed | 10 mm/sec |
| Return Speed | 130 mm/sec |
| Stroke | 350 mm (13.8 in) |
| Daylight | 600 mm (23.6 in) |
| Throat Depth | 450 mm (17.7 in) |
| Distance Between Side Frames | 3,100 mm (122 in) |
| Machine Length | 4,290 mm (168.9 in) |
| Machine Width | 2,290 mm (90.2 in) |
| Width Without Front Support | 1,730 mm (68.1 in) |
| Maximum Height | 3,055 mm (120.3 in) |
| Main Motor Power | 22 kW (29.5 hp) |
| Oil Tank | 300 lt |
| Machine Weight | 12,700 kg (27,998 lb) |
Specifications sourced from en.dener.com — verified 2026-10-05
Strengths & Limitations
Strengths
- 220 ton on a 3,650 mm bed
- 3,100 mm between the side frames
- At 12,700 kg, weighs little more than the XL 36175 at 12,500 kg
- 600 mm daylight with a 350 mm stroke
Limitations
- Approach speed of 140 mm/sec
- Standard crowning is manual on a long, high-force bed
- Needs 4,290 mm of floor length
Best For
Frequently Asked Questions
01
Three table rows: 220 ton instead of 175 ton, a 140 mm/sec approach instead of 150 mm/sec, and a weight of 12,700 kg instead of the 12,500 kg of the XL 36175.
02
Daylight is 600 mm, stroke is 350 mm and throat depth is 450 mm. The side frames are 3,100 mm apart, on a bending length of 3,650 mm.
03
A 22 kW (29.5 hp) main motor with a 300 lt oil tank. Dener states that the series uses Hawe hydraulic systems.
04
Return speed is 130 mm/sec and bending speed is 10 mm/sec. The approach speed is 140 mm/sec over a stroke of 350 mm.
