AWEA MCP-16060
Key Specifications
Spindle Taper
Tool Capacity
Table Size
Spindle Power
x axis travel
y axis travel
How much does the AWEA MCP-16060 cost?
Price estimate
We do not have a price for the AWEA MCP-16060 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
Planning the building comes first with the AWEA MCP-16060. This moving column multi-face machining center has a 16,000 x 4,800 mm (629.9 x 189.0 in) table, 16,000 mm (629.9 in) of X travel and a bridge spanning 6,400 mm (252.0 in) of Y, and its service figures deserve a look before its cutting figures.
Start with coolant: 5,400 liter. That is the tank size of every 6,400 mm model, and it is larger than the 4,000 liter of the MCP-16050 or the 3,400 liter of the MCP-16040, so the pit or floor tank has to be sized for the wide group. The hydraulic tank is 100 liter and the lubrication oil tank 6 liter.
Electrical demand is listed as 220 ± 10 % Vac / 80 kVA. The same line appears on the shortest machine of the group, the MCP-8060, so the longer bed adds nothing to the supply. Compressed air is given as 5 ~ 8 (5) kg/cm².
What the table leaves out is as relevant to a foundation plan. There is no machine weight, no table load and no floor dimension. The foundation drawing therefore has to come from AWEA. One figure helps with crane access: the columns are 5,700 mm apart, or 5,500 mm with the X-axis covers, and the maker describes low side structures and a very low profile for loading.
The cutting end is common to the group. A BBT50 spindle with a 22 / 26 kW (29.5 / 34.9 hp) motor, 1,400 mm (55.1 in) of Z, a 40T magazine and feed rates of 1 ~ 10 m/min (39 ~ 394 ipm).
Full Specifications
| Parameter | Value |
|---|---|
| X Axis Travel | 16,000 mm (629.9 in) |
| Y Axis Travel | 6,400 mm (252.0 in) |
| Z Axis Travel | 1,400 mm (55.1 in) (1,600 mm Opt.) |
| Table Size | 16,000 x 4,800 mm (629.9 x 189.0 in) |
| Distance Spindle Nose to Table | 800 ~ 2,200 mm (31.5 ~ 86.6 in) (600 ~ 2,200 mm Opt.) |
| Distance Between Columns with X Axis Covers | 5,700 mm (5,500 mm) |
| Spindle Taper | BBT50 |
| Spindle Motor Power | 22 / 26 kW (29.5 / 34.9 hp) |
| Spindle Speed Vertical | 4,000 Gear Spindle (Std.)；5,000 / 6,000 Gear Spindle (Opt.)；8,000 / 12,000 Built-in Spindle (Opt.) |
| Rapid Traverse Xyz | 10 / 10 / 10 m/min (394 / 394 / 394 ipm) |
| Cutting Feed Rate | 1 ~ 10 m/min (39 ~ 394 ipm) |
| Tool Capacity | 40T (60T Opt.) |
| Max Tool Diameter (full magazine) | Ø125 / Ø200 mm (Ø4.9 / Ø7.9 in) |
| Max Tool Length | 400 mm (15.7 in) |
| Max Tool Weight | 20 kg (44 lb) |
| Coolant Tank Capacity | 5,400 liter |
| Lubrication Tank Capacity | 6 liter |
| Hydraulic Tank Capacity | 100 liter |
| Air Pressure Requirement | 5 ~ 8 (5) kg/cm² |
| Power Requirement | 220 ± 10 % Vac / 80 kVA |
Specifications sourced from awea.com — verified 2026-10-04
Strengths & Limitations
Strengths
- Power requirement of 220 ± 10 % Vac / 80 kVA, the same as the MCP-8060 despite the 16,000 mm (629.9 in) bed
- 5,400 liter coolant tank for long unattended cuts
- 16,000 x 4,800 mm (629.9 x 189.0 in) table that stays stationary under the moving columns
- Low side structures and a very low profile for crane loading, per the maker
- Air requirement of 5 ~ 8 (5) kg/cm², within ordinary shop air
Limitations
- Machine weight and floor dimensions are not in the table, so foundation planning waits on the maker
- No table load figure published
- A 5,400 liter coolant system has to be filled, filtered and maintained
- Supply is listed at 220 Vac only; other voltages need a transformer
Best For
Frequently Asked Questions
01
The table lists 220 ± 10 % Vac / 80 kVA. That is the only supply line given. The spindle motor accounts for 22 / 26 kW (29.5 / 34.9 hp) of it. The same requirement is listed for every length in the group, from the MCP-8060 to the MCP-20060.
02
Coolant tank capacity is 5,400 liter, hydraulic tank capacity 100 liter and lubrication oil tank capacity 6 liter. The coolant figure is tied to the width of the machine: the MCP-16050 lists 4,000 liter and the MCP-16040 lists 3,400 liter with the same hydraulic and lubrication tanks.
03
AWEA prints the pneumatic pressure requirement as 5 ~ 8 (5) kg/cm². The table does not give an air flow figure, so the compressor capacity needed for the head changer and tool changer has to be asked for separately.
04
It does not. Neither machine weight nor maximum table load appears in the specification for this model. Because the 16,000 x 4,800 mm (629.9 x 189.0 in) table is fixed and the columns travel beside it, the foundation carries both a static table and moving column loads, and the maker's foundation drawing is the document to work from.
05
From above or from the side. AWEA describes a big, open machining area with low side structures that makes loading and unloading of large work pieces more convenient and safe. The distance between columns is 5,700 mm, or 5,500 mm with the X-axis covers.
More from AWEA
Other 5-Axis Machining Centers
Reiden RX12
DN Solutions DCM 3250 U
Makino V33i-5XB
Matec 30PU | 40PU
