AWEA LP-6021YF
Image: awea.com, AWEA
Key Specifications
Max Spindle
Spindle Taper
Tool Capacity
Table Size
Spindle Power
x axis travel
How much does the AWEA LP-6021YF cost?
Price estimate
We do not have a price for the AWEA LP-6021YF that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
The AWEA LP-6021YF is the 6,000 mm (236.2 in) end of the LP-21YF group and the one built for weight. Its 6,020 x 2,010 mm (237.0 x 79.1 in) table is rated for 18,000 kg (39,683 lb), and the machine itself weighs 45,000 kg (99,206 lb).
Read the cutting feed row before anything else. AWEA gives 1 ~ 5,000 mm/min (0.04 ~ 197 ipm), against 1 ~ 8,000 mm/min (0.04 ~ 315 ipm) on the LP-5021YF. X rapid is 10,000 mm/min (394 ipm). A program built around fast finishing passes will be capped by that feed. Heavy roughing at low feed won't notice it.
Accuracy over 6,000 mm is the widest of the group as well: P ≤ 0.050 mm over full travel and Ps ≤ 0.035 mm repeatability under VDI. If the work is shorter and the tolerance tighter, the LP-3021YF is listed at P ≤ 0.025 mm.
The spindle side is unchanged from the smaller sizes. 6,000 rpm is listed with a 22 / 26 kW (30 / 35 HP) motor and a BT50 (ISO50) taper, and AWEA states 642 N-m at 387 rpm for its 6,000 rpm high torque spindle. A floating type hydraulic tool release keeps the unclamping force off the spindle bearing. Y travel is 2,400 mm (94.5 in), Z is 760 mm (29.9 in), and the gap between columns is 2,300 mm (90.6 in).
Need more load on the same length? The LP-6025YF is rated for 20,000 kg (44,092 lb) on a 6,020 x 2,400 mm (237.0 x 94.5 in) table and weighs 49,000 kg (108,025 lb).
Full Specifications
| Parameter | Value |
|---|---|
| X Axis Travel | 6,000 mm (236.2 in) |
| Y Axis Travel | 2,400 mm (94.5 in) |
| Z Axis Travel | 760 mm (29.9 in) |
| Table Size | 6,020 x 2,010 mm (237.0 x 79.1 in) |
| Max Table Load | 18,000 kg (39,683 lb) |
| Distance Spindle Nose to Table | 200 ~ 960 mm (7.9 ~ 37.8 in) |
| Distance Between Columns | 2,300 mm (90.6 in) |
| Spindle Motor Power | 22 / 26 kW (30 / 35 HP) |
| Max Spindle Speed | 6,000 rpm ; Direct Drive 8,000 / 10,000 rpm (Opt.) |
| Spindle Taper | BT50 (ISO50) / DIN69871-A (Opt.) |
| Rapid Traverse X | 10,000 mm/min (394 ipm) |
| Rapid Traverse Y | 15,000 mm/min (591 ipm) |
| Rapid Traverse Z | 15,000 mm/min (591 ipm) |
| Cutting Feed Rate | 1 ~ 5,000 mm/min (0.04 ~ 197 ipm) |
| Tool Capacity | 32 (60 / 90 / 120 Opt.) |
| Max Tool Diameter (full magazine) | Ø127 / Ø215 mm (Ø5.0 / Ø8.5 in) |
| Max Tool Length | 350 mm (13.8 in) |
| Max Tool Weight | 20 kg (44 lb) |
| Positioning Accuracy Jis B 6338 | ± 0.015 mm / Full Travel |
| Positioning Accuracy VDI 3441 | P ≤ 0.050 mm / Full Travel |
| Repeatability Jis B 6338 | ± 0.003 mm |
| Repeatability VDI 3441 | Ps ≤ 0.035 mm |
| Air Pressure Requirement | 5 ~ 8 (5) kg/cm² |
| Hydraulic Tank Capacity | 120 liter (10 HP) |
| Lubrication Tank Capacity | 6 liter |
| Coolant Tank Capacity | 650 liter (1.5 HP) |
| Machine Weight | 45,000 kg (99,206 lb) |
Specifications sourced from awea.com — verified 2026-10-04
Strengths & Limitations
Strengths
- 18,000 kg (39,683 lb) table load, the highest in the LP-21YF group
- 6,020 x 2,010 mm (237.0 x 79.1 in) table under 6,000 mm (236.2 in) of X travel
- 642 N-m at 387 rpm stated for the 6,000 rpm high torque spindle with its 2-speed gear box
- Floating type hydraulic tool release that takes pressure off the spindle bearing
- Same 2,400 mm (94.5 in) Y and 15,000 mm/min (591 ipm) Y and Z rapids as the shorter sizes
Limitations
- Cutting feed limited to 1 ~ 5,000 mm/min (0.04 ~ 197 ipm)
- VDI positioning of P ≤ 0.050 mm over full travel, twice the figure printed for the LP-3021YF
- X rapid of 10,000 mm/min (394 ipm)
- Weighs 45,000 kg (99,206 lb), which sets the foundation and rigging requirements
- Z travel stays at 760 mm (29.9 in) however long the table is
Best For
Frequently Asked Questions
01
5,000 mm/min (197 ipm); the table row reads 1 ~ 5,000 mm/min (0.04 ~ 197 ipm). The LP-5021YF is listed at 1 ~ 8,000 mm/min (0.04 ~ 315 ipm) and the LP-4021YF at 1 ~ 10,000 mm/min (0.04 ~ 394 ipm), so the feed limit drops with each step in length.
02
The machine weighs 45,000 kg (99,206 lb) and its table is rated for 18,000 kg (39,683 lb). Plan the foundation for both figures together, since a fully loaded table adds the workpiece and its fixtures to the machine weight.
03
That depends on the tolerance over the length involved. AWEA lists P ≤ 0.050 mm over full travel and Ps ≤ 0.035 mm under VDI, and ± 0.015 mm over full travel with ± 0.003 mm repeatability under JIS. Compare the print against the standard your inspection uses.
04
The LP-6025YF is wider and heavier: a 6,020 x 2,400 mm (237.0 x 94.5 in) table, 3,200 mm (126.0 in) of Y, 2,700 mm (106.3 in) between columns, a 20,000 kg (44,092 lb) load and a weight of 49,000 kg (108,025 lb). Both have 6,000 mm of X, a 10,000 mm/min X rapid and a cutting feed of 1 ~ 5,000 mm/min.
05
BT50 (ISO50), with DIN69871-A as an option. The motor is 22 / 26 kW (30 / 35 HP) and the listed speed is 6,000 rpm, with direct drive spindles of 8,000 / 10,000 rpm as options.
More from AWEA
Other 5-Axis Machining Centers
Breton Matrix E2 1100 K25
Hedelius TILTENTA 9-2600 EL
HNK HPM-40M (40x80)
Vision Wide GSF-4027
Makino SLIM5n 4+1
