AWEA LP-5033YF
Image: awea.com, AWEA
Key Specifications
Max Spindle
Spindle Taper
Tool Capacity
Table Size
Spindle Power
x axis travel
How much does the AWEA LP-5033YF cost?
Price estimate
We do not have a price for the AWEA LP-5033YF that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
Five metres of X on the widest LP bridge: the AWEA LP-5033YF pairs 5,000 mm (196.9 in) of X travel with 3,900 mm (153.5 in) of Y, 760 mm (29.9 in) of Z and 3,500 mm (137.8 in) between its columns. It is built as a 5-face machining center, with an automatic head changer and a tool changer that serves the spindle in both the vertical and the horizontal position.
Where does it sit? Two neighbours frame it. The LP-5025YF has the same 5,020 x 2,400 mm (197.6 x 94.5 in) table and the same 18,000 kg (39,683 lb) rating, but 2,700 mm (106.3 in) between columns and 3,200 mm (126.0 in) of Y. So the choice between those two is about part width and how far the horizontal head must stand off the side of the work, not about weight on the table. The other neighbour is the LP-5033, the 3-axis machine on this frame, which lists 3,300 mm (129.9 in) of Y as standard.
Length costs speed on this series. X rapid is 10,000 mm/min (394 ipm), the same figure as Y, while Z moves at 15,000 mm/min (591 ipm). Cutting feed is limited to 1 ~ 5,000 mm/min (0.04 ~ 197 ipm). AWEA drives the X axis from a ball screw placed on the centreline of the table and fits a vibration absorber to it, and the base carries the table on 4 guide ways so it does not overhang.
Under VDI the positioning accuracy is P ≤ 0.040 mm over full travel with repeatability Ps ≤ 0.030 mm. The spindle is BT50 with 22 / 26 kW (30 / 35 HP) and 6,000 rpm. Budget floor capacity for 48,000 kg (105,820 lb) of machine before any workpiece is loaded.
Full Specifications
| Parameter | Value |
|---|---|
| X Axis Travel | 5,000 mm (196.9 in) |
| Y Axis Travel | 3,900 mm (153.5 in) |
| Z Axis Travel | 760 mm (29.9 in) |
| Table Size | 5,020 x 2,400 mm (197.6 x 94.5 in) |
| Max Table Load | 18,000 kg (39,683 lb) |
| Distance Spindle Nose to Table | 200 ~ 960 mm (7.9 ~ 37.8 in) |
| Distance Between Columns | 3,500 mm (137.8 in) |
| Spindle Motor Power | 22 / 26 kW (30 / 35 HP) |
| Max Spindle Speed | 6,000 rpm ; Direct Drive 8,000 / 10,000 rpm (Opt.) |
| Spindle Taper | BT50 (ISO50) / DIN69871-A (Opt.) |
| Rapid Traverse X | 10,000 mm/min (394 ipm) |
| Rapid Traverse Y | 10,000 mm/min (394 ipm) |
| Rapid Traverse Z | 15,000 mm/min (591 ipm) |
| Cutting Feed Rate | 1 ~ 5,000 mm/min (0.04 ~ 197 ipm) |
| Tool Capacity | 32 (60 / 90 / 120 Opt.) |
| Max Tool Diameter (full magazine) | Ø127 / Ø215 mm (Ø5.0 / Ø8.5 in) |
| Max Tool Length | 350 mm (13.8 in) |
| Max Tool Weight | 20 kg (44 lb) |
| Positioning Accuracy VDI 3441 | P ≤ 0.040 mm / Full Travel |
| Repeatability Jis B 6338 | ± 0.003 mm |
| Repeatability VDI 3441 | Ps ≤ 0.030 mm |
| Air Pressure Requirement | 5 ~ 8 (5) kg/cm² |
| Hydraulic Tank Capacity | 120 liter (10 HP) |
| Lubrication Tank Capacity | 6 liter |
| Coolant Tank Capacity | 1,000 liter (1.5 HP) |
| Machine Weight | 48,000 kg (105,820 lb) |
Specifications sourced from awea.com — verified 2026-10-04
Strengths & Limitations
Strengths
- 18,000 kg (39,683 lb) table load on a 5,020 x 2,400 mm (197.6 x 94.5 in) table
- 3,500 mm (137.8 in) between columns, well beyond the 2,700 mm (106.3 in) of the LP-5025YF
- Head changer with two enclosed cabinets, so a horizontal head and the spindle cap swap without manual work
- X-axis ball screw on the table centreline with a vibration absorber
- Z rapid of 15,000 mm/min (591 ipm), faster than the 10,000 mm/min (394 ipm) of the LP-5033YZF
Limitations
- X rapid is 10,000 mm/min (394 ipm); the LP-4033YF reaches 15,000 mm/min (591 ipm)
- Cutting feed tops out at 5,000 mm/min (197 ipm)
- 760 mm (29.9 in) of Z travel limits part height plus tool length to the 960 mm (37.8 in) maximum nose-to-table distance
- VDI positioning accuracy widens to P ≤ 0.040 mm from the P ≤ 0.030 mm of the LP-4033YF
Best For
Frequently Asked Questions
01
Width. The LP-5033YF has 3,500 mm (137.8 in) between columns and 3,900 mm (153.5 in) of Y travel. The LP-5025YF has 2,700 mm (106.3 in) and 3,200 mm (126.0 in). Table size and the 18,000 kg (39,683 lb) load are identical, and so are the 6,000 rpm spindle and the 10,000 mm/min (394 ipm) X rapid. The LP-5025YF weighs 45,000 kg (99,206 lb), the LP-5033YF 48,000 kg (105,820 lb).
02
Rapid traverse is 10,000 mm/min (394 ipm) on X and Y and 15,000 mm/min (591 ipm) on Z. The programmable cutting feed runs from 1 to 5,000 mm/min (0.04 ~ 197 ipm). X and Y run on roller type linear guide ways; the Z axis is a hardened and ground box way.
03
Yes. The table lists direct drive spindles of 8,000 rpm and 10,000 rpm as options beside the 6,000 rpm unit. AWEA gives 165 N-m at 1,500 rpm for the direct drive design, and notes that the Z axis can be built with roller type linear guide ways when that spindle is fitted. The taper stays BT50, with DIN69871-A as an option.
More from AWEA
Other 5-Axis Machining Centers
Breton Matrix E1 1000 K20
Hedelius TILTENTA 7-2600 NEO
Vision Wide GSF-2232
Juaristi TH5-MGX12
