AWEA MEGA5 G10037
Key Specifications
Max Spindle
Spindle Taper
Tool Capacity
Table Size
x axis travel
y axis travel
How much does the AWEA MEGA5 G10037 cost?
Price estimate
We do not have a price for the AWEA MEGA5 G10037 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
With 10,000 mm (393.7 in) of X travel, the AWEA MEGA5 G10037 is the longest standard length in the MEGA5 G gantry series on the narrower of its two frames. Y is 3,700 mm (145.7 in), Z is 1,200 mm (47.2 in), and the fixed table measures 10,000 x 3,800 mm (393.7 x 149.6 in).
Length costs little in speed. The gantry runs on a rack and pinion X drive with dual servo motors and dual linear scales, so the X rapid stays at 20 m / min, the same as on the MEGA5 G4037 at well under half the travel. Length does cost accuracy. AWEA's VDI figures for this model are P = 0.050 mm over full travel and Ps = 0.038 mm, where the MEGA5 G4037 lists P = 0.025 mm and Ps = 0.018 mm. Anyone machining mating features at opposite ends of a long part should plan around those numbers, not around the ± 0.010 mm JIS figure that every size shares.
A table this long is rarely filled by one part. Because the tool exchange is carried out outside the machining area, a second job can be set up at one end of the table while its neighbour is cut, without the magazine sitting in the chip stream. The 20 T drum magazine is standard and 40 tools are optional.
The machine weighs 132,000 kg (291,005 lb). Oddly, that is less than the 139,500 kg (307,540 lb) of the shorter but wider MEGA5 G8047. AWEA also states that X travel can be expanded on request.
Full Specifications
| Parameter | Value |
|---|---|
| X Axis Travel | 10,000 mm (393.7 in) |
| Y Axis Travel | 3,700 mm (145.7 in) |
| Z Axis Travel | 1,200 mm (47.2 in) (opt. 1,400 mm) |
| Table Size | 10,000 x 3,800 mm (393.7 x 149.6 in) |
| Max Table Load | 2,500 kg / m² |
| Distance Between Columns | 4,800 mm (189.0 in) |
| Distance Spindle Nose to Table | TCH-30F = 200 ~ 1,400 mm (opt. 200 ~ 1,600 mm) TCH-20F = 355 ~ 1,555 mm (opt. 355 ~ 1,755 mm) |
| Distance 90 Deg Spindle Center to Table | TCH-30F = 550 ~ 1,750 mm (opt. 550 ~ 1,950 mm) TCH-20F = 665 ~ 1,865 mm (opt. 665 ~ 2,065 mm) |
| T-Slots | 28 x 200 mm |
| Spindle Taper | HSK-A100 |
| Spindle Power S1 S6 40 | 40 / 50 kW (53.6 / 67.1 hp) |
| Max Spindle Speed | 12,000 rpm |
| Rapid Traverse X | 20 m / min |
| Rapid Traverse Y | 15 m / min |
| Rapid Traverse Z | 10 m / min |
| Cutting Feed Rate | 10 m / min |
| Tool Capacity | 20 T |
| Max Tool Length | 350 mm (13.8 in) |
| Max Tool Weight | 15 kg (33 lb) |
| Max Tool Diameter (full magazine) | Ø160 / Ø230 mm (Ø6.3 / Ø9.1 in) |
| Positioning Accuracy Jis B 6338 | ± 0.010 mm / Full Travel |
| Positioning Accuracy VDI 3441 | P = 0.050 mm / Full Travel |
| Repeatability Jis B 6338 | ± 0.003 mm |
| Repeatability VDI 3441 | Ps = 0.038 mm |
| Coolant Tank Capacity | 1,600 liter |
| Lubrication Tank Capacity | 6 liter |
| Hydraulic Tank Capacity | 150 liter |
| Air Pressure Requirement | 6 ~ 8 kg/cm² |
| Machine Weight | 132,000 kg (291,005 lb) |
| Max Workpiece Length | 10,000 mm (393.7 in) |
| Max Workpiece Width | 3,700 mm (145.7 in) |
| Max Workpiece Height | 1,050 mm (41.3 in) |
Specifications sourced from awea.com — verified 2026-10-04
Strengths & Limitations
Strengths
- 10,000 mm (393.7 in) of X travel with the X rapid still at 20 m / min
- 10,000 x 3,800 mm (393.7 x 149.6 in) fixed table with 28 x 200 mm T-slots, rated at 2,500 kg/m²
- Rack and pinion X axis with dual servo motors and dual linear scales
- Lighter than the MEGA5 G8047: 132,000 kg (291,005 lb) against 139,500 kg (307,540 lb)
- AWEA states that X travel can be expanded on customer request
Limitations
- Widest VDI figures of the 3,700 mm frame: P = 0.050 mm over full travel, Ps = 0.038 mm
- Coolant tank is 1,600 liter, the same as on the MEGA5 G4037 with a 4,000 mm (157.5 in) table length
- Standard magazine of 20 T for a machine that can hold several setups; 40 tools are optional
- Y travel stays at 3,700 mm (145.7 in); the MEGA5 G10047 is needed for 4,700 mm (185.0 in)
Best For
Frequently Asked Questions
01
Not in rapid traverse. X is 20 m / min, Y 15 m / min and Z 10 m / min, and the cutting feed rate is 10 m / min, the same values as on the 4,000 mm MEGA5 G4037. The X axis is driven by a rack and pinion system, which AWEA describes as having no backlash, with dual servo motors.
02
AWEA lists P = 0.050 mm over full travel and Ps = 0.038 mm under VDI, and ± 0.010 mm over full travel with ± 0.003 mm repeatability under JIS. The VDI figures are the widest of the 3,700 mm frame; the MEGA5 G8037 lists P = 0.040 mm and Ps = 0.030 mm.
03
The MEGA5 G10047 is the wide frame: 4,700 mm (185.0 in) of Y, 5,800 mm (228.3 in) between columns and a 10,000 x 4,800 mm (393.7 x 189.0 in) table, at 167,000 kg (368,166 lb). The G10037 has 3,700 mm (145.7 in) of Y, 4,800 mm (189.0 in) between columns and weighs 132,000 kg (291,005 lb). Its Y rapid is 15 m / min where the MEGA5 G10047 has 12 m / min.
04
At a drum type magazine outside the machining area, which AWEA says keeps cutting fluid and chips off the tools and the changer. It holds 20 tools as standard and 40 as an option. Each tool may be up to 350 mm (13.8 in) long and 15 kg (33 lb), with a diameter of Ø160 / Ø230 mm (Ø6.3 / Ø9.1 in).
More from AWEA
Other 5-Axis Machining Centers
Zimmermann FZP32
DN Solutions DCM 4280 U
Makino V90S
GF Machining Liechti go-Mill 350
Starrag Heckert X80
