Dener XL 60220
Image: en.dener.com, Dener
Key Specifications
bending length
bending capacity
approach speed
bending speed
return speed
stroke
How much does the Dener XL 60220 cost?
Price estimate
We do not have a price for the Dener XL 60220 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
Six metres at 220 ton: the Dener XL 60220 opens the long-bed end of the Smart XL hydraulic press brake range. Bending length is 6,050 mm (238.2 in) and the side frames are 5,100 mm apart.
The force is modest for the length, and that defines the machine. It is built for long sections in thin and medium sheet, such as lighting poles, crane-rail covers, truck body rails and architectural profiles, where the alternative is welding two shorter bends together.
Dener keeps the mid-size hydraulic unit here. The main motor is 22 kW (29.5 hp) and the tank 300 lt, the same as on the XL 40220, and the opening is also the same: a 350 mm stroke and 600 mm daylight with a 450 mm throat. The ram approaches and returns at 100 mm/sec.
A six-metre bed deflects more than a short one under the same load. The standard crowning is a manual system on the lower table, and the motorized option deserves a serious look at this length. So does the sheet follower: a long, thin part folding upward is awkward for two operators and unsafe for one.
The machine is 6,825 mm long and weighs 19,000 kg (41,887 lb).
Full Specifications
| Parameter | Value |
|---|---|
| Bending Length | 6,050 mm (238.2 in) |
| Bending Capacity | 220 ton |
| Approach Speed | 100 mm/sec |
| Bending Speed | 10 mm/sec |
| Return Speed | 100 mm/sec |
| Stroke | 350 mm (13.8 in) |
| Daylight | 600 mm (23.6 in) |
| Throat Depth | 450 mm (17.7 in) |
| Distance Between Side Frames | 5,100 mm (200.8 in) |
| Machine Length | 6,825 mm (268.7 in) |
| Machine Width | 2,300 mm (90.6 in) |
| Width Without Front Support | 1,760 mm (69.3 in) |
| Maximum Height | 3,010 mm (118.5 in) |
| Main Motor Power | 22 kW (29.5 hp) |
| Oil Tank | 300 lt |
| Machine Weight | 19,000 kg (41,887 lb) |
Specifications sourced from en.dener.com — verified 2026-10-05
Strengths & Limitations
Strengths
- 6,050 mm bending length with 5,100 mm between the side frames
- Lightest six-metre XL at 19,000 kg (41,887 lb)
- 100 mm/sec approach and return, the fastest of the six-metre models
- Runs on a 22 kW (29.5 hp) main motor
Limitations
- 220 ton over 6,050 mm is a thin-to-medium sheet rating
- Manual crowning as standard on a six-metre table
- 450 mm throat and 600 mm daylight, less than the heaviest six-metre frames
Best For
Frequently Asked Questions
01
6,050 mm (238.2 in), with a bending capacity of 220 ton. There are 5,100 mm between the side frames and the throat depth is 450 mm.
02
100 mm/sec for approach, 10 mm/sec for bending and 100 mm/sec for return. The XL 60320 on the same bed runs at 80 mm/sec outside the bend.
03
Overall length is 6,825 mm, width 2,300 mm with the front supports and 1,760 mm without, and maximum height 3,010 mm. It weighs 19,000 kg (41,887 lb).
04
Dener lists a motorized crowning system and a sheet follower system as optional equipment. The first compensates table deflection without manual resetting; the second supports the sheet as it rises during the bend.
