AWEA HVM-5025
Key Specifications
Spindle Taper
Tool Capacity
Table Size
Spindle Power
x axis travel
y axis travel
How much does the AWEA HVM-5025 cost?
Price estimate
We do not have a price for the AWEA HVM-5025 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
Five metres of X travel is where the AWEA HVM-5025 begins to trade speed for reach. The machine is a five-face bridge type machining center with 5,000 mm (196.8 in) in X, 3,200 mm (126.0 in) in Y and 1,000 mm (39.3 in) in Z, and its X rapid is 10,000 mm/min (394 ipm). The HVM-4025, one size shorter with an unchanged column spacing, is listed at 15,000 mm/min (590.6 IPM).
Cutting feed narrows too. The range here is 1 ~ 8,000 mm/min (0.04 ~ 315.0 IPM), where the HVM-4025 reaches 10,000 mm/min (393.7 IPM) and the HVM-6025 stops at 5,000 mm/min (196.9 IPM). In practice that ceiling touches light finishing passes with large cutters more than it touches roughing in steel or iron.
The table is 5,020 x 2,010 mm (197.6 x 79.1 in) between columns set 2,500 mm (98.4 in) apart. Its load rating deserves a second look before ordering: 12,000 kg (26,400 lb), no more than the shorter HVM-4025. The HVM-6025 is rated at 17,000 kg (37,400 lb), and the HVM-5032 at 18,000 kg (39,600 lb) with identical X travel. A dense workpiece that uses the full table length may belong on one of those.
Spindle and magazine are the series standard, BT 50 (7 / 24) with 22 / 26 kW (30 / 35 HP) and 60 tools. The machine weighs 55,000 kg (121,000 lb) and occupies 12,775 mm (503 in) by 6,775 mm (267 in).
Full Specifications
| Parameter | Value |
|---|---|
| X Axis Travel | 5,000 mm (196.8") |
| Y Axis Travel | 3,200 mm (126.0") |
| Z Axis Travel | 1,000 mm (39.3") |
| Table Size | 5,020 x 2,010 mm (197.6" x 79.1") |
| Max Table Load | 12,000 kg (26,400 lb) |
| Distance Between Columns | 2,500 mm (98.4") |
| Spindle Motor Power | 22 / 26 kW (30 / 35 HP) |
| Spindle Taper | BT 50 (7 / 24) |
| Distance Spindle Nose to Table | 200 ~ 1,200 mm (7.9" ~ 47.2") (Standard) 400 ~ 1,400 mm (15.7" ~ 55.1") (Option) |
| Rapid Traverse X | 10,000 mm/min (394 ipm) |
| Cutting Feed Rate | 1 ~ 8,000 mm/min (0.04 ~ 315.0 IPM) |
| Repeatability Jis B 6338 | ± 0.003 mm (± 0.0001") |
| Positioning Accuracy Jis B 6338 | ± 0.015 mm (± 0.0006") full travel |
| Tool Capacity | 60 tools (90, 120 Option) |
| Max Tool Diameter (full magazine) | 127 / 240 mm (5.0" / 9.4") |
| Max Tool Length | 400 mm (15.7") |
| Max Tool Weight | 25 kg (55 lb) |
| Tool Change Time | 80 sec. |
| Machine Length | 12,775 mm (503") |
| Machine Width | 6,775 mm (267") |
| Machine Height | 5,600 mm (220") |
| Machine Weight | 55,000 kg (121,000 lb) |
Specifications sourced from awea.com — verified 2026-10-04
Strengths & Limitations
Strengths
- 5,000 mm (196.8 in) of X travel with a 5,020 x 2,010 mm (197.6 x 79.1 in) table
- Cutting feed to 8,000 mm/min (315.0 IPM), above the 5,000 mm/min (196.9 IPM) of the HVM-6025
- 55,000 kg (121,000 lb) weight on a 6,775 mm (267 in) wide footprint
- 22 / 26 kW (30 / 35 HP) spindle motor with a BT 50 (7 / 24) taper
- Repeatability of ± 0.003 mm (± 0.0001 in) and positioning accuracy of ± 0.015 mm (± 0.0006 in) full travel
Limitations
- Table load of 12,000 kg (26,400 lb) is no higher than the HVM-4025; the HVM-5032 carries 18,000 kg (39,600 lb)
- X rapid falls to 10,000 mm/min (394 ipm) from the 15,000 mm/min (590.6 IPM) of the HVM-4025
- No Y or Z rapid traverse figure is listed for this model
- 12,775 mm (503 in) of floor length is needed
Best For
Frequently Asked Questions
01
AWEA's table gives 12,000 kg (26,400 lb) for both. The HVM-5025 table is 5,020 x 2,010 mm (197.6 x 79.1 in) and the HVM-4025 table is 4,020 x 2,010 mm (158.3 x 79.1 in), so the longer machine has more area but no more rated mass. The page gives no reason. Confirm the rating with AWEA if your part is close to it.
02
X rapid is 10,000 mm/min (394 ipm) and the cutting feed range is 1 ~ 8,000 mm/min (0.04 ~ 315.0 IPM). The table for this model does not list Y or Z rapids.
03
The HVM-5032 has 5,000 mm (196.8 in) of X travel as well, and is rated at 18,000 kg (39,600 lb) on a 5,020 x 2,400 mm (197.6 x 94.5 in) table with 3,200 mm (126.0 in) between the columns. The HVM-6025 keeps the 2,500 mm (98.4 in) column spacing of this machine and is rated at 17,000 kg (37,400 lb).
04
The magazine holds 60 tools, with 90 or 120 as options. Maximum tool length is 400 mm (15.7 in), maximum weight is 25 kg (55 lb), and maximum diameter is listed as 127 / 240 mm (5.0 / 9.4 in). A tool change takes 80 sec.
More from AWEA
Other 5-Axis Machining Centers
Haas UMC-1000
Alzmetall GS 1000/5-FDT
DMG Mori DMU 125 p FD duoBLOCK
Mitsui Seiki Vertex 100
Makino a900Z
