Vision Wide Vertical Machining Centers (VMC)

Vision Wide NF-4032 / NF-4039

Q: How much does the Vision Wide NF-4032 / NF-4039 cost?

The price estimate for the Vision Wide NF-4032 / NF-4039 is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/vision-wide-nf-4032-nf-4039#price; the request is passed to Vision Wide or an authorised dealer.

Specs verified 2026-10-04 · visionwide-tech.com Updated 2026-10-04

Image: visionwide-tech.com, Vision Wide

Key Specifications

Table Size

4,000×2,450 mm (157.5×96.5 in)

x axis travel

4,100 mm (161.4 in)

y axis travel

3,200/ 3,900 mm (126.0/ 153.5 in)

z axis travel box way single ballscrew

920 / 1,020 mm (36.2 / 40.2 in)(Opt.)

z axis travel linear way enclosed box ram dual ballscrews

1,000 mm (39.4 in)(Opt.) / 1,200 mm (47.2 in)(Opt.) / 1,400 mm (55.1 in)(Opt.)

max table load

16,000 kg (35,273 lb)

How much does the Vision Wide NF-4032 / NF-4039 cost?

Price estimate

Uncertain

We do not have a price for the Vision Wide NF-4032 / NF-4039 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.

Overview

Of the three attachment heads Vision Wide lists for the NF series, the universal head asks the most of the machine, and the Vision Wide NF-4032 / NF-4039 has the travel to use it. Y is 3,200 mm (126.0 in) on the NF-4032 and 3,900 mm (153.5 in) on the NF-4039, over a 4,000×2,450 mm (157.5×96.5 in) table.

A 90º head cuts square side faces. An extension head reaches into deep cavities. A universal head tilts and swivels the tool to an angle, for chamfered faces, inclined bores and angled pads. The feature list also names an AC 3-axis mechanical coordinates system. The page does not explain the term further; it reads as the machine tracking the tool point through the head's A and C angles so that programs can be written in part coordinates.

All three heads are changed automatically, according to the same list. That is what lets a part be roughed with the vertical spindle, squared up with the 90º head and finished on its angled faces without a manual changeover.

X travel is 4,100 mm (161.4 in) and the table load is 16,000 kg (35,273 lb). X/Y rapid is 18 m/min. Spindle speed is 4,000 rpm as standard and the control is a FANUC 0iMF PLUS.

Full Specifications

Parameter	Value
X Axis Travel	4,100 mm (161.4 in)
Y Axis Travel	3,200/ 3,900 mm (126.0/ 153.5 in)
Z Axis Travel Box Way Single Ballscrew	920 / 1,020 mm (36.2 / 40.2 in)(Opt.)
Z Axis Travel Linear Way Enclosed Box Ram Dual Ballscrews	1,000 mm (39.4 in)(Opt.) / 1,200 mm (47.2 in)(Opt.) / 1,400 mm (55.1 in)(Opt.)
Table Size	4,000×2,450 mm (157.5×96.5 in)
Max Table Load	16,000 kg (35,273 lb)
Spindle Power Cont 30 Min	18.5/22 kW (24.8/29.5 hp)(22/26 kW (29.5/34.9 hp) Opt.)(30/37 kW (40.2/49.6 hp) Opt.)
Spindle Speed Box Way 2 Step Gear	4,000 / 6,000 rpm(Opt.)
Spindle Speed Linear Way Enclosed Box Ram 2 Step Gear	4,000 / 6,000 rpm(Opt.)
Spindle Speed Linear Way Enclosed Box Ram Direct Driven	10,000 rpm(Opt.)
Cutting Feed Rate	1-10,000 mm/min
Rapid Traverse Xy	18 m/min
Rapid Traverse Z Box Way or Linear Way	15 m/min
Rapid Traverse Z Enclosed Box Ram	12 m/min
Tool Capacity Vertical Tool Change	32 / 40 pcs (Opt.) / 60 pcs (Opt.)
Tool Capacity Floor Standing Vertical Tool Change	32 pcs(Opt.) / 40 pcs (Opt.) / 60 pcs (Opt.)
Tool Capacity Floor Standing Vertical Horizontal Tool Change	32 pcs(Opt.) / 40 pcs (Opt.) / 60 pcs (Opt.)

Specifications sourced from visionwide-tech.com — verified 2026-10-04

Strengths & Limitations

Strengths

Auto head change covering 90º, extension and universal heads
Y travel of 3,200 mm (126.0 in) or 3,900 mm (153.5 in)
4,000×2,450 mm (157.5×96.5 in) table for 16,000 kg (35,273 lb)
AC 3-axis mechanical coordinates system is listed among the features

Limitations

The maker's page does not explain the AC coordinates feature
X/Y rapid of 18 m/min is lower than on the three-metre NF
Standard spindle speed is 4,000 rpm

Best For

Parts with angled faces and inclined bores Deep cavities reached with an extension head Five-face machining up to 16,000 kg (35,273 lb)

Frequently Asked Questions

01 Which attachment heads does the Vision Wide NF-4032 support?

The NF feature list reads: auto head change, 90º head, extension head, universal head. It adds a vertical and horizontal auto tool change for the 90º head and an AC 3-axis mechanical coordinates system.

02 What are the travels of the NF-4032 / NF-4039?

X travel is 4,100 mm (161.4 in). Y travel is 3,200/ 3,900 mm (126.0/ 153.5 in) for the NF-4032 and NF-4039. Z travel on the standard box way head is 920 mm.

03 Is the NF-4032 a 5-axis machine?

Vision Wide calls the NF a bridge-type 5 face machining center. Five-face work is done by positioning attachment heads; the page does not claim simultaneous five-axis contouring.

04 What does the NF-4032 table carry?

16,000 kg (35,273 lb) on a 4,000×2,450 mm (157.5×96.5 in) table. That matches the NF-4026, which has 2,600 mm (102.4 in) of Y travel.