Vision Wide Vertical Machining Centers (VMC)

Vision Wide SF-4120

Q: How much does the Vision Wide SF-4120 cost?

The price estimate for the Vision Wide SF-4120 is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/vision-wide-sf-4120#price; the request is passed to Vision Wide or an authorised dealer.

Specs verified 2026-10-04 · visionwide-tech.com Updated 2026-10-04

Image: visionwide-tech.com, Vision Wide

Key Specifications

Table Size

4,000x1,800 mm (157.5x70.9 in)

x axis travel

4,100 mm (161.4 in)

y axis travel

2,000 mm (78.7 in)

z axis travel box way

800 /1,020 mm (31.5 /40.2 in) (Opt.)

z axis travel linear way

800 /1,000 mm (31.5 /39.4 in) (Opt.)

max table load

12,000 kg (26,455 lb)

How much does the Vision Wide SF-4120 cost?

Price estimate

Uncertain

We do not have a price for the Vision Wide SF-4120 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.

Overview

The Vision Wide SF-4120 is as large as the lighter SF frame goes: 4,100 mm (161.4 in) of X travel, 2,000 mm (78.7 in) of Y and a 4,000x1,800 mm (157.5x70.9 in) table rated for 12,000 kg (26,455 lb).

Beyond this size the series changes character. The SF-4122 has the same X travel, but its table is 4,300×2,100 mm (169.3×82.7 in) and carries 16,000 kg (35,273 lb). A buyer whose parts sit near 12,000 kg should look at that machine before settling on this one, because fixtures and clamps count against the rating too.

Where the SF-4120 holds an advantage is cross-axis speed. Its rapid traverse row reads X/Y/Z：18/24/15 m/min. The table axis is the slow one at 18 m/min, but the saddle still moves at 24 m/min. For work with many short Y moves, such as rows of pockets across a wide plate, that helps.

Spindle and tooling follow the rest of the series. The motor is 18.5/22 kW (24.8/29.5 hp), the geared spindle turns 6,000 rpm, and the magazine row gives 32/40 pcs(Opt.). Cutting feed is 1-10,000 mm/min.

Full Specifications

Parameter	Value
X Axis Travel	4,100 mm (161.4 in)
Y Axis Travel	2,000 mm (78.7 in)
Z Axis Travel Box Way	800 /1,020 mm (31.5 /40.2 in) (Opt.)
Z Axis Travel Linear Way	800 /1,000 mm (31.5 /39.4 in) (Opt.)
Table Size	4,000x1,800 mm (157.5x70.9 in)
Max Table Load	12,000 kg (26,455 lb)
Spindle Power Cont 30 Min	18.5/22 kW (24.8/29.5 hp) (22/26 kW (29.5/34.9 hp) Opt.)
Spindle Speed Box Way 2 Step Gear	6,000/4,000 rpm(Opt.)
Spindle Speed Linear Way Direct Driven	10,000 rpm(Opt.)/ 12,000 rpm(Opt.)
Spindle Speed Linear Way Built in	10,000 rpm(Opt.)
Cutting Feed Rate	1-10,000 mm/min
Rapid Traverse Xyz	X/Y/Z：18/24/15 m/min
Tool Capacity Vertical Tool Change	32/40 pcs(Opt.)

Specifications sourced from visionwide-tech.com — verified 2026-10-04

Strengths & Limitations

Strengths

4,000x1,800 mm (157.5x70.9 in) table, the largest of the lighter SF frame
12,000 kg (26,455 lb) table load
Y rapid of 24 m/min, unchanged from the shorter machines
Optional 22/26 kW (29.5/34.9 hp) spindle motor for heavier cuts

Limitations

X rapid drops to 18 m/min on this length
The SF-4122 carries 16,000 kg (35,273 lb) on the same X travel
Z travel is 800 mm unless the longer stroke is ordered

Best For

Long plates and frames up to 12,000 kg (26,455 lb) Rows of pockets or holes across a wide plate Batch setups of several molds along 4,100 mm (161.4 in) of X

Frequently Asked Questions

01 Should I choose the Vision Wide SF-4120 or the SF-4122?

Both have 4,100 mm (161.4 in) of X. The SF-4120 has 2,000 mm (78.7 in) of Y and carries 12,000 kg (26,455 lb). The SF-4122 has 2,200 mm (86.6 in) of Y and a 16,000 kg (35,273 lb) table. Weight and width decide it.

02 What are the rapid traverse rates of the SF-4120?

Vision Wide lists X/Y/Z：18/24/15 m/min. X, the table axis, is slower than on the shorter machines of this group, which list 24 m/min for X and Y.

03 What is the SF-4120 table size?

The table measures 4,000x1,800 mm (157.5x70.9 in). X travel of 4,100 mm (161.4 in) and Y travel of 2,000 mm (78.7 in) both extend past the table edges.

04 What controller is fitted to the SF-4120?

The standard accessory list for the SF series names the FANUC 0iMF PLUS controller. No other control appears in the SF accessory lists on the maker's page.