AWEA LP-5021YF
Image: awea.com, AWEA
Key Specifications
Max Spindle
Spindle Taper
Tool Capacity
Table Size
Spindle Power
x axis travel
How much does the AWEA LP-5021YF cost?
Price estimate
We do not have a price for the AWEA LP-5021YF that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
At 5,000 mm (196.9 in) of X travel the AWEA LP-5021YF gives up some speed for length. Its X rapid is 10,000 mm/min (394 ipm), where the LP-4021YF has 15,000 mm/min (591 ipm), and cutting feed is 1 ~ 8,000 mm/min (0.04 ~ 315 ipm). Y and Z still rapid at 15,000 mm/min (591 ipm).
Length shows in the accuracy rows too. VDI positioning is P ≤ 0.040 mm over full travel and repeatability Ps ≤ 0.030 mm. The JIS figures stay at ± 0.015 mm and ± 0.003 mm.
What the longer bed buys is a 5,020 x 2,010 mm (197.6 x 79.1 in) table that carries 15,000 kg (33,069 lb). AWEA builds the base in one piece on 4 guide ways and says it is enlarged in proportion to the travel, so the table keeps its support at the ends of the stroke instead of hanging over. The X-axis ball screw is placed in the centre of the axis, which AWEA says avoids yawing and uneven guide way wear, and a vibration absorber is fitted to steady the long screw.
In the other two axes this is the same 5-face machine as its shorter relatives: 2,400 mm (94.5 in) of Y, 760 mm (29.9 in) of Z, 200 ~ 960 mm (7.9 ~ 37.8 in) from spindle nose to table and 2,300 mm (90.6 in) between columns. An automatic head changer and a vertical / horizontal ATC system do the 5-face work. The machine weighs 42,000 kg (92,593 lb).
Full Specifications
| Parameter | Value |
|---|---|
| X Axis Travel | 5,000 mm (196.9 in) |
| Y Axis Travel | 2,400 mm (94.5 in) |
| Z Axis Travel | 760 mm (29.9 in) |
| Table Size | 5,020 x 2,010 mm (197.6 x 79.1 in) |
| Max Table Load | 15,000 kg (33,069 lb) |
| Distance Spindle Nose to Table | 200 ~ 960 mm (7.9 ~ 37.8 in) |
| Distance Between Columns | 2,300 mm (90.6 in) |
| Spindle Motor Power | 22 / 26 kW (30 / 35 HP) |
| Max Spindle Speed | 6,000 rpm ; Direct Drive 8,000 / 10,000 rpm (Opt.) |
| Spindle Taper | BT50 (ISO50) / DIN69871-A (Opt.) |
| Rapid Traverse X | 10,000 mm/min (394 ipm) |
| Rapid Traverse Y | 15,000 mm/min (591 ipm) |
| Rapid Traverse Z | 15,000 mm/min (591 ipm) |
| Cutting Feed Rate | 1 ~ 8,000 mm/min (0.04 ~ 315 ipm) |
| Tool Capacity | 32 (60 / 90 / 120 Opt.) |
| Max Tool Diameter (full magazine) | Ø127 / Ø215 mm (Ø5.0 / Ø8.5 in) |
| Max Tool Length | 350 mm (13.8 in) |
| Max Tool Weight | 20 kg (44 lb) |
| Positioning Accuracy Jis B 6338 | ± 0.015 mm / Full Travel |
| Positioning Accuracy VDI 3441 | P ≤ 0.040 mm / Full Travel |
| Repeatability Jis B 6338 | ± 0.003 mm |
| Repeatability VDI 3441 | Ps ≤ 0.030 mm |
| Air Pressure Requirement | 5 ~ 8 (5) kg/cm² |
| Hydraulic Tank Capacity | 120 liter (10 HP) |
| Lubrication Tank Capacity | 6 liter |
| Coolant Tank Capacity | 650 liter (1.5 HP) |
| Machine Weight | 42,000 kg (92,593 lb) |
Specifications sourced from awea.com — verified 2026-10-04
Strengths & Limitations
Strengths
- 5,020 x 2,010 mm (197.6 x 79.1 in) table rated for 15,000 kg (33,069 lb)
- One-piece base on 4 guide ways, enlarged with the travel so the table does not overhang
- Centre-driven X axis with a ball screw vibration absorber
- Y and Z rapids remain 15,000 mm/min (591 ipm) at this length
- JIS repeatability of ± 0.003 mm
Limitations
- X rapid of 10,000 mm/min (394 ipm); the LP-4021YF is listed at 15,000 mm/min (591 ipm)
- Cutting feed is capped at 8,000 mm/min (315 ipm)
- VDI positioning widens to P ≤ 0.040 mm over full travel
- 42,000 kg (92,593 lb) of machine to found and install
Best For
Frequently Asked Questions
01
AWEA's table simply lists a lower figure as the travel grows: 20,000 mm/min (787 ipm) on the LP-3021YF, 15,000 mm/min (591 ipm) on the LP-4021YF and 10,000 mm/min (394 ipm) on the LP-5021YF. The maker also fits a vibration absorber to reduce the vibration of the long ball screw, which points to the screw length as the limiting part.
02
1 ~ 8,000 mm/min (0.04 ~ 315 ipm). That sits between the LP-4021YF at 1 ~ 10,000 mm/min (0.04 ~ 394 ipm) and the LP-6021YF at 1 ~ 5,000 mm/min (0.04 ~ 197 ipm).
03
On a one-piece base with 4 guide ways. AWEA says the base is enlarged proportional to the length of the travel to eliminate table overhang while keeping structural support. The X and Y axes run on roller type linear guide ways.
04
15,000 kg (33,069 lb) on a 5,020 x 2,010 mm (197.6 x 79.1 in) table. The next step up in load at this X travel is the LP-5025YF, rated for 18,000 kg (39,683 lb) on a 5,020 x 2,400 mm (197.6 x 94.5 in) table.
05
Under VDI, P ≤ 0.040 mm over full travel with repeatability of Ps ≤ 0.030 mm. Under JIS, ± 0.015 mm over full travel with repeatability of ± 0.003 mm. The VDI figures are wider than those of the LP-3021YF, which is listed at P ≤ 0.025 mm.
More from AWEA
Other 5-Axis Machining Centers
Breton Hawx E1 K40
Hedelius TILTENTA 11-2600
DN Solutions BM 2035 U
Makino MCD2016-5XB
Starrag LX 051
