Dener XL 1560
Image: en.dener.com, Dener
Key Specifications
bending length
bending capacity
approach speed
bending speed
return speed
stroke
How much does the Dener XL 1560 cost?
Price estimate
We do not have a price for the Dener XL 1560 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
The Dener XL 1560 is the shortest hydraulic press brake in the Smart XL table: 60 ton of bending capacity over a 1,550 mm (61 in) bending length. It is a machine for small parts, and the rest of the table follows from that. The frames stand 1,250 mm apart, the main motor is 7.5 kW (10.1 hp), the oil tank holds 100 lt and the whole machine weighs 4,300 kg (9,480 lb).
Speed is where the small frame pays back. The ram approaches at 180 mm/sec and returns at 160 mm/sec, the fastest pair in the XL series and shared only with the XL 2060. Bending speed is 10 mm/sec.
The opening is the limit to plan around. Stroke is 220 mm and daylight 410 mm, with a throat depth of 400 mm. Dener's equipment list for the series mentions a throat depth of 450 mm and a cylinder stroke of 350 mm, but those figures belong to the larger frames; for this size the table values apply. Tall punches and deep boxes need checking against 410 mm before the tooling is ordered.
Standard equipment is an X, R backgauge, a 15-inch ESA 640 2D control, manual crowning of the lower table and European-style sectional tooling. Delem controls, backgauges with Z1 and Z2 fingers and motorized crowning are options.
Full Specifications
| Parameter | Value |
|---|---|
| Bending Length | 1,550 mm (61 in) |
| Bending Capacity | 60 ton |
| Approach Speed | 180 mm/sec |
| Bending Speed | 10 mm/sec |
| Return Speed | 160 mm/sec |
| Stroke | 220 mm (8.7 in) |
| Daylight | 410 mm (16.1 in) |
| Throat Depth | 400 mm (15.7 in) |
| Distance Between Side Frames | 1,250 mm (49.2 in) |
| Machine Length | 2,445 mm (96.3 in) |
| Machine Width | 2,200 mm (86.6 in) |
| Width Without Front Support | 1,635 mm (64.4 in) |
| Maximum Height | 2,390 mm (94.1 in) |
| Main Motor Power | 7.5 kW (10.1 hp) |
| Oil Tank | 100 lt |
| Machine Weight | 4,300 kg (9,480 lb) |
Specifications sourced from en.dener.com — verified 2026-10-05
Strengths & Limitations
Strengths
- Fastest ram in the XL table: 180 mm/sec approach and 160 mm/sec return
- Light and compact at 4,300 kg (9,480 lb) and 2,445 mm overall length
- Small services: a 7.5 kW (10.1 hp) main motor and a 100 lt oil tank
- X, R backgauge and an ESA 640 2D control are standard equipment
Limitations
- Daylight of 410 mm and a 220 mm stroke are the smallest opening in the series
- Only 1,250 mm between the side frames; wider parts must stay inside the 400 mm throat
- Crowning is manual as standard, and Z1/Z2 backgauge axes are optional
Best For
Frequently Asked Questions
01
It applies 60 ton over a bending length of 1,550 mm (61 in). The distance between the side frames is 1,250 mm, so a part wider than that has to fit within the 400 mm throat depth.
02
Approach speed is 180 mm/sec, bending speed 10 mm/sec and return speed 160 mm/sec. With only 220 mm of stroke to cover, the ram spends little of each cycle travelling.
03
Dener lists a 15-inch ESA 640 2D control unit as standard for the series. An ESA 875 W 3D control and Delem 66T or 69T controls are listed as optional equipment.
04
The table gives a length of 2,445 mm, a width of 2,200 mm with the front supports (1,635 mm without them) and a maximum height of 2,390 mm. The machine weighs 4,300 kg (9,480 lb).
