AWEA MEGA5 P4026
Key Specifications
Max Spindle
Spindle Taper
Tool Capacity
Table Size
x axis travel
y axis travel
How much does the AWEA MEGA5 P4026 cost?
Price estimate
We do not have a price for the AWEA MEGA5 P4026 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
Length starts to cost something at the AWEA MEGA5 P4026. This fixed-bridge 5-axis machine has 4,000 mm (157.5 in) of X travel with the 2,620 mm (103.1 in) Y and 1,000 mm (39.4 in) Z of the narrow MEGA5 P frame, and it is the first size where the X-axis figures step down.
The X rapid is 15 m / min here, while the MEGA5 P3026 moves at 20 m / min. Accuracy by the VDI method widens too: P ≦ 0.030 mm and Ps ≦ 0.025 mm, where the MEGA5 P3026 is listed at P ≦ 0.025 mm and Ps ≦ 0.020 mm. The JIS figures stay at ± 0.015 mm positioning and ± 0.003 mm repeatability over full travel. Y and Z are untouched at 20 m / min and 15 m / min, and the cutting feed is still 10 m / min.
What the buyer gets in return is a 4,200 x 1,500 mm (165.4 x 59.1 in) table rated for 12,000 kg (26,455 lb), and a workpiece length of 4,000 mm. That is enough for long plate parts, beams and die sets machined from five sides in one clamping. The machine weighs 37,000 kg (81,570 lb).
The spindle listed is the TCH-20F head's HSK-A63 unit, 42 / 55 kW (56.3 / 73.8 hp) and 24,000 rpm. AWEA builds two other machines with this X travel. The MEGA5 P4032 is the wide fixed bridge with 3,200 mm (126.0 in) of Y and an HSK-A100 spindle. The MEGA5 G4037 is a gantry machine with 3,700 mm (145.7 in) of Y, a weight of 72,000 kg (158,730 lb) and a 20 T magazine.
Full Specifications
| Parameter | Value |
|---|---|
| X Axis Travel | 4,000 mm (157.5 in) |
| Y Axis Travel | 2,620 mm (103.1 in) |
| Z Axis Travel | 1,000 mm (39.4 in) |
| Table Size | 4,200 x 1,500 mm (165.4 x 59.1 in) |
| Max Table Load | 12,000 kg (26,455 lb) |
| Distance Between Columns | 1,700 mm (66.9 in) |
| Distance Spindle Nose to Table | 200 ~ 1,200 mm (7.9 ~ 47.2 in) |
| Distance 90 Deg Spindle Center to Table | 510 ~ 1,510 mm |
| T-Slots | 22 x 170 mm |
| Spindle Taper | HSK-A63 |
| Spindle Power S1 S6 40 | 42 / 55 kW (56.3 / 73.8 hp) |
| Max Spindle Speed | 24,000 rpm |
| Rapid Traverse X | 15 m / min |
| Rapid Traverse Y | 20 m / min |
| Rapid Traverse Z | 15 m / min |
| Cutting Feed Rate | 10 m / min |
| Tool Capacity | 40 T |
| Max Tool Length | 350 mm (13.8 in) |
| Max Tool Weight | 8 kg (18 lb) |
| Max Tool Diameter (full magazine) | Ø140 / Ø180 mm (Ø5.5 / Ø7.1 in) |
| Positioning Accuracy Jis B 6338 | ± 0.015 mm / Full Travel |
| Positioning Accuracy VDI 3441 | P ≦ 0.030 mm / Full Travel |
| Repeatability Jis B 6338 | ± 0.003 mm / Full Travel |
| Repeatability VDI 3441 | Ps ≦ 0.025 mm |
| Coolant Tank Capacity | 420 liter |
| Lubrication Tank Capacity | 6 liter |
| Hydraulic Tank Capacity | 100 liter |
| Air Pressure Requirement | 5 ~ 8 kg/cm² |
| Machine Weight | 37,000 kg (81,570 lb) |
| Max Workpiece Length | 4,000 mm (157.5 in) |
| Max Workpiece Width | 1,500 mm (59.1 in) |
| Max Workpiece Height | 850 mm (33.5 in) |
Specifications sourced from awea.com — verified 2026-10-04
Strengths & Limitations
Strengths
- 4,200 x 1,500 mm (165.4 x 59.1 in) table rated for 12,000 kg (26,455 lb)
- Y and Z rapids remain 20 m / min and 15 m / min, as on the shorter machines of this frame
- 37,000 kg (81,570 lb), about half the 72,000 kg (158,730 lb) of the MEGA5 G4037 gantry machine with the same X travel
- 40 tools in the magazine; the MEGA5 G4037 carries 20 T
- 24,000 rpm, 42 / 55 kW (56.3 / 73.8 hp) built-in motor spindle
Limitations
- X rapid of 15 m / min, down from 20 m / min on the MEGA5 P3026
- VDI positioning of P ≦ 0.030 mm, wider than the P ≦ 0.025 mm of the MEGA5 P3026
- Workpieces are limited to 1,500 mm (59.1 in) in width and 850 mm (33.5 in) in height
- Maximum tool weight of 8 kg (18 lb) with the HSK-A63 spindle
Best For
Frequently Asked Questions
01
Two things on the X axis. Rapid traverse is 15 m / min, where the MEGA5 P3026 has 20 m / min, and VDI positioning accuracy is P ≦ 0.030 mm, where the MEGA5 P3026 has P ≦ 0.025 mm. Spindle, Y and Z travel, magazine and the JIS accuracy figures are identical. In exchange the X travel is 4,000 mm (157.5 in) and the table load is 12,000 kg (26,455 lb).
02
On the MEGA5 P4026 the bridge is fixed and the table moves the part through 4,000 mm (157.5 in). The MEGA5 G4037 is from AWEA's dynamic gantry series: it has the same X travel, 3,700 mm (145.7 in) of Y, a 12,000 rpm HSK-A100 spindle, 20 T in the magazine and a weight of 72,000 kg (158,730 lb). The fixed-bridge machine is the smaller installation and the faster spindle; the gantry takes far wider parts.
03
The spindle nose sits 200 ~ 1,200 mm (7.9 ~ 47.2 in) above the table over the 1,000 mm (39.4 in) Z stroke. With the head turned horizontal, the spindle centre line is 510 ~ 1,510 mm above the table. AWEA lists the maximum workpiece height as 850 mm (33.5 in), so check tool length against tall parts.
04
AWEA describes a wide span, centre-driven X axis with the ball screw placed in the middle of the table. On this frame the table runs on two guideways, and the X and Y axes use roller type linear guide ways. The Z axis is a box structure headstock on linear guide ways with a large saddle.
More from AWEA
Other 5-Axis Machining Centers
Zayer ALTEA
Brother Speedio S300X1
DN Solutions DVF 5000
Campro NU 550
Hartford HSA-636EA
