Anger Machining SK800T
Key Specifications
Max Spindle
Spindle Taper
Tool Capacity
Table Size
Spindle Power
Accuracy
How much does the Anger Machining SK800T cost?
Price estimate
We do not have a price for the Anger Machining SK800T that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
A C-axis that spins at 1,000 rpm turns the Anger Machining SK800T from a 5-axis mill into a mill-turn gantry. Anger describes it as a high-speed C-axis for turning operations, and the tool interface changes with it to HSK63T, with HSK100T in brackets.
The appeal is doing turned and milled features in one clamping. An engine blisk or housing can have its bores and faces turned and its pockets, slots or blade profiles milled in 5 axes without leaving the table. The table is ø800 mm, takes 1,300 kg (2,866 lb) and parts up to ø900x500 mm; whether a given part may run at full C-axis speed at that weight is a question for Anger.
Spindle figures are narrower than on the SK800TR: 12,000 - 24,000 rpm, 30-50/38-76 kW and 88-200/123-302 Nm (S1/S6-60%). Linear axes are unchanged, with 800 mm (31.5 in) of X, 830 mm (32.7 in) of Y and 560 mm (22.0 in) of Z, rapids of 48/48/48 m/min and acceleration of 4/4/4 m/s². Positioning accuracy is stated as 0.008 mm and repeatability as 0.005 mm as per VDI 3441.
Chip-to-chip time is 26 s, so the process should be planned around few tool changes. The structure is the SK design: closed U-frame gantry, direct drive motors on the A and C axes, A-axis supported on both sides. Weight is 15,500 kg (34,171 lb) and connected power 80 kVA.
Full Specifications
| Parameter | Value |
|---|---|
| Number of Axes | 5 |
| X Axis Travel | 800 mm (31.5 in) |
| Y Axis Travel | 830 mm (32.7 in) |
| Z Axis Travel | 560 mm (22.0 in) |
| Max Part Size | ø900x500 mm (ø35.4x19.7 in) |
| Axis Acceleration Xyz | 4/4/4 m/s² |
| Rapid Traverse Xyz | 48/48/48 m/min (1,890/1,890/1,890 ipm) |
| C Axis Speed | 1,000 rpm |
| Positioning Accuracy | 0.008 mm (0.00031 in), X/Y/Z as per VDI 3441 |
| Repeatability | 0.005 mm (0.00020 in), X/Y/Z as per VDI 3441 |
| Max Spindle Speed | 12,000 - 24,000 rpm |
| Spindle Motor Power | 30-50/38-76 kW (S1/S6-60%) |
| Spindle Torque | 88-200/123-302 Nm (S1/S6-60%) |
| Spindle Taper | HSK63T (HSK100T) |
| Tool Capacity | HSK63:32(64) HSK100:24(60) pcs. |
| Max Tool Diameter (full magazine) | 75 (120)/ HSK100:125/125 mm |
| Tool Length | 300 (HSK100:350) mm |
| Tool Weight | 8 (HSK100:15) kg |
| Chip to Chip Time | 26 s (at 1,800 rpm) |
| Table Size | ø800 mm (ø31.5 in) |
| T-Slot Width | 14 mm (0.6 in) |
| Max Table Load | 1,300 kg (2,866 lb) |
| Machine Weight | 15,500 kg (34,171 lb) |
| Machine Dimensions | 6,826/5,125/3,509 mm (268.7/201.8/138.1 in) |
| Operating Voltage | 3x380 V |
| Power Requirement | 80 kVA |
| CNC Control | Siemens, Heidenhain |
| Lubrication | KSS |
Specifications sourced from anger-machining.com — verified 2026-10-05
Strengths & Limitations
Strengths
- C-axis speed of 1,000 rpm for turning operations
- Spindle torque of 88-200/123-302 Nm (S1/S6-60%)
- HSK63T or HSK100T tool holders
- Table load of 1,300 kg with parts up to ø900x500 mm
- 0.008 mm positioning accuracy and 0.005 mm repeatability as per VDI 3441
Limitations
- Chip-to-chip time of 26 s penalises frequent tool changes
- Spindle power range of 30-50/38-76 kW is narrower than the 20-60/24-76 kW of the SK800TR
- Acceleration of 4/4/4 m/s² on the linear axes
- Needs 6,826/5,125/3,509 mm (L/W/H) of floor space
Best For
Frequently Asked Questions
01
Yes. Anger lists efficient turning as a key advantage and says the SK800T features a high-speed C-axis for turning operations. The table gives the C-axis 1,000 rpm, against 70 rpm on the SK800TR, and lists HSK63T and HSK100T tool holders.
02
12,000 - 24,000 rpm, 30-50/38-76 kW and 88-200/123-302 Nm, the power and torque as S1/S6-60% ranges. A footnote to the table says 7 spindle variants are available, so the figures depend on the variant ordered.
03
Parts up to ø900x500 mm and 1,300 kg (2,866 lb) on a ø800 mm table with 14 mm T-slots. A second footnote says the table is available in different versions. Travels are 800 mm, 830 mm and 560 mm in X, Y and Z.
04
HSK63 tools: 32, with 64 as the bracketed figure, up to 300 mm long and 8 kg. HSK100 tools: 24, with 60 as the bracketed figure, up to 350 mm long and 15 kg. The tool holder row for this model reads HSK63T (HSK100T).
05
Both combine 5-axis milling with turning. The SK800T is a vertical gantry for parts up to ø900x500 mm and 1,300 kg with a 1,000 rpm C-axis. The HS1400T is a horizontal machine for parts up to ø1,800/1,200 mm and 3,200 kg, with 700 rpm on its turning axis.
More from Anger Machining
Other 5-Axis Machining Centers
Fidia Linea C3
Pinnacle BX700DD
AWEA LP-3016YZF
Hermle G 500
