AWEA MEGA5 P3026
Key Specifications
Max Spindle
Spindle Taper
Tool Capacity
Table Size
x axis travel
y axis travel
How much does the AWEA MEGA5 P3026 cost?
Price estimate
We do not have a price for the AWEA MEGA5 P3026 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
Two fixed-bridge MEGA5 machines offer 3,000 mm (118.1 in) of X travel, and the AWEA MEGA5 P3026 is the narrower, faster one. Its bridge spans 1,700 mm (66.9 in) between the columns, Y travel is 2,620 mm (103.1 in), Z is 1,000 mm (39.4 in), and the listed spindle is an HSK-A63 unit that runs to 24,000 rpm.
The alternative is the MEGA5 P3032, with 3,200 mm (126.0 in) of Y, 2,700 mm (106.3 in) between columns, an HSK-A100 spindle at 12,000 rpm and a weight of 46,500 kg (102,513 lb). The MEGA5 P3026 weighs 35,000 kg (77,160 lb). Length does not separate the two. Part width and the kind of cutting do: work up to 1,500 mm (59.1 in) wide that rewards spindle speed belongs here.
One detail of the table is easy to miss. It is 3,260 x 1,500 mm (128.3 x 59.1 in), longer than the X stroke, yet the longest workpiece AWEA lists is 3,000 mm. The extra length is fixture and clamping space, not machining range. Load capacity is 10,000 kg (22,046 lb). AWEA notes that this frame carries the table on two guideways, with the X ball screw running down the centre.
X and Y both rapid at 20 m / min, Z at 15 m / min. This is the longest of the 1,700 mm machines to hold that X figure, because the MEGA5 P4026 falls to 15 m / min. Accuracy is unchanged from the shorter MEGA5 P2526 as well: ± 0.015 mm positioning by the JIS method and P ≦ 0.025 mm by the VDI method, over full travel.
Full Specifications
| Parameter | Value |
|---|---|
| X Axis Travel | 3,000 mm (118.1 in) |
| Y Axis Travel | 2,620 mm (103.1 in) |
| Z Axis Travel | 1,000 mm (39.4 in) |
| Table Size | 3,260 x 1,500 mm (128.3 x 59.1 in) |
| Max Table Load | 10,000 kg (22,046 lb) |
| Distance Between Columns | 1,700 mm (66.9 in) |
| Distance Spindle Nose to Table | 200 ~ 1,200 mm (7.9 ~ 47.2 in) |
| Distance 90 Deg Spindle Center to Table | 510 ~ 1,510 mm |
| T-Slots | 22 x 170 mm |
| Spindle Taper | HSK-A63 |
| Spindle Power S1 S6 40 | 42 / 55 kW (56.3 / 73.8 hp) |
| Max Spindle Speed | 24,000 rpm |
| Rapid Traverse X | 20 m / min |
| Rapid Traverse Y | 20 m / min |
| Rapid Traverse Z | 15 m / min |
| Cutting Feed Rate | 10 m / min |
| Tool Capacity | 40 T |
| Max Tool Length | 350 mm (13.8 in) |
| Max Tool Weight | 8 kg (18 lb) |
| Max Tool Diameter (full magazine) | Ø140 / Ø180 mm (Ø5.5 / Ø7.1 in) |
| Positioning Accuracy Jis B 6338 | ± 0.015 mm / Full Travel |
| Positioning Accuracy VDI 3441 | P ≦ 0.025 mm / Full Travel |
| Repeatability Jis B 6338 | ± 0.003 mm / Full Travel |
| Repeatability VDI 3441 | Ps ≦ 0.020 mm |
| Coolant Tank Capacity | 420 liter |
| Lubrication Tank Capacity | 6 liter |
| Hydraulic Tank Capacity | 100 liter |
| Air Pressure Requirement | 5 ~ 8 kg/cm² |
| Machine Weight | 35,000 kg (77,160 lb) |
| Max Workpiece Length | 3,000 mm (118.1 in) |
| Max Workpiece Width | 1,500 mm (59.1 in) |
| Max Workpiece Height | 850 mm (33.5 in) |
Specifications sourced from awea.com — verified 2026-10-04
Strengths & Limitations
Strengths
- Keeps the 20 m / min X rapid at 3,000 mm (118.1 in) of travel; the MEGA5 P4026 drops to 15 m / min
- Table of 3,260 x 1,500 mm (128.3 x 59.1 in) extends past the X stroke, leaving clamping room at the ends
- 35,000 kg (77,160 lb), against 46,500 kg (102,513 lb) for the MEGA5 P3032 with the same X travel
- Positioning of ± 0.015 mm (JIS) and repeatability of ± 0.003 mm over full travel
- TCH-20F head with 55 kW at S6 and 24,000 rpm for small-tool, high-speed work
Limitations
- Only 1,500 mm (59.1 in) of part width; the MEGA5 P3032 takes 2,400 mm (94.5 in)
- The table runs on two guideways, where AWEA gives the wider models four
- HSK-A63 tooling limited to 8 kg (18 lb) per tool; the MEGA5 P3032 handles 15 kg (33 lb)
- No listed Z option beyond 1,000 mm (39.4 in)
Best For
Frequently Asked Questions
01
Both have 3,000 mm (118.1 in) of X. The MEGA5 P3026 has 2,620 mm (103.1 in) of Y, takes parts 1,500 mm (59.1 in) wide and is listed with a 24,000 rpm HSK-A63 spindle. The MEGA5 P3032 has 3,200 mm (126.0 in) of Y, takes parts 2,400 mm (94.5 in) wide and is listed with a 12,000 rpm HSK-A100 spindle. Choose by part width and by whether the work is high-speed finishing or heavier cutting.
02
No. X travel is 3,000 mm (118.1 in) and AWEA lists the maximum workpiece length as 3,000 mm, although the table is 3,260 x 1,500 mm (128.3 x 59.1 in). Treat the additional table length as room for clamps, stops and fixture plates. The T-slots are 22 x 170 mm.
03
AWEA states positioning accuracy of ± 0.015 mm and repeatability of ± 0.003 mm over full travel by the JIS method. By the VDI method the figures are P ≦ 0.025 mm and Ps ≦ 0.020 mm. Absolute encoders on the rotary axes are standard equipment, and the head is water cooled to hold accuracy through long runs.
04
Direct drive motors turn both rotary axes, which AWEA describes as giving zero backlash. The B-axis has two motors to overcome the inertia of the tilting spindle. For cuts at a fixed angle a hydraulic clamping system locks the axes, and the bearings are cross roller types.
05
AWEA states that the spindle reaches its optimal temperature within 10 minutes from a cold start and then stays stable, which it attributes to the spindle cooling system. The motor is built into the spindle, a layout the maker says reduces vibration. Coolant through spindle (CTS) is available as an option.
More from AWEA
Other 5-Axis Machining Centers
Zayer AETOS
DN Solutions DNM 350 5AX
Fryer 5X-60
Campro NU 255C
