AWEA HVM-6025
Key Specifications
Spindle Taper
Tool Capacity
Table Size
Spindle Power
x axis travel
y axis travel
How much does the AWEA HVM-6025 cost?
Price estimate
We do not have a price for the AWEA HVM-6025 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
The AWEA HVM-6025 stretches the 2,500 mm (98.4 in) column frame of the HVM series to its longest bed. X travel is 6,000 mm (236.2 in), Y is 3,200 mm (126.0 in), Z is 1,000 mm (39.3 in), and the table measures 6,020 x 2,010 mm (237.0 x 79.1 in). This five-face bridge type machining center is aimed at one kind of part: long, heavy, and not especially wide.
Heavy is the operative word. At 17,000 kg (37,400 lb) the table rating is well above the 12,000 kg (26,400 lb) given for the HVM-5025, so this is the first machine on the frame that can take a solid casting or a filled fixture plate along most of its length. If the part is wider as well, the HVM-6032 has a 6,020 x 2,400 mm (237.0 x 94.5 in) table rated for 20,000 kg (44,000 lb), and its listed weight and length match this machine's: 57,000 kg (125,400 lb) and 14,875 mm (585 in).
Expect slower motion than on the short models. X rapid is 10,000 mm/min (394 ipm). The cutting feed range tops out at 5,000 mm/min (196.9 IPM), half the 10,000 mm/min (393.7 IPM) available on the HVM-4025.
Accuracy is quoted without a length allowance: ± 0.015 mm (± 0.0006 in) positioning over full travel and ± 0.003 mm (± 0.0001 in) repeatability. Over a 6,000 mm stroke, shop temperature and foundation quality will decide how much of that reaches the part.
Full Specifications
| Parameter | Value |
|---|---|
| X Axis Travel | 6,000 mm (236.2") |
| Y Axis Travel | 3,200 mm (126.0") |
| Z Axis Travel | 1,000 mm (39.3") |
| Table Size | 6,020 x 2,010 mm (237.0" x 79.1") |
| Max Table Load | 17,000 kg (37,400 lb) |
| Distance Between Columns | 2,500 mm (98.4") |
| Spindle Motor Power | 22 / 26 kW (30 / 35 HP) |
| Spindle Taper | BT 50 (7 / 24) |
| Distance Spindle Nose to Table | 200 ~ 1,200 mm (7.9" ~ 47.2") (Standard) 400 ~ 1,400 mm (15.7" ~ 55.1") (Option) |
| Rapid Traverse X | 10,000 mm/min (394 ipm) |
| Cutting Feed Rate | 1 ~ 5,000 mm/min (0.04 ~ 196.9 IPM) |
| Repeatability Jis B 6338 | ± 0.003 mm (± 0.0001") |
| Positioning Accuracy Jis B 6338 | ± 0.015 mm (± 0.0006") full travel |
| Tool Capacity | 60 tools (90, 120 Option) |
| Max Tool Diameter (full magazine) | 127 / 240 mm (5.0" / 9.4") |
| Max Tool Length | 400 mm (15.7") |
| Max Tool Weight | 25 kg (55 lb) |
| Tool Change Time | 80 sec. |
| Machine Length | 14,875 mm (585") |
| Machine Width | 6,775 mm (267") |
| Machine Height | 5,600 mm (220") |
| Machine Weight | 57,000 kg (125,400 lb) |
Specifications sourced from awea.com — verified 2026-10-04
Strengths & Limitations
Strengths
- 17,000 kg (37,400 lb) table load, against 12,000 kg (26,400 lb) on the HVM-5025
- 6,000 mm (236.2 in) of X travel over a 6,020 x 2,010 mm (237.0 x 79.1 in) table
- Positioning accuracy of ± 0.015 mm (± 0.0006 in) is stated for full travel, including the 6,000 mm axis
- 60-tool magazine, expandable to 90 or 120, for long unattended cycles on large parts
- Listed width of 6,775 mm (267 in), unchanged from the HVM-4025
Limitations
- Cutting feed limited to 5,000 mm/min (196.9 IPM)
- X rapid of 10,000 mm/min (394 ipm); crossing the full stroke takes time
- No Y or Z rapid traverse figure is listed for this model
- 14,875 mm (585 in) long and 57,000 kg (125,400 lb), a serious foundation job
- The HVM-6032 offers 20,000 kg (44,000 lb) of table load at an equal listed length and weight
Best For
Frequently Asked Questions
01
Both have 6,000 mm (236.2 in) of X travel. The HVM-6025 has a 6,020 x 2,010 mm (237.0 x 79.1 in) table, 2,500 mm (98.4 in) between the columns, 3,200 mm (126.0 in) of Y and a 17,000 kg (37,400 lb) rating. The HVM-6032 has a 6,020 x 2,400 mm (237.0 x 94.5 in) table, 3,200 mm (126.0 in) between the columns, 3,900 mm (153.5 in) of Y and a 20,000 kg (44,000 lb) rating.
02
Yes. The HVM-6025 is listed at 1 ~ 5,000 mm/min (0.04 ~ 196.9 IPM). The HVM-5025 is listed at 1 ~ 8,000 mm/min (0.04 ~ 315.0 IPM) and the HVM-4025 at 1 ~ 10,000 mm/min (0.04 ~ 393.7 IPM). Check programmed feeds for finishing with large face mills against the lower limit.
03
17,000 kg (37,400 lb). That figure includes everything on the table: the workpiece, fixtures, parallels and any rotary or angle equipment.
04
The distance from spindle nose to table is 200 ~ 1,200 mm (7.9 ~ 47.2 in) on the standard machine. A 400 ~ 1,400 mm (15.7 ~ 55.1 in) version is listed as an option. Z travel is 1,000 mm (39.3 in) in both cases, and AWEA notes the distance may vary with other options.
More from AWEA
Other 5-Axis Machining Centers
DMG Mori DMF 200|8
Alzmetall GS 1200/5-T
DMG Mori DMU 40 FD eVo
Huron MX 16 M
Zimmermann FZP42
